Thingiverse
Krytac Airsoft Magazine Baseplate by Arexz
by Thingiverse
Last crawled date: 2 years, 11 months ago
Original design for the Magpul Plate: https://www.thingiverse.com/thing:1443089
Replacement Baseplate for the Airsoft Krytac M4 Magazine without the Logo & "Magpul PMAG® Ranger Plate™" Themed Baseplate.
It needs some sanding on the bottom after printing so it fits more smoothly.
To get it off, you need to poke a small screwdriver, stick, cleaning rod, etc. down the hole on top and push the baseplate off.
Enable support everywhere.
If the thin walls don't stick to the bed or cave in a bit, just add a brim in your slicer software. About 5mm should be enough.
If the inner part of your magazine is a bit loose after installation, put a piece of tape, between the baseplate and the magazine. (should not be necessary tho)
GLHF ^^
Replacement Baseplate for the Airsoft Krytac M4 Magazine without the Logo & "Magpul PMAG® Ranger Plate™" Themed Baseplate.
It needs some sanding on the bottom after printing so it fits more smoothly.
To get it off, you need to poke a small screwdriver, stick, cleaning rod, etc. down the hole on top and push the baseplate off.
Enable support everywhere.
If the thin walls don't stick to the bed or cave in a bit, just add a brim in your slicer software. About 5mm should be enough.
If the inner part of your magazine is a bit loose after installation, put a piece of tape, between the baseplate and the magazine. (should not be necessary tho)
GLHF ^^
Similar models
thingiverse
free
Baseplate for GBB Glock by Joledingue
...
large baseplate for airsoft glock gbb magazine. tested with aac and we magazine, should be compatible with all the others mags.
thingiverse
free
AR-15 Magazine Base Plate by martialmedia
...ingiverse
this is a base plate for an ar-15 magazine. this one was designed for magpul pmag magazines but should fit all brands.
thingiverse
free
MAGPUL M3 Base Plate Replacements by Mechanical_Lyn
...l not be fully drop resistant. none of these will be stronger than duct tape or the current existing baseplate on your magazines
thingiverse
free
Airsoft Sig Sauer M17 Magazine Baseplate by MrLongFace
...irsoft sig sauer m17 magazine baseplate by mrlongface
thingiverse
custom slim magazine baseplate with a cutout for the co2 screw
thingiverse
free
Magpul PTS PDR-c (PDR) Battery Baseplate by CJay9209
...d in addition increasing battery compartment size allowing the use of regular buffer tube style batteries.
design by ast airsoft.
thingiverse
free
CP33 magazine baseplate
...azine. i used part of martialmedia's design and adapted it to fit my application.
https://www.thingiverse.com/thing:1443089
cg_trader
$15
single stack magazine baseplate extension for glock magazines | 3D
...nes | 3d
cg trader
3d printable model single stack magazine baseplate 3 airsoft, available in stl, ready for 3d animation and ot
thingiverse
free
Airsoft DragonFly D-mod magazine base plate by Bsoccer4
...rsoft dragonfly d-mod magazine base plate by bsoccer4
thingiverse
if you happen to lose/break your base plate for your magazine.
thingiverse
free
Magazine Baseplate for CYMA gel blaster magazine by bonj
...his is a replacement base plate for a cyma gel blaster magazine.
picture shows customised baseplate, this thing is a blank plate.
thingiverse
free
Magazine Insert - Magpul PMAG Gen 3 by macobaco
...magazine insert for a magpul pmag gen 3 magazine. be careful to not break off the tabs when connecting it to the magazine spring.
Krytac
thingiverse
free
Krytac Shorty Setup
...krytac shorty setup
thingiverse
this is a short barrel and handguard assembly for krytac series of aegs.
thingiverse
free
Krytac Logo by Hrocha
... hrocha
thingiverse
for who wants to create anuthing for his krytac airsoft weapon, here you have its logo. good prints everyone
thingiverse
free
Krytac Vector Rail by ZonePrism
...ingiverse
krytac vector rail, combination of (superpoo and gohdesign) designs and measurements. not yet tested. for airsoft use.
thingiverse
free
Krytac Vector Drop Stock by ZonePrism
...krytac vector drop stock by zoneprism
thingiverse
ability to run a mask and m4 stock on krytac kriss vector
thingiverse
free
Krytac Lvoa M-LOK handguard
... advice to print it upward to avoid too much support. mine still alive after i fell on it so i think it can support a common use.
thingiverse
free
Krytac Trident 2 Selector Plug for HPA conversion by TheBurk
...d right selector lever.
it is a press fit but some people use a dot of glue.
please donate every design takes hours. thank you :)
thingiverse
free
Krytac Vector M4 Drop Stock by ZonePrism
...ar a mask and look down sights, it drops the stock down and angles it 5 degrees. there is also routing to run a rear wired setup.
thingiverse
free
Llavero Krytac by cduque
...tos that were attached are 2 tests in pla + to 220th and 60th bed i do not stay very well in the last layers.
feel free to resize
thingiverse
free
Krytac Kriss Vector Latch by Astro_Mittens
...tch. i couldnt find a latch on here so i decided to design one in the hope that i can help someone in the same situation as me :)
Baseplate
3d_export
$10
frou frou parasol
...of stainless steel and is anchored in a steel baseplate<br>a parasol with a central pole can be opened manually,...
thingiverse
free
EEZYbotARM baseplate
...eezybotarm baseplate
thingiverse
eezybotarm baseplate
https://www.youtube.com/watch?v=-yf_nm50kyu
3dfindit
free
S6430 Baseplate
...s6430 baseplate
3dfind.it
catalog: wema
thingiverse
free
Baseplate Holder by dsmith1960
...isit pixel hobby at http://www.pixelhobby-usa.com/ and see what you can do with a photo, baseplate(s), and colored pixel squares.
thingiverse
free
GKR Baseplates by Cheezoid
...health of a unit to be displayed on their baseplates rather than unit cards, making it more visible to other players at a glance.
thingiverse
free
Garmin Baseplate
...ension large enough for a single track bolt with a small knob. attach garmin mount to base plate using three sheet metal screws.
thingiverse
free
Baseplate by AlpinerBergen
...www.thingiverse.com/thing:96378
to be printed with 100% fill, 3 shells, 0,1mm filament layer height, without raft or supports.
thingiverse
free
Toy horse baseplate
...toy horse baseplate
thingiverse
because it's not standing on it's own, i've added a baseplate.
thingiverse
free
Magpul GL9 baseplate by OmegaInvader115
...magpul gl9 baseplate by omegainvader115
thingiverse
simple baseplate for a magpul glock mag i designed
thingiverse
free
Reviung41 Baseplate by midknight8008
... adapted the baseplate from the available cnc pattern. this design is 5mm thick and features recessed openings for the m2 screws
Airsoft
turbosquid
$25
Mask Airsoft
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$2
Airsoft Tomahawk
...irsoft tomahawk for download as 3ds, obj, fbx, blend, and stl on turbosquid: 3d models for games, architecture, videos. (1145041)
turbosquid
$4
Extension Barrel for Airsoft Gun
...model extension barrel for download as max, obj, fbx, and stl on turbosquid: 3d models for games, architecture, videos. (1239268)
3d_export
$30
Gunsights
...trijicon rmr type, trijicon bac acog 4x32, aim m2 airsoft x2, vortex optics spr 1303 spitfire all models polygons...
thingiverse
free
AIRSOFT by Mr_akil
...airsoft by mr_akil
thingiverse
airsoft
thingiverse
free
Flashhider Airsoft
...flashhider airsoft
thingiverse
airsoft m4 flashhider
mounted @ my ares amoeba 008
thingiverse
free
Airsoft Suppressor by KevinIhle
...airsoft suppressor by kevinihle
thingiverse
airsoft suppressor
thingiverse
free
airsoft suppressor by jordan250
...airsoft suppressor by jordan250
thingiverse
airsoft suppressor
thingiverse
free
Airsoft Silencer by UKnights
...airsoft silencer by uknights
thingiverse
airsoft silencer
thingiverse
free
Airsoft suppresor by 3dpoplauki
...airsoft suppresor by 3dpoplauki
thingiverse
airsoft suppresor rings
Magazine
archibase_planet
free
Magazines
...ibase planet
magazine journal periodical magazines
magazines dual n200111 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Magazines
...magazines
archibase planet
magazine periodical journal
magazines - 3d model for interior 3d visualization.
3d_ocean
$5
3d magazine
...3d magazine
3docean
3d magazine book journal magazine newspaper
3d magazine model.
turbosquid
$2
magazines
...rbosquid
royalty free 3d model magazines for download as c4d on turbosquid: 3d models for games, architecture, videos. (1264164)
3d_export
$5
Magazine stand
...magazine stand
3dexport
magazine stand
3d_export
$5
magazine stand
...magazine stand
3dexport
magazine stand
3ddd
$1
Stool Magazine
...stool magazine
3ddd
stool magazine дизайнерское кресло
turbosquid
$10
magazine
...3d model magazine for download as max, max, max, fbx, and max on turbosquid: 3d models for games, architecture, videos. (1691943)
turbosquid
$2
Magazine
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
archive3d
free
Magazines 3D Model
...magazine periodical journal
magazines n160212 - 3d model (*.3ds) for interior 3d visualization.