GrabCAD
Kretecek
by GrabCAD
Last crawled date: 1 year, 11 months ago
Kretecek - (Mole in Czech) is a lunar surface digger designed to collect loose regolith sediment. It is a simplistic design which limits the number of part maximising amount of collected material. The inner drum is not rotating with respect to the outer collecting part. Each revolution of the outer rim is collecting loose material to the inner drum. Once the inner drum is full it can be rotated and the process is reversed emptying the drum.
It can collect up to 33l of material.
It can collect up to 33l of material.
Similar models
grabcad
free
NASA Advanced Surface Systems Operation Robot Bucket Drum Design
...e side. when the rotation inverts the inner shaft deposes the soil outside to the outer drum, and the outer drum exports the mud.
grabcad
free
NASA RASSOR DRUM Entry
...ximum diameter of the drum is 422 millimeters. the inner drum holds a volume of 19.93 liters. my calculated fill ratio was 75.2%.
grabcad
free
verthon
...e. this design allows for horizontal or vertical position. the materials are plastic because they are lightweight and economical.
grabcad
free
Tumbling drum
...terial. tumbling is designed to improve the quality of the surfaces of parts in a rotating drum with the addition of an abrasive.
grabcad
free
2p ring
...2p ring
grabcad
2 parts ring with outer part rotating over inner part
grabcad
free
Part 5 - Outer Bearing
...s of bearings, but the principle is the same, namely so that the inner race can rotate against the outer race in a smooth manner.
grabcad
free
RASSOR bucket drum
... cylinder can fill up to 100% capacity. rotating the outer shell in the opposite direction will then release the regolith inside.
grabcad
free
Rassor
...s effesien used for mining in outer space, the system used is the mortar mixing system. this drum rassor uses horizontal rotation
grabcad
free
Rassor Bucket drum design NASA CHALLENGE
...ops and holds it in the drums , reversing the rotation ,the material exits out the sides
steve deering inventor, parts designer
grabcad
free
Trapezoidal Drum
...e is no moving part inside or outside except the entire drum itself which rotates.
please, do read the file conceptual_draft.pdf.