Kreg pocket holes and screwheads v2014, which Glue to Any Face, and Cut Opening

Last crawled date: 10 months, 3 weeks ago

This component contains separate Kreg pocket hole components, one for each of eight finished size board thicknesses. Board thicknesses range from 19mm to 44mm (almost exactly 3/4' to 1 3/4'). Open or import the component, and explode one or more times until each pocket hole is a separate component. Each component contains a Kreg pocket hole, and a low poly 3D Kreg screw head, but no screw shanks. They will *Glue to Any* face, and *Cut Opening* when placed in the face of a board (one opened for editing). NOTE: To use, open a board for editing, and drag one of the components from the Component Browser into the board, placing its origin (marked by a guide point) on the edge of the board. It will glue to the face over which the cursor is hovering when you click to complete the insertion. You need to be careful not to move so far from the edge as to lose the Edge inference. Rotate about the guide point, in the plane of the board surface, to align the hole correctly if necessary.