Thingiverse
LED Cube CPU monitor by DiCon
by Thingiverse
Last crawled date: 3 years, 4 months ago
This is the LED cube presented on https://there.oughta.be/an/led-cube. It is a 3d printed frame with 64x64 RGB LED video panels on three sides and a Raspberry Pi 2 on the inside. An accompanying Python script monitors the CPU on another PC and sends its status data to the cube. The animation on the cube then reflects CPU usage and temperature on the other PC.
The cube shown on there.oughta.be consists of three sides that hold a panel each (sides.stl), two sides holding the Raspberry Pi 2 (sides_pi_bottom.stl and sides_pi_side.stl) and one plain solid side (sides_filled.stl). You might also use different combinations. The base is optional if you prefer to present the cube at an angle (I did not use it in the end).
Print in PLA with 0.1mm layer height (although 0.2mm should work fine, too). The orientation of the objects in the STL files is the suggested orientation for printing. The "frame" sides for the LED panels should be printed with supports to get the small inset for the panel right. The other models can usually be printed without supports (I used Cura and an Anycubic Mega S).
I have also included the blend files (Blender) if you want to change the design.
See http://there.oughta.be/an/led-cube or the video at https://youtu.be/QqknzoxHMFo for more details on the electronics and the software. Note, that this project requires some experience in compiling code and setting up the Linux system on the Pi as well as probably adapting the accompanying Python script. I provide source, print files and an overview, but not a step-by-step guide.
Questions and discussions on https://www.reddit.com/r/thereoughtabe/. Of course, anything regarding the 3d printing can be done here as well...
The cube shown on there.oughta.be consists of three sides that hold a panel each (sides.stl), two sides holding the Raspberry Pi 2 (sides_pi_bottom.stl and sides_pi_side.stl) and one plain solid side (sides_filled.stl). You might also use different combinations. The base is optional if you prefer to present the cube at an angle (I did not use it in the end).
Print in PLA with 0.1mm layer height (although 0.2mm should work fine, too). The orientation of the objects in the STL files is the suggested orientation for printing. The "frame" sides for the LED panels should be printed with supports to get the small inset for the panel right. The other models can usually be printed without supports (I used Cura and an Anycubic Mega S).
I have also included the blend files (Blender) if you want to change the design.
See http://there.oughta.be/an/led-cube or the video at https://youtu.be/QqknzoxHMFo for more details on the electronics and the software. Note, that this project requires some experience in compiling code and setting up the Linux system on the Pi as well as probably adapting the accompanying Python script. I provide source, print files and an overview, but not a step-by-step guide.
Questions and discussions on https://www.reddit.com/r/thereoughtabe/. Of course, anything regarding the 3d printing can be done here as well...
Similar models
thingiverse
free
Switch Panel - Power, LEDs, Raspberry Pi by whatmojm
... update when complete). i wanted to print this with the boarder and icons facing up so that i could make them a different color.
thingiverse
free
16x32 LED Matrix Case with Raspberry Pi Mount by mdegrazia
...aspberry pi case i used is based off the carcasa para raspberry pi - raspberry pi case, https://www.thingiverse.com/thing:1984351
thingiverse
free
7inch Display Frame by tom2rd
...ded stl and step files, so remodel as you like.
details are described below,https://tom2rd.sakura.ne.jp/wp/2021/06/07/post-12171/
thingiverse
free
Raspberry Pi 4 PC Case & Monitor by Fonseca1015
...raspberry pi 4 pc case & monitor by fonseca1015
thingiverse
raspberry pi 4 pc case & monitor
thingiverse
free
Raspberry Pi 4 Desktop Case With OLED Stats Display by thediylife
...-life.com/diy-raspberry-pi-4-desktop-case-with-oled-stats-display/
here's a video of the build - https://youtu.be/9sb_zuhgmy4
thingiverse
free
PS5 case for Raspberry Pi 4B by maximilian2807
...om/item/4001128778567.html?spm=a2g0s.9042311.0.0.5b2a4c4dt6ygzu
i'll upload the pictures as soon as everything is finished :d
thingiverse
free
Raspberry Pi Mount (side or top) by Lesismore89
...our raspberry pi. (good for accessing gpios easier)
original design: https://www.youmagine.com/designs/raspberry-pi-side-mount.
thingiverse
free
Cube with frames for holding removable panels by catuna
... panel size.
note: there is a bug with openscad that makes preview mode not render properly, use render to view the proper cube.
thingiverse
free
Wanhao i3 Clip on Raspberry Pi Octoprint Case by suzujoji
...ble clip to mount it to the frame, or a zip tie. i included stl files as well as step files so you can modify it for your needs.
thingiverse
free
Miniature PC by jq910
...soon but that will probably take a while. (sneak peek: ibb.co/yt6gk6v )
f3d and step files are included if you want to modify it.
Dicon
thingiverse
free
Wooden track to cardboard tube adapter by DiCon
...perators to define the cut-out to hold the tube.
i have printed it in pla with 0.2mm layers and 25% infill. no supports required.
thingiverse
free
Dynamically Assignable Macro Keyboard with e-ink Display by DiCon
...structions and the code at https://there.oughta.be/a/macro-keyboard and you can see it in action at https://youtu.be/nndeaxd5fdm.
Cpu
thingiverse
free
Cpu Holder by IronRobotCat
...et 7 socket 370 and socket 478 cpu
whitch can protect cpu pins
but this box may be a little tight for socket 370 coppermine cpu。
thingiverse
free
CPU holder by McRane
...
thingiverse
hi, i needed to keep my cpu in safety place so created this model.
this holder match an intel 35x35mm notebook cpu.
thingiverse
free
Base Stand for Cpu
...desktop cpu
design is a basic stand for cpu
it stands at certain height to allow cool air flow from buttom..
it is stable design.
thingiverse
free
LGA 775 CPU Model - CPU Socket Cover
...rboard. not exact dimensions but precise enough to fit inside the socket.
looking for a 775 cpu case? check out my other design!
thingiverse
free
CPU by PadawanOz
...39;s a cpu i made vaguely based on a i7, although its performance isnt the best. and its scaled way to small. so scale it bigger.
thingiverse
free
CPU Waterblock holder (watercooled CPU) by markohoepken
...sure on the cpu.
the entire thing from thinking to have it in the pc: ~3 hours (including prining).
enjoy makeing your own.
marko
thingiverse
free
Intel CPU stand (775)
...u stand for size processors 38x38mm.
in my case it's mounted a 775 cpu.
i don't know if the stand is good for other cpus.
thingiverse
free
Intel CPU holder with clips by ironmanning36
...intel cpu holder with clips by ironmanning36
thingiverse
this is a cpu holder that does not allow the cpu to fall out.
thingiverse
free
AMD CPU BRACKET by Mjacobs518
...acket by mjacobs518
thingiverse
amd cpu bracket, this was created because i have a cpu fan i wanted to use with my am3 slot mobo
thingiverse
free
CPU/RAM stand by _Flaggon
...cpu/ram stand by _flaggon
thingiverse
simple stand for cpu's and ram sticks
Monitor
thingiverse
free
Monitor Riser
...monitor riser
thingiverse
monitor riser for a 6.5 inch x 8 inch rectangle base monitor.
thingiverse
free
monitor spacer
...monitor spacer
thingiverse
spacer for monitor rod
thingiverse
free
Monitor Tray
...monitor tray
thingiverse
just a simple monitor tray.
thingiverse
free
HelloBaby monitor
...hellobaby monitor
thingiverse
antenna cover for hellobaby baby monitor model: hb24rx
thingiverse
free
Soporte monitor | Monitor Stand by Jarodrisal
...taje es necesario tornillos y tuercas m4.
support for monitor with a height of 10cm. m4 screws and nuts are required for assembly
thingiverse
free
Monitor Union by darkraven1431
...join and hold 2 wall mounted monitors.
monitor: lg 23mp55
the monitors were mounted with the following support monitor wall mount
thingiverse
free
7" LCD Monitor Mount (for monitor) by max1600
...ngiverse
mount for mounting a 7-inch monitor on a regular monitor.
after printing, you need to glue lcd quick rail to lcd mount.
thingiverse
free
Monitor shelf for Samsung monitor U24E590DS by frejer
... samsung monitor u24e590ds by frejer
thingiverse
a perfect fit for samsung monitor u24e590ds, can be used as a mic stand or w/e
thingiverse
free
Monitor stand by LarsBonde
...sbonde
thingiverse
this monitor stand raises the monitor about 7.5 cm and tilts it 12 dgr.
it is fitted to my hp s2231a monitor.
thingiverse
free
Monitor bin(Customizable)
...monitor bin(customizable)
thingiverse
monitor bin for sceptre e275w-19203r ultra thin monitor(customizable)
Cube
thingiverse
free
Cube in a Cube in a Cube by clif
...cube in a cube in a cube by clif
thingiverse
a cube inside of a cube, inside of a cube
thingiverse
free
Cube in a cube in a cube by OzJohnson
... this is a solid cube loosely imprisoned inside a cut-away cube which in turn is loosely imprisoned inside another cut-away cube.
thingiverse
free
Cube in a Cube in a Cube in a Cube
...d/impossible to manufacture with traditional methods. this cubes is an example of what i had in mind when buying my first printer
thingiverse
free
Cube of Cubes on a Cube by Gannan
...cube of cubes on a cube by gannan
thingiverse
playing around with my cad software.
thingiverse
free
Cube in a cube by HappySubMarine
...in a cube makes impresion for a lot of people.
cube from the cube will never fall out.
when you print remember about the suports.
thingiverse
free
Cube in a cube by OzJohnson
...cube in a cube by ozjohnson
thingiverse
this is a solid cube loosely imprisoned inside a cut-away cube.
thingiverse
free
Cube in a cube in a cube in a cube by Max_Skies
... print does requare support material. it may be difficult to chip out unless you use a dissolving support material (which i did).
thingiverse
free
Nesting Cubes, Recursive Cubes, Cubes within Cubes
...tp://mathworld.wolfram.com/cubicnumber.html
https://en.wikipedia.org/wiki/recursion
https://en.wikipedia.org/wiki/matryoshka_doll
thingiverse
free
cube in cube on pyramid by Syzguru11
...cube in cube on pyramid by syzguru11
thingiverse
cube in cube on pyramid
thingiverse
free
cube cube 6x6x6 by Syzguru11
...cube cube 6x6x6 by syzguru11
thingiverse
cube cube 6x6x6
Led
thingiverse
free
Estuche LED / LED Box by fxbob
...stuche led / led box by fxbob
thingiverse
estuche para anillo de compromiso con luz led
box for packaging jewelry with led light
thingiverse
free
10X10 LED Matrix for 6mm leds by MattCudaj
...10x10 led matrix for 6mm leds by mattcudaj
thingiverse
10x10 led matrix for 6mm leds
thingiverse
free
LED spot with power LED and heatsink. by Geogeorge
...led spot with power led and heatsink. by geogeorge
thingiverse
led spot with power led and heatsink.
thingiverse
free
LAMPADA LED
...lampada led
thingiverse
lampada a led
thingiverse
free
WS2812 Rings with 16 LEDs or 4 LED
...ors ws2812 rings (16 led) and segements (4 led). the outer diameter of the led pcb is 60mm. best printed with transparent white.
thingiverse
free
Led holder
...led holder
thingiverse
holder for led lights.
thingiverse
free
LED by guillaumedeboosere
...led by guillaumedeboosere
thingiverse
led in green, orange and red
thingiverse
free
16x16 LED MATRIX for 10mm LEDs by RBEPrinter
...16 led matrix for 10mm leds by rbeprinter
thingiverse
this is a game frame inspired led matrix plane for 16x16 10mm ws2813 leds.
thingiverse
free
4x4 led cube led holder by braden040
...4x4 led cube led holder by braden040
thingiverse
this is a 4x4 led cube led holder that i designed
hope you like it thanks
thingiverse
free
A Jig for LED strip soldering, For Lightsaber LED Strip type-5X5mm LEDs by watchmaker_lam
... led strip type-5x5mm leds by watchmaker_lam
thingiverse
a jig for led strip soldering, for lightsaber led strip type-5x5mm leds