Thingiverse
Lee Loadmaster Primer Catcher V2 by lspu
by Thingiverse
Last crawled date: 3 years, 4 months ago
This is a second version Spent Primer Catcher for the Lee Loadmaster progressive reloading press.
Clearing the ram of old primers, jams when it overfills or bending the cover plate on my bench are no longer problems.
Emptying primers is quick and is needed much less often.
** Installing this Primer Catcher required some disassembly and re-setup of the ram (see owner's manual).
What I needed
Ability to disassemble/reassemble the ram and adjust the press (see press owner's manual)
Four small flat head or crown head screws (#4 x 1/2" or M3 x 13mm) = clearance from the arm is very tight. I found a 5mm head size is the largest that would fit. The screw has to be 7mm or longer. See attached image "Screw head - Maximum size.jpg".
Hose -> I used a 10mm ID (3/8") flexible silicone tube. A 1/2" (OD) wire wrap will also work (Harbor Freight 66986).
Something for primers to fall into (empty 500ml water bottle)
Clearing the ram of old primers, jams when it overfills or bending the cover plate on my bench are no longer problems.
Emptying primers is quick and is needed much less often.
** Installing this Primer Catcher required some disassembly and re-setup of the ram (see owner's manual).
What I needed
Ability to disassemble/reassemble the ram and adjust the press (see press owner's manual)
Four small flat head or crown head screws (#4 x 1/2" or M3 x 13mm) = clearance from the arm is very tight. I found a 5mm head size is the largest that would fit. The screw has to be 7mm or longer. See attached image "Screw head - Maximum size.jpg".
Hose -> I used a 10mm ID (3/8") flexible silicone tube. A 1/2" (OD) wire wrap will also work (Harbor Freight 66986).
Something for primers to fall into (empty 500ml water bottle)
Similar models
thingiverse
free
Lee Loadmaster primer feeder LARGE by TheGerman
...70 degrees
rotate it so it rests on the long edge, then the only support needed is for the pin and that can be easily cleaned up.
thingiverse
free
Lee Loadmaster Primerdrop (no mess)
...ier.
you might have to remove the small primer latch/door on the bottom of the ram. it depends on how you have mounted the press.
thingiverse
free
Lee Reloading Press Deprimer Ram Arm by fralic76
...r lee presses). i made this because the press is used as a deprime only press, this will allow the spent primers to exit the ram.
thingiverse
free
Lee Classic Cast Press Primer Deflector by ValleyBot
...de out of position while sizing cases.
when installing make sure bottom wedge is in the groove and it will sit nicely in the ram.
thingiverse
free
Lee Loadmaster Small Primer Feeder Shim by sushix2
...all primer feeder assembly on my loadmaster. this stabilizes the primer feeder and prevents flipping or double feeds of primers.
thingiverse
free
RCBS Rock Chucker Supreme Primer Catcher by ValleyBot
...rked in without sanding.
you will need to supply you own 1/2" or 13mm tubing. the file includes a plug for the tubes bottom.
grabcad
free
Manual Arbor Press
...t; max work height x 2" max work width, ratchet leverage, 20:1 leverage ratio, 2.875" base width x 3.5" base depth
grabcad
free
Lee Loadmaster Turret Holder
...turret tops for the lee loadmaster press.
<br />next will be an accompanying wall bracket to suspend these off your bench.
thingiverse
free
Lee Loadmaster Primer Cam Holder by Rcmaveric
... clearly make out if a primer is installed or damaged. a more expensive borroscope with smaller focal point would help out a lot.
thingiverse
free
RCBS primer deflector by valkokir
...and if it slips out of place and gets in the path of the ram it won't jam up the works. worst case you just need a new straw.
Lspu
thingiverse
free
Swiss hotend Quick Change - Prusa style carriage by lspu
...iss hotend quick change - prusa style carriage by lspu
thingiverse
micro swiss type hotend quick change for prusa style machines
thingiverse
free
Rotary tool blower attachment by lspu
...taching to your drill.
a blower or other air source is attached to the arm. i used 10 mm silicone tubing to route from a blower.
thingiverse
free
Small drill Quick Change - Prusa style carriage by lspu
...for prusa style machines.
note:
i used acetone to attach the quick change bracket and cradle together. this may not be required.
thingiverse
free
Diamond Head Quick Change - Prusa style carriage by lspu
...a style machines.
included files allow for attaching fan guards, a light, two styles of blowers and a laser to the diamond hotend
thingiverse
free
Defender Xtreme scales (9062, 9245, 9252 style) by lspu
...t defender xtreme folding, spring assist knives like the 9062, 9245, 9252 styles.
no supports are required. i used abs filament.
thingiverse
free
Rotary Tool Quick Change - Prusa style carriage by lspu
...d at:
https://www.thingiverse.com/thing:4714121
note:
i used acetone to attach the bracket and cradle. this may not be required.
thingiverse
free
33mm Laser Quick Change - Prusa style carriage by lspu
...ith a couple 3mm screws in a few minutes.
i use this bracket with my air assist nozzle:
https://www.thingiverse.com/thing:4014951
thingiverse
free
Simple Parabolic Microphone by lspu
...lso included to print the whole thing with supports.
configured as shown, this microphone is 90mm from center/bottom of the bowl.
3dwarehouse
free
gate of lspu
...gate of lspu
3dwarehouse
sir daran pogi's sample 3d 10
Loadmaster
unity_asset_store
$10
Loadmaster Mixer
...low with the loadmaster mixer asset from wicked cat interactive. find this & other land options on the unity asset store.
unity_asset_store
$10
Loadmaster Cargo
...low with loadmaster cargo asset from wicked cat interactive. find this & other great 3d options on the unity asset store.
thingiverse
free
Loadmaster shell slider by alexhalbi
...loadmaster shell slider by alexhalbi
thingiverse
357 magnum shell slider for lee loadmaster and pro1000
unity_asset_store
$10
Loadmaster Fuel Tank
...with the loadmaster fuel tank asset from wicked cat interactive. find this & other land options on the unity asset store.
thingiverse
free
Loadmaster shell slider 9mm and 380Auto by alexhalbi
...loadmaster shell slider 9mm and 380auto by alexhalbi
thingiverse
9mm and 380auto shell slider for lee loadmaster and pro1000
thingiverse
free
Lee Loadmaster Small Primer Feeder Shim by sushix2
...all primer feeder assembly on my loadmaster. this stabilizes the primer feeder and prevents flipping or double feeds of primers.
thingiverse
free
Lee Loadmaster Primer Cam Holder by Rcmaveric
... clearly make out if a primer is installed or damaged. a more expensive borroscope with smaller focal point would help out a lot.
thingiverse
free
Lee Loadmaster primer feeder LARGE by TheGerman
...70 degrees
rotate it so it rests on the long edge, then the only support needed is for the pin and that can be easily cleaned up.
thingiverse
free
Lee Loadmaster Rifle Case support mod
...admaster rifle case support mod
thingiverse
i remixed this to lower the arm to accommodate the upper lock nut on the case feeder
thingiverse
free
Lee LoadMaster customized slider and joint by Andrewrok
...erse
print the sliders with the support...40% infill
https://www.youtube.com/channel/uc5dykujlufgywewhxiau_pg?view_as=subscriber
Catcher
3d_export
$15
baseball glove catcher catchers mitt
...baseball glove catcher catchers mitt
3dexport
baseball glove catcher catcher's mitt
3d_export
$5
dream catcher
...dream catcher
3dexport
low poly dream catcher
turbosquid
$65
Toy Catcher
...y free 3d model toy catcher for download as c4d, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1707625)
3d_export
$10
Medieval catcher 3D Model
...de catcher medieval middle ages wood military fence palissade war enemy castle
medieval catcher 3d model redbird3d 92006 3dexport
turbosquid
$31
Rainbow Catcher Flower.lwo
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
cg_studio
$59
White Baseball Catcher 9054 tris3d model
...odel
cgstudio
.fbx - white baseball catcher 9054 tris 3d model, royalty free license available, instant download after purchase.
3d_export
$59
HiPoly Cricket Player Catcher 3D Model
... glove gloves bat ball protection seams india british australia
hipoly cricket player catcher 3d model codethislab 71543 3dexport
3d_export
$59
White Baseball Player Hipoly CATCHER 3D Model
...ntertainment hat helmet sport character man glove gloves
white baseball player hipoly catcher 3d model codethislab 79469 3dexport
3d_export
$59
White Baseball Catcher 9054 tris 3D Model
...aseball bat ball entertainment hat sport character man glove
white baseball catcher 9054 tris 3d model codethislab 95120 3dexport
3d_export
$8
Snack Catcher 01
...& .obj. please rate, when you buy. thanks! :) also, please check out my other useful portfolio items that you may be missing!
Primer
turbosquid
$23
hand primer pump diesel
...lty free 3d model hand primer pump diesel for download as iam on turbosquid: 3d models for games, architecture, videos. (1258716)
3d_export
$19
Guerlain Kisskiss Liplift lipstick primer
... x 1,16" x 5,619"<br>- model parts: 6<br>- material count: 2<br>- xform: yes<br>- boxtrick: yes
3d_export
free
Ibm
...ibm 3dexport un modelo 3d de caricatura de primer pc de la...
3d_export
$10
Ammunition 303 3D Model
...model 3dexport ammunition ammo cartridge bullet 303 british propellent primer round military army rifle projectiles inch calibre machine gun...
3d_export
$15
50 Cal Bullet 3D Model
...3 different peices, the case, the cone and the primer the scene and materials(vray) needed to render the preview...
3d_ocean
$12
Gauge Shell with Ammunition Components
...shell high poly high resolution high-poly hull shell case primer shots slug wad 3d model of realistic high-poly gauge...
3d_ocean
$16
Bullets
...fight firearm gun investigation metal model penetration pistol powder primer reflection rifle robbery sling target war bullets are made...
3d_export
$22
5.56x45 NATO Cartridge 3D Model
...mesh is composed of a separate bullet, casing and primer in addition,this mesh utilizes vray procedural materials. please note...
3d_export
$22
Cartridge 9x18 mm PM-9 PPT gzh1
...a pierced primer (fired) and non-collapsible with a whole primer 3d model is low poly and game-ready.<br>real scale -...
3d_export
$22
Cartridge 9x18 mm - PMM
...a pierced primer (fired) and non-collapsible with a whole primer 3d model is low poly and game-ready.<br>real scale -...
Lee
3ddd
free
Lam Lee
...e , банкетка , трюмо
набор мебели фирмы lam lee
turbosquid
free
Lee
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
LEE BROOM
...lee broom
3ddd
lee broom
http://www.leebroom.com/
3ddd
$1
Lee Broom / Salon
...lee broom / salon
3ddd
lee broom
lee broom / salon
3d_export
$8
stan lee
...stan lee
3dexport
3ddd
$1
LEE BROOM hoop chair
...lee broom hoop chair
3ddd
lee broom
lee broom hoop chair
turbosquid
$20
Lee short
...
royalty free 3d model lee short for download as max and max on turbosquid: 3d models for games, architecture, videos. (1540770)
turbosquid
free
Stan Lee
...free 3d model stan lee for download as max, obj, fbx, and stl on turbosquid: 3d models for games, architecture, videos. (1348558)
3ddd
$1
Lee Broom Salon Drum
...drum
3ddd
lee broom , пуф
this is the lee broom ottoman in different size and materials.
turbosquid
$10
Bruce Lee
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
V2
3d_export
free
Lamp v2
...lamp v2
3dexport
lamp v2 with solar panel
3d_export
$5
hammerhead v2
...hammerhead v2
3dexport
razer hammerhead v2 headphones, modeled in cinema 4d, render in corona
3d_export
$5
manometer v2
...manometer v2
3dexport
3d_export
$5
potato v2
...potato v2
3dexport
turbosquid
$52
Lifebuoys v2
...squid
royalty free 3d model lifebuoys v2 for download as fbx on turbosquid: 3d models for games, architecture, videos. (1560870)
turbosquid
$2
Mask v2
...turbosquid
royalty free 3d model mask v2 for download as stl on turbosquid: 3d models for games, architecture, videos. (1527741)
turbosquid
free
Flashlight V2
...d
free 3d model flashlight v2 for download as , obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1663559)
turbosquid
$29
Thanos v2
...
royalty free 3d model thanos v2 for download as ztl and obj on turbosquid: 3d models for games, architecture, videos. (1651077)
turbosquid
$29
Titan v2
...d
royalty free 3d model titan v2 for download as ztl and obj on turbosquid: 3d models for games, architecture, videos. (1540228)
turbosquid
$29
Frieza v2
...
royalty free 3d model frieza v2 for download as ztl and obj on turbosquid: 3d models for games, architecture, videos. (1701238)