Thingiverse
KRusher 1.9 Beadlock Wheels
by Thingiverse
Last crawled date: 5 years, 9 months ago
My first set of RC wheels.
These are a beadlock design. These have a 12mm hex adapter.
These are designed so you can print the rear portion of the wheel in a different color, giving the spokes a different color border. I printed mine at .16 layer height, using 1mm supports. If you go any bigger on the supports you will have areas that do not get supported in some software. Bolt together with M2 x 6mm self tapping screws. Make sure to get allen head cap screws.
Please let me know what you think, and please share your makes here so we can see them on your crawlers!
Many more designs to come.
These are a beadlock design. These have a 12mm hex adapter.
These are designed so you can print the rear portion of the wheel in a different color, giving the spokes a different color border. I printed mine at .16 layer height, using 1mm supports. If you go any bigger on the supports you will have areas that do not get supported in some software. Bolt together with M2 x 6mm self tapping screws. Make sure to get allen head cap screws.
Please let me know what you think, and please share your makes here so we can see them on your crawlers!
Many more designs to come.