Lab Hooks - push and twist to lock Ø8mm Aluminium Slot Section by bathrobotics

Last crawled date: 3 years ago

Slightly longer Heel. Now in Ø8mm for supporting extension cables.
Aluminium Section 80mm
These fit Standard 80mm Aluminium Section.
Based on a design which worked, but I wasn't happy with:http://www.thingiverse.com/thing:637773
Then Along Came:http://www.thingiverse.com/thing:642899
I've included a Combined Print STL to allow a plate to be packed better with these babies.
See the Spiggot on the upper side of the Hooks? (Nearest Front on the Thingiview which I can't seem to rearrange) - that prints upwards. That fits into a socket which is printed on the underside of the hooks.
Now ALL my lab hooks WILL fit together, but I intend the two hooks of the same sizes to be interlocked: this prevents the hooks rotating out and releasing. It's up to you!
Now available in Ø8mm, Ø12mm & Ø16mm.
This was made for the Aluminium section in our lab, which has shed loads of pneumatic pipes everywhere so this will help me organise the place.
I have printed a load of these, and they print well (See "Made").
The Heel is longer so the hook clicks better into position.
Eur Ing Andy Southern,
Design upload for 29th January 2015.
Bath Robotic
Bathrobotics.