L-Cheapo RigidBot MK2 Mount by MediaXtudio

Last crawled date: 3 years ago

RigidBot especific mount for the L-Cheapo laser cutter tool with the MK2 PCB. The mounting holes are 25 mm apart so it can mount directly over the X belt attachment bolts.
Tested on IAP's OEM single extruder carriage and should work with the Dual Extruder version as well.
UPDATE: 3 years later... Turns out that printing this on PLA isn't such a great idea, it slowly deforms under it's own weight. That's partly a design flaw because weight applies a constant rotational force to the screw holes... Need to re-design and make it lighter.
WARNING: Keep in mind that the laser is some 87 mm behind your nozzle so the beam can hit well beyond your Y limit, if you are careless you could cut your Y belt or any cables below the printer bed (the heated bed cable is a prime candidate). You are supposed to use a sacrificial surface between the printer bed and whatever you are cutting and that sacrificial piece should extend more than 87 mm towards the back on the Y direction.