Thingiverse
Lee Load All 2, replacement of a spring for a gas lift by DDA50
by Thingiverse
Last crawled date: 4 years, 7 months ago
Concept by MrGunskaa (https://youtu.be/XZyXY9n1gi0)
It's just that in the video he did not give links to the 3D model, or at least the dimensions. Therefore, I concocted mine, empirically. 2 plugs for installing M6 nuts, into which the screws are screwed on the ends of the rod and the body of the furniture gas lift. I took a 6N gas lift (6 kg). A small cube 18.5x18.5 mm is installed down into the machine rack, the upper one, respectively, into the hopper.
It's just that in the video he did not give links to the 3D model, or at least the dimensions. Therefore, I concocted mine, empirically. 2 plugs for installing M6 nuts, into which the screws are screwed on the ends of the rod and the body of the furniture gas lift. I took a 6N gas lift (6 kg). A small cube 18.5x18.5 mm is installed down into the machine rack, the upper one, respectively, into the hopper.