Thingiverse
Lattepanda Case for LCD Touchscreen (for newer LCD Version) by MetalHeadz
by Thingiverse
Last crawled date: 4 years, 2 months ago
I modified the original great design to supports newer LCD from DFRobot, because they are different in size!
Printed at 0.2mm, 10% infill
I prefer using computer board nuts to mount the panda, easier to remove and it gives place for the fan underneath the board. With 6 heatsink copper and a the official fan, the thing never go over 55C even on heavy load!
Keep in mind that the pins will eventually break when you remove the screen plate from the body, so make sure everything is ok when you close it
Here's the remixed case I made too : https://www.thingiverse.com/thing:2310913
Printed at 0.2mm, 10% infill
I prefer using computer board nuts to mount the panda, easier to remove and it gives place for the fan underneath the board. With 6 heatsink copper and a the official fan, the thing never go over 55C even on heavy load!
Keep in mind that the pins will eventually break when you remove the screen plate from the body, so make sure everything is ok when you close it
Here's the remixed case I made too : https://www.thingiverse.com/thing:2310913