Thingiverse
Laundry Rack Riser by ntdesign
by Thingiverse
Last crawled date: 5 years, 3 months ago
Easy-to print riser feet for standard laundry rack (about 16mm diameter tube).
rises the rack enough to trigger robovac collision sensors (tested with Roborock S5)
still allows folding
better floor protection
no more lost clips or clips facing in the wrong direction
glueless & screwless assembly with cable ties
easy print for flex / semiflex (PLA is fine for pins), no supports
slightly parametric (tube diameter and spool diameter)
provided stl work perfectly for the standard rack model
I made mine from Fillamentum Flexfill 98A. The pins are only needed for centering, probably some cardboard slips will do just as well.
rises the rack enough to trigger robovac collision sensors (tested with Roborock S5)
still allows folding
better floor protection
no more lost clips or clips facing in the wrong direction
glueless & screwless assembly with cable ties
easy print for flex / semiflex (PLA is fine for pins), no supports
slightly parametric (tube diameter and spool diameter)
provided stl work perfectly for the standard rack model
I made mine from Fillamentum Flexfill 98A. The pins are only needed for centering, probably some cardboard slips will do just as well.