Thingiverse
Labyrinth Gift Box by willenberg42
by Thingiverse
Last crawled date: 4 years, 10 months ago
Labyrinth puzzle box
Inspired by Sneakypoo's design:https://www.thingiverse.com/thing:201097
Great way to pack little presents for your puzzle-intrigued friends and family. The same labyrinth is copied 3 times on the core (120° each), with three corresponding nibs inside the cap, therefore the connection is reasonably stable.
Inner dimensions:
Diameter 60mm; height 60mm.
Outer dimensions (assembled):
Diameter 73mm; height 66.75mm.
Printing advice:
Gap between parts is .25mm, so make sure your printer and material are accurate enough. The gap and inside volume can obviously be increased by scaling up both parts proportionally in the slicer.
The cap has been printed right side up with a support structure on our printer to make the top surface with the star decoration look smoother. Wasteful in terms of material; might not be necessary if you can print without a raft.
Inspired by Sneakypoo's design:https://www.thingiverse.com/thing:201097
Great way to pack little presents for your puzzle-intrigued friends and family. The same labyrinth is copied 3 times on the core (120° each), with three corresponding nibs inside the cap, therefore the connection is reasonably stable.
Inner dimensions:
Diameter 60mm; height 60mm.
Outer dimensions (assembled):
Diameter 73mm; height 66.75mm.
Printing advice:
Gap between parts is .25mm, so make sure your printer and material are accurate enough. The gap and inside volume can obviously be increased by scaling up both parts proportionally in the slicer.
The cap has been printed right side up with a support structure on our printer to make the top surface with the star decoration look smoother. Wasteful in terms of material; might not be necessary if you can print without a raft.