Thingiverse
KTM 990 ADV Garmin Montana Mount by renzop
by Thingiverse
Last crawled date: 4 years, 5 months ago
This is Mount to put a Garmin Montana on a KTM 990 Adventure. The GPS is then right above the speedometer. There is a second bracket nececessary to mount it inside the navigation pole. But i did not finish that yet.
It requires also the Garmin Automotive or the Bycicle mount.
I would go for gyroid infill since this shows the same strength in every direction, but not every slicer can do it. I would also recommend to have three permimeters to be very stable... Since there are a lot vibration on a bike and you don't want to loose your gps :-) (PETG shows a better stability to vibrations than PLA)
I would love to see a make and see it mounted on a KTM :-) cheers
It requires also the Garmin Automotive or the Bycicle mount.
I would go for gyroid infill since this shows the same strength in every direction, but not every slicer can do it. I would also recommend to have three permimeters to be very stable... Since there are a lot vibration on a bike and you don't want to loose your gps :-) (PETG shows a better stability to vibrations than PLA)
I would love to see a make and see it mounted on a KTM :-) cheers