Thingiverse
Langstroth Hive Frame
by Thingiverse
Last crawled date: 4 years, 4 months ago
Langstroth Frame Kit
Intro
Unless you have a massive 3D printer that can print 483 mm pieces, you're going to have to print this in several parts. I have provided both the original parts (preferred) and pre-cut parts which are split so they can be printed on a 250 mm printer. This means that some parts must stand up vertically if you use something like an Ender 3.
Do not scale this project unless building custom hive bodies.
While the frames could be assembled with 3D printed parts, also consider that these STLs could be used to generate templates for your own woodworking. Given the size of the top and bottom bars, and the relatively simple construction of these pieces, a mix-and-match of wooden tops and bottoms with 3D printed sides to create shallow (short), medium, and deep frames would be an excellent project.
A Note on Materials
PLA is generally considered food safe but you probably wouldn't seriously consider eating off your 3D printer bed or drinking out of the nozzle. Additionally the PLA manufacturers are not considering if things are "food safe" when choosing what to add to their PLA for color or effect. ABS, PETG, whatever else? Who knows. You must be responsible for your own safety, and the safety of the bees. Please don't just guess if a material is safe or not.
Additionally if you choose to glue (rather than mechanically fix) the joints of the frame, the glue must be food safe or encapsulated. Remember that there's precious, living organisms who are going to call this thing home. You're probably going to eat some of their honey. If you wouldn't want superglue in your honey, you need to encapsulate that somehow.
You can get food safe paint for crafting at your local craft store, which is designed for painting plates and similar. Read the instructions carefully, you cannot use a paint that you must bake for it to set. You must ensure that all surfaces are covered in this food safe paint.
File List and Print Instructions
Single Piece Parts
Langstroth Frame Top.stl - Print 1x, 100% infill The top of the frame, with little ears for supporting the frame at the proper width. This does not have a comb guide as it's expected that the user will want to provide foundation. Remix this appropriately.
Langstroth Frame Side Deep.stl - Print 2x This is the side of the deep frame. If you want to use frame wire, consider 100% infill here so you can use the hot wire to push through your printing material. It is not recommended to use deeps as the weight of the honey will be 7lbs (3kg) per frame and this puts considerable stress on the top bar.
Langstroth Frame Side Medium.stl - Print 2x This is the side of the medium frame. If you want to use frame wire, consider 100% infill here so you can use the hot wire to push through your printing material.
Langstroth Frame Side Shallow.stl - Print 2x This is the side of the medium frame. If you want to use frame wire, consider 100% infill here so you can use the hot wire to push through your printing material. This is the frame most likely to work.
Langstroth Frame Bottom.stl - Print 1x The bottom of the frame. Really nothing special, can be printed with minimal infill as almost no load will be experienced by this part.
Two Piece Parts
Two piece parts have to be cloned and mirrored along the X and Y axis to be properly used. In Cura, this can be accomplished by selecting the model, duplicating it, and then choosing mirror and selecting the red and green arrows.
Langstroth Frame Top 2 piece.stl - Print 1x, 100% infill, Duplicated per instructions This piece is keyed so that you can glue the two sides together, and then insert a nail or a dowel or a fixture of your choosing where the joint meets. This piece's joint cannot be enlarged without making the piece too big to print.
Langstroth Frame Bottom 2 part.stl - Print 1x, Duplicated per instructions This piece is keyed so that you can glue the two sides together, and then insert a nail or a dowel or a fixture of your choosing where the joint meets. This piece's joint should be able to accomodate a good fixture.
Fastening
There frames won't hold themselves together and unfortunately a beehive is built with wood as the material of choice. This means the frames are stapled or nailed together with very little clearance, so normal 3D printing rabbet and dado sort of assembly doesn't really have enough space to work well here without the frames being too large or otherwise out of spec. If you add material to the top of the frames, consider that it will touch the frames above it. Similarly, the bottom. You will need to glue the frame parts together, or print the parts at 100% infill so you can use nails, staples, and other woodworking fixtures to complete the frame.
Intro
Unless you have a massive 3D printer that can print 483 mm pieces, you're going to have to print this in several parts. I have provided both the original parts (preferred) and pre-cut parts which are split so they can be printed on a 250 mm printer. This means that some parts must stand up vertically if you use something like an Ender 3.
Do not scale this project unless building custom hive bodies.
While the frames could be assembled with 3D printed parts, also consider that these STLs could be used to generate templates for your own woodworking. Given the size of the top and bottom bars, and the relatively simple construction of these pieces, a mix-and-match of wooden tops and bottoms with 3D printed sides to create shallow (short), medium, and deep frames would be an excellent project.
A Note on Materials
PLA is generally considered food safe but you probably wouldn't seriously consider eating off your 3D printer bed or drinking out of the nozzle. Additionally the PLA manufacturers are not considering if things are "food safe" when choosing what to add to their PLA for color or effect. ABS, PETG, whatever else? Who knows. You must be responsible for your own safety, and the safety of the bees. Please don't just guess if a material is safe or not.
Additionally if you choose to glue (rather than mechanically fix) the joints of the frame, the glue must be food safe or encapsulated. Remember that there's precious, living organisms who are going to call this thing home. You're probably going to eat some of their honey. If you wouldn't want superglue in your honey, you need to encapsulate that somehow.
You can get food safe paint for crafting at your local craft store, which is designed for painting plates and similar. Read the instructions carefully, you cannot use a paint that you must bake for it to set. You must ensure that all surfaces are covered in this food safe paint.
File List and Print Instructions
Single Piece Parts
Langstroth Frame Top.stl - Print 1x, 100% infill The top of the frame, with little ears for supporting the frame at the proper width. This does not have a comb guide as it's expected that the user will want to provide foundation. Remix this appropriately.
Langstroth Frame Side Deep.stl - Print 2x This is the side of the deep frame. If you want to use frame wire, consider 100% infill here so you can use the hot wire to push through your printing material. It is not recommended to use deeps as the weight of the honey will be 7lbs (3kg) per frame and this puts considerable stress on the top bar.
Langstroth Frame Side Medium.stl - Print 2x This is the side of the medium frame. If you want to use frame wire, consider 100% infill here so you can use the hot wire to push through your printing material.
Langstroth Frame Side Shallow.stl - Print 2x This is the side of the medium frame. If you want to use frame wire, consider 100% infill here so you can use the hot wire to push through your printing material. This is the frame most likely to work.
Langstroth Frame Bottom.stl - Print 1x The bottom of the frame. Really nothing special, can be printed with minimal infill as almost no load will be experienced by this part.
Two Piece Parts
Two piece parts have to be cloned and mirrored along the X and Y axis to be properly used. In Cura, this can be accomplished by selecting the model, duplicating it, and then choosing mirror and selecting the red and green arrows.
Langstroth Frame Top 2 piece.stl - Print 1x, 100% infill, Duplicated per instructions This piece is keyed so that you can glue the two sides together, and then insert a nail or a dowel or a fixture of your choosing where the joint meets. This piece's joint cannot be enlarged without making the piece too big to print.
Langstroth Frame Bottom 2 part.stl - Print 1x, Duplicated per instructions This piece is keyed so that you can glue the two sides together, and then insert a nail or a dowel or a fixture of your choosing where the joint meets. This piece's joint should be able to accomodate a good fixture.
Fastening
There frames won't hold themselves together and unfortunately a beehive is built with wood as the material of choice. This means the frames are stapled or nailed together with very little clearance, so normal 3D printing rabbet and dado sort of assembly doesn't really have enough space to work well here without the frames being too large or otherwise out of spec. If you add material to the top of the frames, consider that it will touch the frames above it. Similarly, the bottom. You will need to glue the frame parts together, or print the parts at 100% infill so you can use nails, staples, and other woodworking fixtures to complete the frame.
Similar models
thingiverse
free
Electrical Wire Spool
... pieces, the hole in the cylinders are lined up. if they're not, you can't attach the beginning of the wire to the spool.
thingiverse
free
2 Socket Joint by OgoSport
...nctional toys you can use to create anything you can imagine. now you can download, modify, and print out your own custom pieces.
thingiverse
free
Minecraft Pickaxe XL by Claymore
...the file you need to install the basic prerequisites of my library.
mine rocks were designed using blender, source file attached.
thingiverse
free
Marineland Penguin 100 Media Basket by derglow
...at more of it hits one side.
print 1x bottom, 2x of the sides and 2x of the "front" and superglue the pieces together.
thingiverse
free
Kitchen Towel Eiffel Tower - Eiffel toweller by Pupok7878
...h_middle.stl
1x kitchen_towel_eiffel_tower_clutch.stl
4x kitchen_towel_eiffel_tower_feet_with_clutch.stl
no need to use supports.
cg_trader
$3
Lion head wall decoration | 3D
...h matter). rafts: no. supports: no. infill: 15-40% (but if you want it so much heavier use 100%) use stl for your slicer program.
thingiverse
free
Sponge Bed Frame (remix) by NXTMOD
... out the bottom, so it just slides together with the frame, without using toothpicks or whatever.
no glue or extra pieces needed.
thingiverse
free
Mini cradle by Mewalela
...he parts together with a special glue for wood.
this is a link to all miniature furniture for dollhouse i've designed so far.
grabcad
free
pure joint furniture 8
...pure joint furniture 8
grabcad
this is a piece of furniture that can be make without using nails and glue.
grabcad
free
pure joint furniture 7
...pure joint furniture 7
grabcad
this is a piece of furniture that can be make without using nails and glue.
Langstroth
3d_ocean
$9
Langstroth Beehive - Real Size / 3 Models
...1 model of queen excluder 1 model size of dadant frames 1 model of standard size hive body 3 models of bottom board 1 model of...
thingiverse
free
Queen Excluder For Langstroth Beehive by josephclarke333
...hclarke333
thingiverse
made my own take on the queen excluder for the langstroth beehive model. made to print well not to scale.
thingiverse
free
Modularized Entrance Reducer by prettyflyforabeeguy
...various sizes. it was made with a 10 frame langstroth hive in mind but would probably work for a...
thingiverse
free
Bee Queen Excluder by guppyk
...way to use these on larger size supers/hives (e.g. langstroth or dadant) would be to insert a wooden board...
thingiverse
free
Langstroth bee hive with locating pins by RedSled
... super on the brood box and add pins to the top of the super. that's it. you don't need pins in the inner or outer cover.
thingiverse
free
Craftsman Bench Saw Moulding Kit Storage Box by hancockks
...one purpose only, and that's to cut handholds into langstroth hive boxes for honey bees. it's annoying to disassemble...
3d_sky
free
Beehive Dadant
...life he studied design dadan other inventors such as langstroth james kwibi moses and others. dadan and spent his...
thingiverse
free
Langstroth Med frame by tracer235
...langstroth med frame by tracer235
thingiverse
langstroth medium frame
thingiverse
free
Langstroth Hive Robbing Screen
... can work for 8 or 10 frame hives. attach it with push pins or screws. print it in a light color to keep it from getting too hot.
Hive
cg_studio
$25
Honeycombs3d model
...hive tasty vray food beehive wasp honey nest skep bee-hive forest garden breed breeding wild .max .fbx .obj -...
3ddd
$1
3D панель SKU UWWF HIVE
...
3d панель sku uwwf hive
45.72 см х 45.72 см (18 х 18inch)http://www.urbanwallcovering.com/product-p/wall-flat-hive.htm
3ddd
$1
Poppy
...poppy 3ddd poppy , hive , напольный светильник торшер poppy, d60 x 180h, бумага,...
3ddd
$1
Коллекция паркета Jamie Beckwith. Part 02
...beckwith.http://jamiebeckwithcollection.com/collections/enigma/ часть 2, включающая следующие модели: - pisces - hive - jigsaw - stella - grover модели выполнены геометрией,...
3d_ocean
$9
Langstroth Beehive - Real Size / 3 Models
...1 model of queen excluder 1 model size of dadant frames 1 model of standard size hive body 3 models of bottom board 1 model of...
3d_ocean
$25
HQ low poly 3d model of bee worker for animation
...animation 3docean 3d bee bee worker drone flower fly hive honey insect queen sting texture worker really high quality...
3ddd
$1
Настольный светильник Dragon's tail
...настольный светильник dragon's tail 3ddd hive , dragon's tail известные на весь мир персонажи из...
3ddd
$1
Hive sleepy oak chair
... hive , sleepy
крело hive sleepy oak. материалы corona render
3ds max 2014 + obj
3ddd
$1
Normann Copenhagen / Hive lamp
...penhagen
люстра из последней коллекции все подробности тутhttp://www.normann-copenhagen.com/products/hive-lamp?v=502150
3ddd
$1
Hive half pipe desk
... pipe , письменный
стол hive half pipe desk. материалы corona render
3ds max 2014 + obj
Frame
3d_export
$29
StJames Framed Panel Bed 3D Model
...oration hardware bedding interior classic furniture quilt bedclothes pillow
stjames framed panel bed 3d model ntsa 69963 3dexport
3d_export
$25
Merida Cyclo Cross Carbon Team 2012 frame set 3D Model
...cross carbon 2012 fork textured team printable
merida cyclo cross carbon team 2012 frame set 3d model maisterunner 50751 3dexport
3ddd
$1
Krystalia / Sharky
...the rear of the chair, the coupling between the frame and the base. the structure has a polyurethane finish...
3ddd
$1
Decor Frame
...decor frame
3ddd
картины
decor frame
3ddd
$1
IKEA SODERHAMN
...cm height: 83 cm product description frame three-seat section: frame plywood, fibreboard, moulded beech plywood, beech veneer, steel, felt,...
3ddd
$1
Thonet S 64 Pv
...cold foam, seams with black synthetic welt, round tubular frame 25x2mm, w 58 d 62 h 80 sh 46...
3ddd
$1
Homes in Heaven Boyd sofa
...3ddd homesinheaven reference: 1117002 dimensions: 132x83x92 cm materials: - frame solid wood, paint and clear acrylic lacquer - back...
3ddd
$1
Dresser Romantic Cirrus Big
...cirrus big 3ddd комод , kare , romantic material: frame mango wood, drawer and back board: mdf, cover: mother...
3ddd
$1
Багеты Mirrored Collage Frame Gallery
...tt%253dmirrored%252bcollage%252bframe%252bgallery%2526_requestid%253d33379&eitemid;=cprod97830101&cmcat;=search
3ddd
$1
3DDD FRAMES
...3ddd frames
3ddd
3ddd frames