Thingiverse
Lapping paste syringe holders by Phistterbut_Inc
by Thingiverse
Last crawled date: 4 years, 12 months ago
Just a quick set of holders for some lapping paste or other 15 mm wide syringes. I recommend printing them in the orientation provided rather than on their backs. I did two together, one in each and the one printed solid in standard orientation turned out much better, but warped a little bit.
These shown are printed with PETG and an 0.8 mm nozzle. Had an issue with the Z-min end stop, so the first layer wasn't very quality.
There are two versions. One with a wide base and holes for screws. I'll probably drill them to size when I go to mount them.
I'll update with more photos when I do. Maybe they'll be in focus... probably not.
These shown are printed with PETG and an 0.8 mm nozzle. Had an issue with the Z-min end stop, so the first layer wasn't very quality.
There are two versions. One with a wide base and holes for screws. I'll probably drill them to size when I go to mount them.
I'll update with more photos when I do. Maybe they'll be in focus... probably not.