Thingiverse
Laser Engraver Cutter Grid reuse a Ikea Rivet
by Thingiverse
Last crawled date: 5 years, 10 months ago
I was looking for a cheap solution to have a grid for my laser engraver, I do a reuse of an ikea trivet :
2x Lamplig : https://www.ikea.com/fr/fr/p/laemplig-grille-dessous-de-plat-acier-inoxydable-30111087/
and then add 8x Caps on it and mount it on the 2020 profile slot.
It works fine, just need some effort to engage or disengage the 4 of each rivet.
I'll try to avoid to engrave the printed parts :)
2x Lamplig : https://www.ikea.com/fr/fr/p/laemplig-grille-dessous-de-plat-acier-inoxydable-30111087/
and then add 8x Caps on it and mount it on the 2020 profile slot.
It works fine, just need some effort to engage or disengage the 4 of each rivet.
I'll try to avoid to engrave the printed parts :)