kWeld & Kcap enclosure by aflecha

Last crawled date: 4 years, 10 months ago

Enclosure for KWeld and KCaps, I use a stepdown converter to charge the KCaps which is integrated on the bottom of the case and a PSU connected to the stepdown to power the unit. The on/off switch is to disconect the load of the caps on the buck converter to change on and off the volts incomming to the KCaps. The GX16 connectors are for the pedal and auxiliary power.
This is V1, will be updating once I have another version available.'
Materials:
GX16 2 pin connectors - 2pcs
8amps stepdown converter (optional)
22mm x 14mm Volt meter
10mm x 15mm on/off switch
Original Kcap standoffs - 4pcs
M4 Hex Screws (4pcs - 35mm and 4pcs - 15mm)
80mm fan with 3 pin connector