Thingiverse
Lada Niva jack add-on by iiKster
by Thingiverse
Last crawled date: 4 years ago
The original jack on the Lada Niva has a design feature, if you don't pay attention to what you are doing while lifting the car you might damage your paintwork. When rotating the handle the other end of the axel on the jack can scuff your paint. This add-on hides the rorating part and the jack won't do as much damage as before.
This thing consists of two pieces, the shield that snaps on the jack and the nipple in the center that hides the end of the rotating axel. The pieces snaps on, no tools or additional hardware required.
Print in PLA / PET-g / ABS, does not matter. You can print whitout supports if your setup can negotiate overhangs.
This thing consists of two pieces, the shield that snaps on the jack and the nipple in the center that hides the end of the rotating axel. The pieces snaps on, no tools or additional hardware required.
Print in PLA / PET-g / ABS, does not matter. You can print whitout supports if your setup can negotiate overhangs.