Thingiverse
Kyosho Inferno ve front left knuckle arm by 1D_Design
by Thingiverse
Last crawled date: 5 years, 1 month ago
Kyosho Inferno ve front left knuckle arm, make sure the base side is flat on the bed as illustrated with the photo.
infill 30-50%
wall thickness 1.5-2mm
need support
ABS for long-lasting
(after printing holes may need rimming with a drill bit )
infill 30-50%
wall thickness 1.5-2mm
need support
ABS for long-lasting
(after printing holes may need rimming with a drill bit )