Kyosho Ultima ST front wheel RS-21

Last crawled date: 4 years, 3 months ago

Kyosho Ultima ST GP/EP front wheel. Part.nr: RS-21. This is also a discontinued part, so its hard/impossible to find.
Stock Ultima ST bearing size, stock offset, stock width, stock everything, except the face, which is lightened.
Almost same weight than original wheel. If i recall correctly, this is might be as light as original wheel, when printed from PETG with 100% infill. If you print this upside down, so the face of the wheel is towards the printing bed, you only need a small support for the wheel axle nut area. (the wheel face has 45% angle).
Enjoy and drop a comment how did it work for you, or if you want any changes to be made!
Also check my other parts that i have made to Ultima ST Racing Sports/Type-R/Evolution chassis.
Here are the links to my project:
https://www.rcuniverse.com/forum/rc-nitro-stadium-trucks-243/11675757-my-ultima-st-gp-type-r-evo-20th-anniversary-project-3d-printed-cf-parts.html
https://www.rc10talk.com/viewtopic.php?f=30&t=44634