Thingiverse
Lab Power Supply by Chordless
by Thingiverse
Last crawled date: 4 years, 7 months ago
UPDATE: I have made a new case for this power supply, with some improvements. The parts used, and instructions, are esentially the same as this Lab Power Supply. Link to new version:Tiny e-Lab Edition
An inexpensive, adjustable lab power supply. Requires an external DC power supply with a voltage somewhere between 12-30V to function. I use an old laptop-charger.
Based on a XL4015 DC-DC buck converter from ebay (link in BOM section). This provides an adjustable output-voltage from about 1.4V, up to the input voltage (nearly). Current limit can be set from 0mA, up to about 5A. The converter is rated for 75W, but if you plan to use this much power over longer periods, you will probably need extra cooling. The converter module has thermal shutdown and short circuit protection built in.
Approximate total cost of parts (excluding printed parts and external PSU): 16$
Dimensions: 14cm x 6cm x 5cm
Thanks to Heartman for the awesome parametric box, and charliearmorycom for the knob customizer.
UPDATE: Enlarged the text on the front-panel, and added printable potentiometer-knobs.
UPDATE 2: Updated BOM to specify 10kΩ potentiometers, not 2.2kΩ!
An inexpensive, adjustable lab power supply. Requires an external DC power supply with a voltage somewhere between 12-30V to function. I use an old laptop-charger.
Based on a XL4015 DC-DC buck converter from ebay (link in BOM section). This provides an adjustable output-voltage from about 1.4V, up to the input voltage (nearly). Current limit can be set from 0mA, up to about 5A. The converter is rated for 75W, but if you plan to use this much power over longer periods, you will probably need extra cooling. The converter module has thermal shutdown and short circuit protection built in.
Approximate total cost of parts (excluding printed parts and external PSU): 16$
Dimensions: 14cm x 6cm x 5cm
Thanks to Heartman for the awesome parametric box, and charliearmorycom for the knob customizer.
UPDATE: Enlarged the text on the front-panel, and added printable potentiometer-knobs.
UPDATE 2: Updated BOM to specify 10kΩ potentiometers, not 2.2kΩ!