Thingiverse
![Left handed duplicator 6 blower cooling duct by RedEyedRaven](/previews/8740000.jpg)
Left handed duplicator 6 blower cooling duct by RedEyedRaven
by Thingiverse
Last crawled date: 3 years, 1 month ago
So another cooling duct modification/upgrade for the wanhao duplicator 6.
It REALLY needs more air then stock but there is not a lot of room to add a blower on the right side if you have a enclosure. and radial fans just are so weak.
SO, I put a 40x40x20mm blower on the left side :)
Gdstime 4cm 40mm 24v Dc Brushless Blower Cooling Fan
One issue is I made a clip (middle top tab) that only works on the Swiss hot end upgrade heat sink (it has different spacing then the stock heat sink fins) I might take that out entirely as it was to ensure no sag but the petg I printed it with is working fine. (also have a boot which IMO is a must! for best printing)
The heater core wires get hot and can deform any cooler that is close in, but again this is working just fine.
This is a first draft and I have one prototype running on my system currently.
Feel free to comment, offer suggestions, or make a remix.
It REALLY needs more air then stock but there is not a lot of room to add a blower on the right side if you have a enclosure. and radial fans just are so weak.
SO, I put a 40x40x20mm blower on the left side :)
Gdstime 4cm 40mm 24v Dc Brushless Blower Cooling Fan
One issue is I made a clip (middle top tab) that only works on the Swiss hot end upgrade heat sink (it has different spacing then the stock heat sink fins) I might take that out entirely as it was to ensure no sag but the petg I printed it with is working fine. (also have a boot which IMO is a must! for best printing)
The heater core wires get hot and can deform any cooler that is close in, but again this is working just fine.
This is a first draft and I have one prototype running on my system currently.
Feel free to comment, offer suggestions, or make a remix.
Similar models
thingiverse
free
![Volcano 30 mm Part Cooling Fan by John21](/t/8311479.jpg)
Volcano 30 mm Part Cooling Fan by John21
...for a volcano style hot end, and should be able to mount too just about any printer that uses a 30 mm fan for heat sink cooling.
thingiverse
free
![Hot End Cooling Duct](/t/4700768.jpg)
Hot End Cooling Duct
...ing duct which still needs to be designed.
this is my first design to be uploaded to thingiverse, so any feedback is appreciated.
thingiverse
free
![Creality Stock Hotend Mount & Part cooling with BLT & EZABL (BRACKET FOR FAN BLOWER ENDER 3 V2) by raflisag](/t/8004684.jpg)
Creality Stock Hotend Mount & Part cooling with BLT & EZABL (BRACKET FOR FAN BLOWER ENDER 3 V2) by raflisag
...ou may need some solder or hot nail to create hole in hot end duct, but for the fan blower bracket and duct it's work fine :)
thingiverse
free
![Fitz Ci3 Cooler (Duplicator I3 V2.1) by MakerFitz](/t/8538799.jpg)
Fitz Ci3 Cooler (Duplicator I3 V2.1) by MakerFitz
...lative to the extruder carriage. this duct work fits a 75x75x30mm radial (blower) fan that i was able to get off amazon for ~$5.
thingiverse
free
![40mm Fan Duct for E3D hot-end by butters](/t/8954941.jpg)
40mm Fan Duct for E3D hot-end by butters
...i also printed a simple fan guard that will hopefully stop me from jamming screwdrivers into the fan blades (rip 3 prior fans...)
thingiverse
free
![Chiron Volcano/Stock 5015 ducts - Endstop - Probe spacer by cana3dprint](/t/5031335.jpg)
Chiron Volcano/Stock 5015 ducts - Endstop - Probe spacer by cana3dprint
...s and then remove it. it is too close to the heat block that any materials you can print on a standard 3d printer will just melt.
thingiverse
free
![Creality Ender 6 Hot End & Part Cooling Duct by Crafted](/t/8032679.jpg)
Creality Ender 6 Hot End & Part Cooling Duct by Crafted
...ses all existing fasteners and fans. fits the creality ender 6 carriage. uses existing screw holes. fits with factory hot end.
thingiverse
free
![Duplicator 4, Blower duct by Sam_E](/t/8962421.jpg)
Duplicator 4, Blower duct by Sam_E
...e 40x40x10 fan used previously so cools much better, great for larger overhangs. but the downside is it is a bit noisier as well.
thingiverse
free
![e3d titan dual blower fan duct by ntinaras](/t/8277961.jpg)
e3d titan dual blower fan duct by ntinaras
...8672 , i have included the fusion 360 file with the hotend and fan adapter, if it shows huge on your slicer just scale it to 10 %
thingiverse
free
![Lulzbot mini - dual fan plus heat sink fan by gigrichj_2145](/t/8766453.jpg)
Lulzbot mini - dual fan plus heat sink fan by gigrichj_2145
...reat.
to print the dual fan, print as shown in the stl picture with support from the build plate to bottom of fan only....
cheers
Redeyedraven
thingiverse
free
![Drago-Rex by RedEyedRaven](/t/672614.jpg)
Drago-Rex by RedEyedRaven
...the model in an acetone vapor to smooth, then paint.
with pla you can just glue.
sla/lcd resin just print the full part
have fun.
thingiverse
free
![Lion Skull by RedEyedRaven](/t/9013491.jpg)
Lion Skull by RedEyedRaven
... body made it look right or left :)
(sorry minor hiccup i uploaded the top skull all in one file. now seperated right and left)
thingiverse
free
![Silicon Boot for Wanhao Duplicator 6 (split) by RedEyedRaven](/t/8692809.jpg)
Silicon Boot for Wanhao Duplicator 6 (split) by RedEyedRaven
...sier. also, i added raised areas in the core to make core removal easier (cut along the ridges.)
just used it and it worked fine.
thingiverse
free
![Goggle mount for Adafruit NeoPixel Ring by RedEyedRaven](/t/9015817.jpg)
Goggle mount for Adafruit NeoPixel Ring by RedEyedRaven
... sharpie to color it black and it blocks enough light from the leds to be able to see though the goggles with little distraction.
thingiverse
free
![Wanhao D6 Cooling Fan/Shroud Lefty v2 by RedEyedRaven](/t/8704697.jpg)
Wanhao D6 Cooling Fan/Shroud Lefty v2 by RedEyedRaven
...robably needs quite a bit of tuning but seems to work well with this fan.
added step file so people can mod this is a test model.
Duplicator
turbosquid
$10
![duplicate](/t/13317238.jpg)
duplicate
...
turbosquid
royalty free 3d model duplicate for download as on turbosquid: 3d models for games, architecture, videos. (1566034)
turbosquid
$20
![Wonderful duplicate kids room](/t/13466070.jpg)
Wonderful duplicate kids room
...ul duplicate kids room for download as skp, 3ds, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1609462)
archive3d
free
![Copier 3D Model](/t/1087117.jpg)
Copier 3D Model
...hine duplicating machine
copier n160808 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$30
![connect four set](/t/11425454.jpg)
connect four set
...ate objects that can be disassembled. includes one red and one black checker which can be duplicated to the standard 42 checkers.
3ddd
$1
![Черепица](/t/825696.jpg)
Черепица
...del
- put it in your scene and duplicate
- level of detail can be edited
- open with 3ds max 2010-2013 or import in your program.
3d_export
$27
![Dividing Cell / Ovule 3D Model](/t/129590.jpg)
Dividing Cell / Ovule 3D Model
...al microbe blob ovum fiction science ovule duplication divide dividing
dividing cell / ovule 3d model duchampmodels 9691 3dexport
3d_ocean
$16
![Folding Chair](/t/15440.jpg)
Folding Chair
...tubing. designed to be good low poly at a distance and mesh smooth pretty well and light weight for duplicating a lot. package...
3d_export
$8
![wooden fence](/t/11416032.jpg)
wooden fence
... one post separate so the fence can be duplicated and extended. created in blender 3.0 file format fbx with texture painted maps.
3d_export
$8
![wooden fence](/t/11416045.jpg)
wooden fence
... one post separate so the fence can be duplicated and extended. created in blender 3.0 file format fbx with texture painted maps.
3d_ocean
$2
![DNA Strands Of 5 Types](/t/569193.jpg)
DNA Strands Of 5 Types
... strands that can be multiplied and can be made long chains by duplicating them and can be easily applied materials and textures.
Blower
3d_export
$5
![ball blower](/t/11920384.jpg)
ball blower
...ball blower
3dexport
ball blower
3d_export
$10
![engine blower assambly](/t/11927964.jpg)
engine blower assambly
...engine blower assambly
3dexport
engine blower assambly
3d_export
$5
![air pipe blower](/t/11920380.jpg)
air pipe blower
...air pipe blower
3dexport
air pipe blower
3d_export
$5
![air hand blower](/t/11920381.jpg)
air hand blower
...air hand blower
3dexport
air hand blower
3d_export
$5
![Blower Boom 3D Model](/t/44866.jpg)
Blower Boom 3D Model
...blower boom 3d model
3dexport
boom blower
blower boom 3d model bkl1989 63079 3dexport
turbosquid
$44
![blower-dxf](/t/13421035.jpg)
blower-dxf
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$39
![Old Blower](/t/13448890.jpg)
Old Blower
...l old blower for download as ma, max, gltf, fbx, obj, and stl on turbosquid: 3d models for games, architecture, videos. (1638848)
3d_export
$7
![zy series centrifugal blower](/t/11715504.jpg)
zy series centrifugal blower
...zy series centrifugal blower
3dexport
zy series centrifugal blower
3d_export
$5
![root blower compressor](/t/11462737.jpg)
root blower compressor
...oot blower compressor
3dexport
you will get both .stl and .sldprt format of root blower compressor from here at very cheap rate.
turbosquid
$5
![V8 engine with blower](/t/13257674.jpg)
V8 engine with blower
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Duct
turbosquid
$19
![Duct Set](/t/13339231.jpg)
Duct Set
...d
royalty free 3d model duct set for download as max and fbx on turbosquid: 3d models for games, architecture, videos. (1145038)
turbosquid
$10
![Duct Tape](/t/13400570.jpg)
Duct Tape
...id
royalty free 3d model duct tape for download as ma and ma on turbosquid: 3d models for games, architecture, videos. (1580351)
turbosquid
free
![Duct Tape](/t/13347830.jpg)
Duct Tape
...
free 3d model duct tape for download as obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1486518)
3d_ocean
$7
![Air-duct](/t/572083.jpg)
Air-duct
... ventilation
high quality industrial air duct ventilation model. created in cinema 4d but comes in various other formats as well.
turbosquid
$20
![Air ducts](/t/13277959.jpg)
Air ducts
...lty free 3d model air ducts for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1262476)
3d_export
$10
![Supply air duct](/t/11415786.jpg)
Supply air duct
...supply air duct
3dexport
supply air duct with two axial fans and hangers
turbosquid
$2
![Duct Tape](/t/13347833.jpg)
Duct Tape
...e 3d model duct tape for download as obj, fbx, blend, and dae on turbosquid: 3d models for games, architecture, videos. (1473972)
turbosquid
free
![Duct Tape](/t/13365134.jpg)
Duct Tape
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_ocean
$3
![Duct tape](/t/904845.jpg)
Duct tape
...polys. includes: cinema 4d project. model in 3 formats (obj, fbx, 3ds). 6 .tga texture maps (albedo, ambient occlusion, diffus...
turbosquid
$40
![Ventilation Duct PACK](/t/13492160.jpg)
Ventilation Duct PACK
...tion duct pack for download as ma, obj, fbx, and unitypackage on turbosquid: 3d models for games, architecture, videos. (1287068)
Left
3d_export
$7
![human-left-hand](/t/11427538.jpg)
human-left-hand
...human-left-hand
3dexport
human-left-hand
3d_export
$5
![Left arrrow 3D Model](/t/300363.jpg)
Left arrrow 3D Model
...left arrrow 3d model
3dexport
left turn sign signal signage direction
left arrrow 3d model ryisnelly100 88746 3dexport
design_connected
$20
![Nomade Chaise Left](/t/4566686.jpg)
Nomade Chaise Left
... chaise left
designconnected
ligne roset nomade chaise left lounge chairs computer generated 3d model. designed by didier gomez.
design_connected
$16
![Feng Chaise Left](/t/4566683.jpg)
Feng Chaise Left
...ng chaise left
designconnected
ligne roset feng chaise left lounge chairs computer generated 3d model. designed by didier gomez.
3ddd
$1
![Vittorio-Left facing Sofa](/t/612002.jpg)
Vittorio-Left facing Sofa
...vittorio-left facing sofa
3ddd
vittorio , угловой
vittorio-left facing sofa
turbosquid
$33
![Left Turn Sign](/t/13454191.jpg)
Left Turn Sign
...ree 3d model left turn sign for download as 3ds, max, and obj on turbosquid: 3d models for games, architecture, videos. (1303404)
turbosquid
$15
![Left-handed dagger](/t/13506947.jpg)
Left-handed dagger
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
![no left turn - 3ds](/t/13397442.jpg)
no left turn - 3ds
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$7
![Left Arm Armour](/t/13271898.jpg)
Left Arm Armour
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
![Pass Left Signs](/t/13375260.jpg)
Pass Left Signs
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Handed
3d_export
$8
![hand](/t/11931616.jpg)
hand
...hand
3dexport
fantasy hand
3d_export
$5
![hand](/t/11887788.jpg)
hand
...hand
3dexport
male hand
3d_export
$5
![hand](/t/11915734.jpg)
hand
...hand
3dexport
realistic male hand
3d_export
$5
![hand](/t/11493137.jpg)
hand
...hand
3dexport
hand with nails and structure
archibase_planet
free
![Hand](/t/952284.jpg)
Hand
...hand
archibase planet
hand
hand n190111 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3ddd
$1
![Hand](/t/615214.jpg)
Hand
...hand
3ddd
hand
модель руки будды
3d_export
$5
![hand](/t/11922161.jpg)
hand
...hand
3dexport
it is my wrist of hand and this is on 3d sculpt
3d_export
$5
![hand](/t/11915793.jpg)
hand
...hand
3dexport
realistic male hand obj file
3d_export
$7
![hand-006 rigged hand](/t/11461025.jpg)
hand-006 rigged hand
...hand-006 rigged hand
3dexport
rigged right hand 3d model additional textures for pbr rendering included
3d_ocean
$6
![Hand](/t/565241.jpg)
Hand
...
this 3d models of the hands, made in 3ds max, has textures(.jpg), materials(.mat), rigged, the models in .max, fbx, obj format.
Cooling
turbosquid
free
![Cool Inc. Cool Box](/t/13230913.jpg)
Cool Inc. Cool Box
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
![cool penguin](/t/11416826.jpg)
cool penguin
...cool penguin
3dexport
cool penguin
turbosquid
$1
![cooling](/t/13256445.jpg)
cooling
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$26
![cooling tower](/t/11921291.jpg)
cooling tower
...ers.<br>model with full detail in real size. all nodes and bolted connections are built. it was designed for nuclear power.
3ddd
$1
![Mantra Cool](/t/955289.jpg)
Mantra Cool
...14 версиях и obj-файл, а также материал для включенного и для выключенного светильника. turbosmooth/meshsmooth при необходимости.
3d_export
$5
![cool electric guitar](/t/11930325.jpg)
cool electric guitar
...cool electric guitar
3dexport
cool electric guitar
turbosquid
$5
![Cooling glass](/t/13238696.jpg)
Cooling glass
...quid
royalty free 3d model cooling glass for download as obj on turbosquid: 3d models for games, architecture, videos. (1193829)
turbosquid
$30
![CPU Cooling](/t/13393691.jpg)
CPU Cooling
...royalty free 3d model cpu cooling for download as max and fbx on turbosquid: 3d models for games, architecture, videos. (1386263)
turbosquid
$5
![Cool CLoud](/t/13349253.jpg)
Cool CLoud
...
royalty free 3d model cool cloud for download as ma and obj on turbosquid: 3d models for games, architecture, videos. (1572300)
3d_export
$5
![table cooling fan](/t/11890745.jpg)
table cooling fan
...table cooling fan
3dexport
table cooling fan made of black plastic. individual small size cooling fan for office desk.
6
3d_export
$18
![tulip 6](/t/11427092.jpg)
tulip 6
...tulip 6
3dexport
tulip 6
3d_export
$5
![hinge 6](/t/11920338.jpg)
hinge 6
...hinge 6
3dexport
hinge 6
3ddd
$1
![MASIERO / FLASHWOOD STL 6 + 6](/t/604601.jpg)
MASIERO / FLASHWOOD STL 6 + 6
...6
3ddd
masiero
торшер flashwood stl 6 + 6 фабрики masiero
http://www.masierogroup.com/c87_697/it/flashwood%20stl%206%20+%206.ashx
turbosquid
$110
![Atmos Cannon 2000 6*6](/t/13484178.jpg)
Atmos Cannon 2000 6*6
...yalty free 3d model atmos cannon 2000 6*6 for download as skp on turbosquid: 3d models for games, architecture, videos. (1528591)
turbosquid
$1
![ae 6 6 electric locomotive](/t/13479510.jpg)
ae 6 6 electric locomotive
... free 3d model ae 6 6 electric locomotive for download as obj on turbosquid: 3d models for games, architecture, videos. (1707537)
turbosquid
$39
![A-6](/t/13251516.jpg)
A-6
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
![6 ковров](/t/629124.jpg)
6 ковров
...6 ковров
3ddd
ковры , ковер
6 ковров
turbosquid
$12
![Calligraphic Digit 6 Number 6](/t/13397639.jpg)
Calligraphic Digit 6 Number 6
...hic digit 6 number 6 for download as max, obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1389336)
turbosquid
$19
![Case For Phone 6 Girl 6](/t/13461400.jpg)
Case For Phone 6 Girl 6
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$35
![Iphone 6 & 6 Plus All](/t/13507443.jpg)
Iphone 6 & 6 Plus All
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.