Lamp Cover set for the Syma X5c/d360 Drone

Last crawled date: 4 years, 3 months ago

So I designed this component that I called lamp cover set for the
Syma X5c/d360 Drone. I design the 3D printed component for the
purpose of replacing the lamp cover drones in case one of them are
lost. And I did lose one of them at another Park one day in my Syma
x5c drone. And I wanted to replace the stock lamp cover on my Syma
d360 drone because I replace the stock led lights that came with the
d360 Drone because I wanted to add front and rear lights on my d360
drone and as a result I ran into some problems with the stock lights
that came with the Drone. So I ended up replacing the stock leds with
the new ones and the problem was fixed. But as a result the new led
lights and the stock lamp covers that came with the D360 drone and
the colors did not match. So I designed these lamp covers set to
solve two problems with one solution. If you wish download this file.
You will need clear filament pla would be the best, and I would
recommend that you use a glass bed to do this job to make it look
better and the photo should show you how it should look like and
its results so enjoy.