Thingiverse
Laser Mounting by fgebhart
by Thingiverse
Last crawled date: 3 years, 1 month ago
Mounting for Laser:
Place five laser in a fixed position.
Distance between lasers = 30mm
Diameter of laser holes = 8mm
Diameter of screws (to fasten the lasers) holes = 4mm
Diameter of screws (to fasten mounting on base plate = 5mm
Place five laser in a fixed position.
Distance between lasers = 30mm
Diameter of laser holes = 8mm
Diameter of screws (to fasten the lasers) holes = 4mm
Diameter of screws (to fasten mounting on base plate = 5mm
Similar models
thingiverse
free
Laser-Diode-Holder (12mm diameter) by Juli971Master
...r of 1.2 and smaller.
diode can be locked with a screw through a hole on top of the holder.
4 additional screwholes for mounting.
thingiverse
free
NEJE Laser Mount by buckeyes1997
...ap neje 7w laser. the mount has 4 holes for the m3 screws to the laser body and 3 holes for mounting on a frame or machine base.
thingiverse
free
Swivel mount laser on the rod by Trigubovich
...ser on the rod by trigubovich
thingiverse
is used for:
12mm diameter of the laser module
6mm rod diameter
2 m3x20 screw
1 washer
thingiverse
free
Laser projector Mirror mount by Jasonbriggs
...table mirror mount for a laser scanner. you need to tap one of the upper holes and one of the lower holes for the adjusting screw
thingiverse
free
Shelf mounting
...shelf mounting
thingiverse
fastening the shelf in the bathroom cabinet
hole diameter 5 mm
thingiverse
free
Laser mount for curtain pole by qCallMeDaddyp
...tain pole by qcallmedaddyp
thingiverse
curtain pole laser mount 29mm inner diameter.
designed for m3.5/m4 screw up to 12mm long.
thingiverse
free
Parallax Laser Ping Mount by vatbrain
...ing machine screw hole sized for m2.5 tap.
base mounting holes sized for #6-32 machine screw, spaced 1.75" center to center.
thingiverse
free
Aurora A3 Laser Mount by dmhoyt
...screws for the part cooler fan and keyholes to allow easy installation/removal (just loosen screws ... no need for full removal).
thingiverse
free
Telescope Laser Mount by mweis
... rings to the base part and i wanted to use m4x20 throughout.
the screw hole diameters are dimensioned for manual thread cutting.
thingiverse
free
![[Parametric]Soft Mount brushless Motor by Billyben](/t/8679060.jpg)
[Parametric]Soft Mount brushless Motor by Billyben
...ameter
thickness for screw holes
inner diameter for clip axis.
thickness of the piece.
provided with 110x _ 1mm thick soft mount.
Fgebhart
thingiverse
free
Stepper Cube by fgebhart
... the spacing in the bottom is 3x5mm with is the same like the axis of the stepper. easy printable.
size of the cube is 20x20x15mm
thingiverse
free
Stepper Motor Mounting by fgebhart
...stepper motor mounting:
place five stepper motors (type: 28byj-48) next to each other. holes to attach the steppers are provided.
thingiverse
free
Atmosphere Glas on Rail by fgebhart
...
attach glas on rail and plug into rail mounting. movement now refracts the laser beams and simulates the atmospheric turbulence.
thingiverse
free
Raspberry Pi Cam Hold by fgebhart
...berry pi cam hold:
manage to attach your raspberry pi cam to any surface. easy to hide it underneath any surface. easy printable.
thingiverse
free
Desk Lamp Connection by fgebhart
...amp and folding-frame breaks, you might just print this. it replaces the weakest link and can be strengthened by addind a screw.
thingiverse
free
Bike Air Pump Handle by fgebhart
...needs on onshape:https://cad.onshape.com/documents/f01174ff267bf4376b866cb6/w/bd822fd8156a312477282f18/e/b0e71873e7ff57723240798d
thingiverse
free
Lense 250 with Mounting by fgebhart
...t to a sharp point. (in contrast to "lense 160 with mounting"). the physical dimensions have been designed using zemax,
thingiverse
free
Touchscreen Frame for Raspberry Pi 7inch Display by fgebhart
...he inner dimension of the frame is 155 x 86 mm. it is built to set the screen into some spacing in something like a wooden table.
thingiverse
free
6 Piece Cross Puzzle Burr by fgebhart
...igning and printing this is soo simple.
warning: the riddle is really hard. mostly all people need at least one hour to solve it!
Laser
3d_export
$5
laser
...laser
3dexport
a 3d laser
3d_export
free
cnc 3dp laser nozzle for 2w laser opt lasers
...logy that gave birth to cutting and engraving laser heads this laser nozzle was designed for, read the article in the link below:
3d_export
free
cnc laser mount opt lasers
...eive the engraving and cutting laser heads this cnc machine laser mount was designed for, read the article on the following page:
turbosquid
$20
Laser
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
Laser
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$3
Laser
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
laser sword
...laser sword
3dexport
it is a blue laser sword with a metal frame
3d_ocean
$19
Laser Turret
...be used in any sf type of game, especially in tower defense games. - laser turret: 3025 polygons - props: 270 polygons - textu...
3d_export
free
workbee cnc laser mount for opt lasers
...the specifications of engraving and cutting laser heads this mount was designed for, please take a look at the following website:
3d_export
free
shapeoko cnc laser mount for opt lasers
...ind out the opportunities that adding a cutting and engraving laser head to your cnc can bring, take a look at the website below:
Mounting
3d_export
free
mounting bracket
...mounting plate is the portion of a hinge that attaches to the wood. mounting plates can be used indoors, cabinetry and furniture.
turbosquid
$2
MOUNTING
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Mounts
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Mount Fuji
...fuji
turbosquid
free 3d model mount fuji for download as obj on turbosquid: 3d models for games, architecture, videos. (1579977)
3d_export
$5
Headphone mount LR
...headphone mount lr
3dexport
headphone mount l+r
turbosquid
$39
Mount rainier
...quid
royalty free 3d model mount rainier for download as fbx on turbosquid: 3d models for games, architecture, videos. (1492586)
turbosquid
$5
pipe mounting
...quid
royalty free 3d model pipe mounting for download as obj on turbosquid: 3d models for games, architecture, videos. (1293744)
turbosquid
$3
Mounting Tires
...uid
royalty free 3d model mounting tires for download as fbx on turbosquid: 3d models for games, architecture, videos. (1708511)
3d_export
$5
Magnetic GoPro Mount
...pro mount
3dexport
cool magnetic mount for gopro. allows you to mount the camera on flat metal surfaces and get exclusive shots.
turbosquid
$5
Stone Mount
...ty free 3d model stone mount for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1370306)