Thingiverse
Lateral Flow Test (from gov.uk) organiser by merecomp
by Thingiverse
Last crawled date: 4 years ago
Lateral flow test kits from UK Gov which contain 7 tests and are tightly packed to fit through letterboxes and it's a pain to get things back in. This organises the bits and pieces, which I then keep in a bathroom cabinet.
Looking from the front:
Top left is for test strips
Top middle for extraction buffer sachets
Top right for swabs
Middle right for the waste bags
Just to the right of the waste bags is a holder to keep an extraction tube upright while in use
Bottom is for the extraction tubes
The different sections are munged together, with double-thickness (2 x 2mm) walls where they meet; if I were to redesign I would not double them up. An Autodesk Fusion 360 file is included to make modifications easier.
I could have fitted this into a slightly smaller footprint but I made it to fit into a specific space. I printed on an FLSun Q5 and had to reduce the brim to 4mm to fit.
I finish an entire set of tests before refilling, to avoid mixing lot numbers.
Looking from the front:
Top left is for test strips
Top middle for extraction buffer sachets
Top right for swabs
Middle right for the waste bags
Just to the right of the waste bags is a holder to keep an extraction tube upright while in use
Bottom is for the extraction tubes
The different sections are munged together, with double-thickness (2 x 2mm) walls where they meet; if I were to redesign I would not double them up. An Autodesk Fusion 360 file is included to make modifications easier.
I could have fitted this into a slightly smaller footprint but I made it to fit into a specific space. I printed on an FLSun Q5 and had to reduce the brim to 4mm to fit.
I finish an entire set of tests before refilling, to avoid mixing lot numbers.