Thingiverse
Lack Leg Support
by Thingiverse
Last crawled date: 5 years, 10 months ago
Ikea Lack End Table Leg Support
Lack coffee tables sure are great for the price but they're also super flimsy & jiggly.
Their jigglyness makes using them as a printer stand a bit problematic. For that reason, I went ahead and threw together this bracket that makes the legs much more rigid.
Supplies needed:
4 of these brackets
5 1/4inx1in lag screws per bracket (or similar size)
Instructions:
Apply woodglue to the bottom of the legs before screwing them down into the table top. This alone, will make the table more sturdy.
Print 4 brackets --STL found here
Use one of the brackets as a guide to pre-drill the 5 holes per leg. These larger screws will crack the legs otherwise.
Use the 1/4"x1" lag screws to attach the brackets to the table (you'll need 25 screws total)
optional: I went ahead & applied woodglue underneath the brackets because I'm paranoid.
Lack coffee tables sure are great for the price but they're also super flimsy & jiggly.
Their jigglyness makes using them as a printer stand a bit problematic. For that reason, I went ahead and threw together this bracket that makes the legs much more rigid.
Supplies needed:
4 of these brackets
5 1/4inx1in lag screws per bracket (or similar size)
Instructions:
Apply woodglue to the bottom of the legs before screwing them down into the table top. This alone, will make the table more sturdy.
Print 4 brackets --STL found here
Use one of the brackets as a guide to pre-drill the 5 holes per leg. These larger screws will crack the legs otherwise.
Use the 1/4"x1" lag screws to attach the brackets to the table (you'll need 25 screws total)
optional: I went ahead & applied woodglue underneath the brackets because I'm paranoid.