Thingiverse
![Leg for 2020 by napierm](/previews/8909594.jpg)
Leg for 2020 by napierm
by Thingiverse
Last crawled date: 3 years, 1 month ago
Nice leg for 2020 extrusion. Add height and level adjustment. Tap extrusion deeply for M5. Use M5x14 socket head screw (Misumi, others). Rest of hardware from Home Depot. Glide leg is Everbilt SKU 193637. Coupling nut (near threaded rods) 1/4-20x7/8 is Everbilt SKU 822251.
Print round side down, 2 shells and 40% infill.
Note there are 2 thin shelves in the hole to aid the slicer in printing. They clean out easily.
https://youtu.be/d93sBPWYqKY
Put the screw in first and the nut is a press fit. The screw is tightened with an allen wrench through the nut. Works great. Could use a 1/4-20 jam nut to secure. Could use some rubber under the foot as well.
Print round side down, 2 shells and 40% infill.
Note there are 2 thin shelves in the hole to aid the slicer in printing. They clean out easily.
https://youtu.be/d93sBPWYqKY
Put the screw in first and the nut is a press fit. The screw is tightened with an allen wrench through the nut. Works great. Could use a 1/4-20 jam nut to secure. Could use some rubber under the foot as well.
Similar models
thingiverse
free
![2020 Corner Bracket by Zaanuo](/t/5044075.jpg)
2020 Corner Bracket by Zaanuo
... them for piece of mind.
printed with 4 walls / top / bottom layers, 25% infill.
uses:
(2) 4 mm machine screws.
(2) 4 mm t-nuts.
thingiverse
free
![2020 extrusion legs by rewp](/t/8183744.jpg)
2020 extrusion legs by rewp
...er now. these are slightly shorter and easier to print.
printed in carbon fiber pla for added strength
m3x10 screws with t-nuts
thingiverse
free
![Rubber-Tip Wall Door Stop](/t/4912665.jpg)
Rubber-Tip Wall Door Stop
...tip (sku 767 825), shortened to 1/2 in. high. base dimensions are 2-1/8 in. wide and 3/8 in. high, with a cavity 1-1/4 in. wide.
thingiverse
free
![Logitech C920 mount for 2020 extrusion by gregington](/t/10254119.jpg)
Logitech C920 mount for 2020 extrusion by gregington
...0 webcam for 2020 extrusion. use 2 8mm m5 bolts and t nuts to attach to extrusion and 1/4" unc bolt to attach to the webcam.
thingiverse
free
![t-nut for 2020 extrusion with 5mm slot by abolibibelot69](/t/8756312.jpg)
t-nut for 2020 extrusion with 5mm slot by abolibibelot69
...with 5mm slot by abolibibelot69
thingiverse
t-nut for 2020 aluminium extrusion with 5mm slot. it can be used with m3x8mm screws.
grabcad
free
![T Nut 2020 Extrusion](/t/11060541.jpg)
T Nut 2020 Extrusion
...d
t nut for 2020 extrusion with m3 and m5 screw spacing. after inserting the screw thread will be made on the inner wall of nut.
thingiverse
free
![2020 extrusion Corner Feet for 3D printer](/t/4866709.jpg)
2020 extrusion Corner Feet for 3D printer
... off of the corner brackets made for 2020 extrusion. made to use with hex screw and t-nuts
printed in tpu and 20% infill or less
thingiverse
free
![#4 T-Nut for 2020 Extrusion by jacob2040](/t/10231810.jpg)
#4 T-Nut for 2020 Extrusion by jacob2040
...oot. if so, i would print on a raft.
there is also the cad file if you need to edit it.
after printing put the nut into the hole.
thingiverse
free
![2020 Extrusion Mounts by skyking83](/t/8245048.jpg)
2020 Extrusion Mounts by skyking83
...ng:2194278
things you'll need:
(1) horizontal or vertical mount
(1) m5 nut
(2) m4 x 12mm flush head screws
(2) m4 t-slot nuts
thingiverse
free
![Right Angle Bracket for 2020 extrusion by dcgtek](/t/9040150.jpg)
Right Angle Bracket for 2020 extrusion by dcgtek
... 2020 extrusion by dcgtek
thingiverse
this is a right angle bracket that connects to 2020 extrusions using m5 screws and t-nuts.
Napierm
thingiverse
free
![3UP version 1.5.1 x-slider with supports by napierm](/t/8948307.jpg)
3UP version 1.5.1 x-slider with supports by napierm
...added thin supports to x-slider-a so it can be printed easier standing upright. it is much stronger printed in this orientation.
thingiverse
free
![Gusset Plate by napierm](/t/8911369.jpg)
Gusset Plate by napierm
...own to print. really helps to stiffen up a frame.
trimcraft rc has very good prices on socket head and button head m5x10 screws.
thingiverse
free
![Z slider A back by napierm](/t/8909964.jpg)
Z slider A back by napierm
... with at least 300mm travel in each axis. so far the build is progressing well. will publish a bom when it is actually working.
thingiverse
free
![3UP Z bracket A2 thickened by napierm](/t/8903778.jpg)
3UP Z bracket A2 thickened by napierm
...nto pockets to make them less likely to strip out. print with 2 shells and 40% hex infill. use an m3x10 screw to seat the nuts.
thingiverse
free
![LRI Probe by napierm](/t/8877742.jpg)
LRI Probe by napierm
...nt to cover over the airspeed numbers. use white, red, green, and yellow testors paint to color the lri gauge. works perfectly.
thingiverse
free
![3UP Z bracket B Idler Pulley by napierm](/t/8913409.jpg)
3UP Z bracket B Idler Pulley by napierm
...e scaled as needed to align the pulley with the belt. the peg needs a m3x30 ss socket head screw -> trimcraft rc is a source.
thingiverse
free
![Core XY for 3UP by napierm](/t/8908089.jpg)
Core XY for 3UP by napierm
...it from bottoming out. you will also need a belt that is longer to account for the cross between the two driving stepper motors.
thingiverse
free
![3UP Printer XY Bearing parts for 608 BB by napierm](/t/8911332.jpg)
3UP Printer XY Bearing parts for 608 BB by napierm
...nd don't want to buy more parts. bought 16 608rs bearings (they are cheap) and might as well use them though out the design.
2020
3d_export
$5
![cyberpunk 2020](/t/11920119.jpg)
cyberpunk 2020
...cyberpunk 2020
3dexport
cyberpunk 2020
3d_export
$5
![monster01 2020](/t/11899555.jpg)
monster01 2020
...monster01 2020
3dexport
monster01 2020 dxf file rigged in mixamo.
3d_export
$129
![explorer 2020](/t/13107187.jpg)
explorer 2020
...explorer 2020
3dexport
3d_export
$5
![mug 2020](/t/11504913.jpg)
mug 2020
...mug 2020
3dexport
3d_export
$15
![3 rims 2020](/t/11888973.jpg)
3 rims 2020
...3 rims 2020
3dexport
new rims 2020 from inventor
turbosquid
$7
![Keepsake of 2020](/t/13507072.jpg)
Keepsake of 2020
...ty free 3d model keepsake of 2020 for download as obj and stl on turbosquid: 3d models for games, architecture, videos. (1657350)
3d_export
$35
![landrover 2020](/t/11388314.jpg)
landrover 2020
...landrover 2020
3dexport
turbosquid
$15
![Timeless 2020](/t/13485047.jpg)
Timeless 2020
...free 3d model timeless 2020 for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1433362)
turbosquid
$85
![Q8 2020](/t/13355875.jpg)
Q8 2020
... free 3d model audi q8 2020 for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1559582)
turbosquid
$59
![Supra 2020](/t/13497487.jpg)
Supra 2020
...ee 3d model supra 2020 for download as max, lwo, obj, and c4d on turbosquid: 3d models for games, architecture, videos. (1404492)
Leg
3d_ocean
$10
![Furniture Legs](/t/40670.jpg)
Furniture Legs
...furniture legs
3docean
furniture furniture legs leg legs metal leg
furniture legs,legs,
archibase_planet
free
![Leggings](/t/952632.jpg)
Leggings
...eggings
archibase planet
leggings gaiters gaiter clothes
leggings n140713 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_ocean
$4
![Chicken legs](/t/369417.jpg)
Chicken legs
...chicken legs
3docean
3ds arman3dg chicken chicken legs games legs low max poly
chicken legs…
turbosquid
$1
![legging](/t/13318983.jpg)
legging
...ng
turbosquid
royalty free 3d model legging for download as on turbosquid: 3d models for games, architecture, videos. (1569799)
3d_export
$25
![table leg](/t/11492659.jpg)
table leg
...table leg
3dexport
table leg with ram
turbosquid
$19
![Leg](/t/13430338.jpg)
Leg
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
![lion leg](/t/11461623.jpg)
lion leg
...lion leg
3dexport
3d lion leg for cabinet
3d_export
$5
![table leg](/t/11487749.jpg)
table leg
...table leg
3dexport
table leg for wood milling machine
3ddd
$1
![Leg Exercise](/t/932807.jpg)
Leg Exercise
...leg exercise
3ddd
тренажер
leg exercise equipment fitness
3d_export
$5
![two-legged hook](/t/11489418.jpg)
two-legged hook
...two-legged hook
3dexport
two-legged hook