Thingiverse
LCD Mounting Brackets for 20mm extrusions & Wersy's XXL case by Otacsum
by Thingiverse
Last crawled date: 4 years, 3 months ago
These brackets mount your LCD controller to 20mm square T-slot or V-slot rails. They are designed to work directly with Wersy's case for the Reprapdiscount Smart LCD Controller XXL. (Be sure to print Wersy's bottom case with the nut traps - Bottom_Case_XXL_Pockets.stl)
The brackets mount to the LCD case using the nut traps on 37mm centers. They can be mounted in either the horizontal or vertical position on your 20mm extrusions to provide either a top or a front mounted LCD. You can mount these brackets to your extrusions using only two screws, but I recommend four for optimal strength.
Hardware required:
4x M3 x 10mm screws
4x M3 nuts
4x M5 x 10mm screws
4x M5 T-nuts or V-slot nuts.
The brackets mount to the LCD case using the nut traps on 37mm centers. They can be mounted in either the horizontal or vertical position on your 20mm extrusions to provide either a top or a front mounted LCD. You can mount these brackets to your extrusions using only two screws, but I recommend four for optimal strength.
Hardware required:
4x M3 x 10mm screws
4x M3 nuts
4x M5 x 10mm screws
4x M5 T-nuts or V-slot nuts.