Thingiverse
Kärcher WV2 Sprühflasche Wandhalterung_V2b by pgraaff
by Thingiverse
Last crawled date: 3 years, 1 month ago
I was often searching for the little spray bottle that comes with the Kärcher WV2 set . Now it has his place. This is a version with greater distance to the wall. The holes in the front are ment for a screwdriver to easaly mount it. Use 4 x 30 or longer screws to mount. Yuo can find version 3 at https://www.thingiverse.com/thing:2860757
Halterung für die Sprühflasche, die mit dem WV2 Fenstersauger im Set geliefert wird. Dies ist eine Version mit größerem Wandabstand. Die Löcher in der Front sind zur einfacheren Befestigung mit einem Schraubendreher. Zur Befestigung 4 x 30 (oder länger) Senkkopfschrauben verwenden. Version 3 befindet sich auf https://www.thingiverse.com/thing:2860757
Halterung für die Sprühflasche, die mit dem WV2 Fenstersauger im Set geliefert wird. Dies ist eine Version mit größerem Wandabstand. Die Löcher in der Front sind zur einfacheren Befestigung mit einem Schraubendreher. Zur Befestigung 4 x 30 (oder länger) Senkkopfschrauben verwenden. Version 3 befindet sich auf https://www.thingiverse.com/thing:2860757
Similar models
thingiverse
free
Kärcher WV2 Sprühflasche Wandhalterung_V3 by pgraaff
...estigung 4 x 30 (oder länger) senkkopfschrauben verwenden. version 2 befindet sich auf https://www.thingiverse.com/thing:2857559.
thingiverse
free
Kärcher WV2 Sprühflasche Wandhalterung_V1 by pgraaff
... einen größeren abstand zur wand halten. https://www.thingiverse.com/thing:2857552 oder https://www.thingiverse.com/thing:2857559
thingiverse
free
Kärcher WV2 Wandhalterung V1_1 by pgraaff
...iverse.com/thing:2864358
den halter für die sprühflasche findet ihr auf https://www.thingiverse.com/thing:2857559
happy cleaning.
thingiverse
free
Kärcher WV2 Wandhalterung V1_2 by pgraaff
.... wem schrauben lieber sind, möge sich meine andere version auf https://www.thingiverse.com/thing:2864328 ansehen.
happy cleaning
thingiverse
free
IGUS RJMP-01-08 Halter by einherjer
...erfolgt mit seegerringen.
based on http://www.thingiverse.com/thing:28704 - the mounting of the bearings is done by snap rings.
thingiverse
free
window hinge top cover by pgraaff
...deckung hat rastnasen zur besseren befestigung. die untere abdeckung findet sich unter https://www.thingiverse.com/thing:2777234.
thingiverse
free
45grisu by 45grisu
...enhalter.
ich verwende 2 versionen von bürsten. einmal durchsichtig aus laminierfolie und des weiteren aus 2 mm weißem moosgummi.
thingiverse
free
10c20 Cable Chain Mount by DerWombi
...or the following 10x20 drag chain:https://www.thingiverse.com/thing:3141936
i needed the mouunt for my i3 mega mk4 modification.
thingiverse
free
DeWalt 611 Air Diffuser ver 4 by menerso
.... this model is only the piece that connects to the dewalt 611, you will need to download @dewitt model to mount to my diverter.
thingiverse
free
Holder for kärcher WV-50 window vacuum; Halter für Kärcher WV-50 Fenstersauger by Renngarage
...kabel.
der staubsaugerhalter eignet sich auch perfekt zur aufbewahrung von verpackten 9v blockbatterien und lithium cr batterien!
Sprühflasche
thingiverse
free
Kärcher WV2 Sprühflasche Wandhalterung_V1 by pgraaff
... einen größeren abstand zur wand halten. https://www.thingiverse.com/thing:2857552 oder https://www.thingiverse.com/thing:2857559
thingiverse
free
Kärcher WV2 Sprühflasche Wandhalterung_V3 by pgraaff
...estigung 4 x 30 (oder länger) senkkopfschrauben verwenden. version 2 befindet sich auf https://www.thingiverse.com/thing:2857559.
thingiverse
free
Holder for kärcher WV-50 window vacuum; Halter für Kärcher WV-50 Fenstersauger by Renngarage
...für den kärcher fenstersauger wv 50 und die dazugehörige sprühflasche der halter für den sauger hat eine öffnung für...
thingiverse
free
Kärcher WV2 Wandhalterung V1_1 by pgraaff
...mit spiegelkleber anbringen kann https://www.thingiverse.com/thing:2864358 den halter für die sprühflasche findet ihr auf https://www.thingiverse.com/thing:2857559 happy...
grabcad
free
water sprayer/ Sprühflasche
...water sprayer/ sprühflasche
grabcad
water sprayer for household/ hair stylist
pumpzerstäuber
Wv2
3d_export
$18
Wooden Vintage Plaques WV2
... about the model 1. model created with 3ds max 2. this model is accurately sized to match the real object. 3. renders using vray5
thingiverse
free
Kärcher WV2 Wandhalterung V1_2 by pgraaff
.... wem schrauben lieber sind, möge sich meine andere version auf https://www.thingiverse.com/thing:2864328 ansehen.
happy cleaning
thingiverse
free
Karcher WV2 Window Vac hangers by ukwebb
...karcher wv2 window vac hangers by ukwebb
thingiverse
a simple hanger for the karcher window vac
thingiverse
free
Kärcher WV2 Sprühflasche Wandhalterung_V1 by pgraaff
... einen größeren abstand zur wand halten. https://www.thingiverse.com/thing:2857552 oder https://www.thingiverse.com/thing:2857559
thingiverse
free
Kaercher WV2 Replacement Part by lamiskin
...skin
thingiverse
supports required.
my take on the replacement part which i created before seeing the version from blackhandcru.
thingiverse
free
Kärcher WV2 Wandhalterung V1_1 by pgraaff
...iverse.com/thing:2864358
den halter für die sprühflasche findet ihr auf https://www.thingiverse.com/thing:2857559
happy cleaning.
thingiverse
free
Kärcher WV2 Sprühflasche Wandhalterung_V3 by pgraaff
...estigung 4 x 30 (oder länger) senkkopfschrauben verwenden. version 2 befindet sich auf https://www.thingiverse.com/thing:2857559.
thingiverse
free
Karcher Window Vac WV2 wall mount by kkolszewski
...archer window vac. bracket is commont for vac unit and spray bottle.
step file attached so can be remixed for different hole size
thingiverse
free
I-Sobot by elik745i
..."hlrs", "hdsk", "ylike", "mstr5", "tpy", "tklm", "tdft", "needb", "wv1", "wv2quot;, "aplse", "mtr6", "tsexy", "clink", "rlx", "scr1", "scr2", "scr3", "lift",...
V2B
thingiverse
free
Box with Lid for cotton pads 55mm (PLA hinge) v2B by GreenRider
...t to connect the lid to the box, heat the second end and push a flat metal object against it to make it flat and close the hinge.
thingiverse
free
Brush Holder by s_p_e_x
...can now open the stl in slic3r without issues. v2b i cleaned up the mesh a bit in sketchup...
thingiverse
free
Bike Carry Handle by p_svitek
...carry handle by p_svitek thingiverse larger (v2) and smaller (v2b version of a bike frame handle. designed for a...
thingiverse
free
Chapas Wolverine (Lobezno) by Rammaukin
...más, chapawolverine-v3, con las letras hacia fuera. correjido fallo chapawolverine-v2b ...
thingiverse
free
Spherical Joint Models by ramkam
...using a raft to avoid squishing the bottom layer. v2b - has a very little backlash (near to none,...
thingiverse
free
30mm Extension Comb for Wahl Deluxe Hair Clipper by DeepDiver
...desired length. please tip me, if you satisfied :-) v2b is not tested or printed...
thingiverse
free
Lanyard Holder for RSA Token
...sizing) (v2: not published, modified from v1 for sizing) v2b stl file is for a three loop lanyard attachment,...
thingiverse
free
Prusa 2 front side panel clip for XXL Smart LCD Controller by i-make-robots
...v2a for the 63mm side of the board, and v2b for the 80mm side. should be a snug fit....
thingiverse
free
One piece spool holder by bne
...the bottom of the spool !!!!! update!! new version (v2b with 4,2 mm hole and 4mm pivot, for easy...
thingiverse
free
Great Wall M2/M4 "bullet style" wheel center cap by OBN_RacerMan
...with individual bolts another color, then "chrome color" painting. v2b and v3b use the same bolts. p.s. also i...
Pgraaff
thingiverse
free
Mk8 nozzle rack by pgraaff
...mk8 nozzle rack by pgraaff
thingiverse
simple rack for mk8 nozzles. one hole for each material i am using.
thingiverse
free
cap for 20mm pipes by pgraaff
...
thingiverse
this caps are for the handle bars of dslr shoulder rig https://www.thingiverse.com/thing:29677. i made them of pla.
thingiverse
free
cap for 15mm pipes by pgraaff
...giverse
this caps fit the 15mm pipes for this dsl shoulder rig https://www.thingiverse.com/thing:29677. i printed them with pla.
thingiverse
free
glass coasters container by pgraaff
... design with freecad. the export was difficult because the rounded edges went lost when exporting as stl.
have fun keeping order.
thingiverse
free
surface pro 4 stand_V1 by pgraaff
... stand_v1 by pgraaff
thingiverse
this is a surface pro 4 stand to use the camera for documents.
the print takes at least 4 days!
thingiverse
free
Creality Ender 2 tool holder_V3 by pgraaff
...creality ender 2 tool holder_v3 by pgraaff
thingiverse
i lifted the pin that holds the tools slightly up to 5°.
thingiverse
free
surface pro 4 stand_v2 by pgraaff
...2 by pgraaff
thingiverse
this part must be combined with a 6.5mm multiplex wood plate. its faster printed then my first version.
thingiverse
free
handle for M6 nuts and screws by pgraaff
...y pgraaff
thingiverse
handle for m6 nuts and screws. i use them for a dslr shoulder rig https://www.thingiverse.com/thing:29677.
thingiverse
free
vacuum cleaner nozzle holder V2 by pgraaff
...by pgraaff
thingiverse
vacuum cleaner nozzle holder for kärcher vacuum cleaner. holes in 50mm distance to mount no steel shelfs.
thingiverse
free
Filament cooler with clamp by pgraaff
... bowden tube by clamps. you need the original hotend cooler https://www.thingiverse.com/thing:2751027 to mount all to the hotend.
Kärcher
thingiverse
free
Kärcher Staubsaugeradapter by DerRob
...kärcher staubsaugeradapter by derrob
thingiverse
anschluss vom kärcher bajonett verschluss auf 55mm (zyklon)
thingiverse
free
Kärcher Aufsatz Düse by Pitschpitsch
...kärcher aufsatz düse by pitschpitsch
thingiverse
kärcher staubsaugeraufsatz 3,1mm innendurchmesser
thingiverse
free
Schlauchhalter Kärcher WD3 by 11880
...schlauchhalter kärcher wd3 by 11880
thingiverse
it´s a tube holder for the kärcher wd3.
thingiverse
free
Halterung Kärcher Teleskopstrahlrohr by angry_nameless
...kärcher teleskopstrahlrohr by angry_nameless
thingiverse
halterung, um das kärcher teleskopstrahlrohr an der wand zu befestigen.
thingiverse
free
Makita to Kärcher(WD3) by Dweric
...makita to kärcher(wd3) by dweric
thingiverse
desinged for makita router rt0701c to fit my wd3 p from kärcher
thingiverse
free
Holder for Kärcher SE 4001 by Fotonoska
...holder for kärcher se 4001 by fotonoska
thingiverse
holder for kärcher se 4001
thingiverse
free
Kärcher joint l/r by cornej
...kärcher joint l/r by cornej
thingiverse
replacement part for kärcher nozzle
thingiverse
free
Kärcher Bosch Adapter by steeeve
...kärcher bosch adapter by steeeve
thingiverse
adapter to connect bosch devices to a kärcher vaccum. i use it with my 12v devices
thingiverse
free
Holder for Kärcher options(Pressure washers) by yuri9999
...holder for kärcher options(pressure washers) by yuri9999
thingiverse
holder for kärcher
thingiverse
free
Kärcher FC7 roller rack by Tiras31
...kärcher fc7 roller rack by tiras31
thingiverse
rack to store and transport the rollers for a kärcher fc7 hard floor cleaner.
Wandhalterung
thingiverse
free
Dartpfeile Wandhalterung
...dartpfeile wandhalterung
thingiverse
dartpfeile wandhalterung
thingiverse
free
Wandhalterung by Luberl898
...wandhalterung by luberl898
thingiverse
this is a holder for a z-wave buton
thingiverse
free
Blackview Handy Wandhalterung by vectraotto
...blackview handy wandhalterung by vectraotto
thingiverse
blackview handy wandhalterung
thingiverse
free
Wandhalterung by Harry
...n dinge an der wand fixieren.
die schrauben sind verdeckt.
man kann verschiedene halterungen jederzeit gegeneinander austauschen.
thingiverse
free
Dartpfeile Wandhalterung mit Schale
...dartpfeile wandhalterung mit schale
thingiverse
dartpfeil wandhalterung mit schale
thingiverse
free
HiKam Q8 Wandhalterung by Enanode
...hikam q8 wandhalterung by enanode
thingiverse
wandhalterung für die hikam q8.
thingiverse
free
Filament Wandhalterung by DirksBastelbude
...filament wandhalterung by dirksbastelbude
thingiverse
thingiverse
free
Wandhalterung. 22x22mm by DirksBastelbude
...wandhalterung. 22x22mm by dirksbastelbude
thingiverse
thingiverse
free
10" Tablet Wandhalterung by Jaegerdrucker
...10" tablet wandhalterung by jaegerdrucker
thingiverse
tablet wandhalterung für zt pad
thingiverse
free
Oral-B Wandhalterung by Pascal_1966
...oral-b wandhalterung by pascal_1966
thingiverse
oral-b wandhalterung für's wohnmobil