Thingiverse
Lathe Cutter Centering Tool With Magnets by AlbyBat
by Thingiverse
Last crawled date: 4 years, 4 months ago
Original Thing: https://www.thingiverse.com/thing:1010033
Thanks to original Designer.
I completely redesigned the piece, using Fusion 360 and starting from the original, I added at the back a 120 degree V with 4 neodymium magnets 8 mm diameter, 3 mm thick.
The lateral window fits a Dowel pin 10mm diameter 30mm long, and I made a passage to insert an M4 nut, as a cotnut for fixing the screw.
One bearing Outer diameter 22, Inner diameter 10mm, thickness 6 to 9mm (608z)
One Spirit Level, 9mm diameter,40mmLength
One Dowell Pin, 10mm diameter, 30mmLength
One 15mm long M4 Allen screw
Two M4 nuts
Four Neodymium magnets 8MM diameter 3MM thick.
You can edit The Fusion 360 file .F3d and insert your Name and Surname, or whatever you want.
Thanks to original Designer.
I completely redesigned the piece, using Fusion 360 and starting from the original, I added at the back a 120 degree V with 4 neodymium magnets 8 mm diameter, 3 mm thick.
The lateral window fits a Dowel pin 10mm diameter 30mm long, and I made a passage to insert an M4 nut, as a cotnut for fixing the screw.
One bearing Outer diameter 22, Inner diameter 10mm, thickness 6 to 9mm (608z)
One Spirit Level, 9mm diameter,40mmLength
One Dowell Pin, 10mm diameter, 30mmLength
One 15mm long M4 Allen screw
Two M4 nuts
Four Neodymium magnets 8MM diameter 3MM thick.
You can edit The Fusion 360 file .F3d and insert your Name and Surname, or whatever you want.