Thingiverse
Kort Nozzle by UpTime
by Thingiverse
Last crawled date: 3 years, 4 months ago
This is a Kort nozzle for RC model boating. It is designed for a Dumas 1.5-in. propeller.
ABS filament was used.
It uses a 1/8" control rod above the nozzle and a stabilizing rod at the bottom. The top of the nozzle is marked with a small T and inside is a notch to prevent the nozzle from spinning on the control rod. I found that there was still too much play in the control rod, so I drilled a small hole through the nozzle control sleeve and the control rod then inserted a small (1/16") wire through the holes.
ABS filament was used.
It uses a 1/8" control rod above the nozzle and a stabilizing rod at the bottom. The top of the nozzle is marked with a small T and inside is a notch to prevent the nozzle from spinning on the control rod. I found that there was still too much play in the control rod, so I drilled a small hole through the nozzle control sleeve and the control rod then inserted a small (1/16") wire through the holes.
Similar models
thingiverse
free
1/4" retaining clip by crossthread
...
a small 1/4" retaining clip.
a 1/4" rod fits perfectly through skate bearings. i used them to build my spool holder.
thingiverse
free
Hypercube Evolution 12mm Y axis mounts by xHOBOPHOBIAx
...t instead of insert. new hole location does not allow for insert to be used.
added a small hole version with a smaller rod hole.
thingiverse
free
1" Dowel Rod wall mounts by ahusmc2146
...l mounts by ahusmc2146
thingiverse
simple 1" replacement dowel rod wall mounts. 1/4" center through hole for mounting.
thingiverse
free
Rod End 1/2" Female Thread with 1/2" Through Hole on Ball
...1/2" female thread with 1/2" through hole on ball
thingiverse
female rod end for checking swivel clearance or fitment.
thingiverse
free
ROV Kort Nozzle for Bilge Pump Thruster w/Integrated Mount. by sthone
...hed it yet but thought i'd share anyway.
for a mate compatible version of this see https://www.thingiverse.com/thing:2854024
cults
free
ROV Kort Nozzle for Bilge Pump Thruster
...rov kort nozzle for bilge pump thruster
cults
rov kort nozzle for bilge pump thruster
rov kort nozzle for bilge pump thruster
thingiverse
free
Filament Shelf
...ooden dowel
i used 1.25" dowel, you could also use conduit if you wanted. i figured that this would flex less than 1".
thingiverse
free
3/8" 1/6 TPI rod end spherical ball link (1/4" ball hole) by Thirtybird
...s onto right hand thread rods and has left hand threads for when a turnbuckle rod with both rh & lh threads is not available.
thingiverse
free
CPAP OXY Nozzle by KVardeman
...nozzle through the hose fitting drop it into the hole and push until nozzle base is flush with the back of the hose fitting wall.
thingiverse
free
Filament Spool Bracket by gspence
...with a screw. can work with dowel rods or just about anything else. i'm using a 12mm carbon fiber tube i had laying around.
Uptime
3d_export
$60
CyberPower UT1000E UPS
...life. it is optimized to help businesses achieve application uptime goals for power outages and comes with automatic voltage...
thingiverse
free
Workmate Clamp by UpTime
...a replacement for a workmate bench clamp. when my 30+ year old clamp broke, i needed a replacement. this replica turned out well.
thingiverse
free
Check Valve by UpTime
...igned for a 3/8" hose. i use two of them in combination with a squeeze bulb to move water (from the boat bilge to a bucket).
thingiverse
free
Decorative Hook by UpTime
...photo, a pair of hooks holds up a classic fishing rod. the top of the hook is smooth and flat, the bottom is shaped for strength.
thingiverse
free
LED Landscape Replacement Light by UpTime
...thingiverse
this is a socket to accept a 12-volt led landscape light for use in place of a 12-volt incandescent landscape light.
thingiverse
free
AA Battery Holder for 6 volts by UpTime
...aa battery holder for 6 volts by uptime
thingiverse
this is a battery holder to deliver 6v by linking 4 aa batteries in series.
thingiverse
free
Fountain Nozzle with 5 Streams by UpTime
...verse
this is a nozzle that can be slipped on to 1/2" pvc pipe. it produces an nice 5-stream spray of water in a fountain.
thingiverse
free
Cup Holder for EPIRB Mount by UpTime
... a cup holder bracket that attaches to the old base. uptime is the name of my boat, so you may need to remix the cup holder part.
thingiverse
free
Zipper Pull by UpTime
....6 mm at the outer edge of the closed zipper). i could not find a replacement at the local fabric store or at a boat canvas shop.
thingiverse
free
Brush Handle Extender by UpTime
...her. in this case, i wanted to be able to remove sticky spider egg cases from the high eaves of the house. it works like a charm.
Kort
3ddd
free
Korting HGG 985 CTW
...rting , варочная панель
в архиве есть вся необходимая документация к данной поверхности.
3dbaza
$6
Korting washer and dryer (336370)
...two color options. you can choose any color that suits you or swap colors.<br>thank you for choosing my model! happy using!
3d_sky
free
Korting HGG 985 CTW
...korting hgg 985 ctw
3dsky
hob
the archive has all the necessary documentation to the surface.
thingiverse
free
Minnkota Endura Kort Nozzle by tamas
...
two mounting ring parts
two times the outer ring part
one middle ring
and eight blades
put it together using m6 stainless bolts.
thingiverse
free
ROV Kort Nozzle for Bilge Pump Thruster by sthone
... it too.
this nozzle was specifically design to work with a 3 blade 50mm robbe boat propeller using an adapter with these specs.
thingiverse
free
ROV Kort Nozzle for Bilge Pump Thruster w/Integrated Mount. by sthone
...hed it yet but thought i'd share anyway.
for a mate compatible version of this see https://www.thingiverse.com/thing:2854024
thingiverse
free
Kort Nozzle with MARIN 37 profile by ttsalo
...ile is maritime research institute netherlands (marin) no. 37, which sacrifices some forwards thrust for better backwards thrust.
thingiverse
free
Kort nozzle for 50 mm propeller by George_JK
... deformed and i remodeled the rudder base to a better shape, i think. i leave here also the uncut body, if it would be preffered.
thingiverse
free
MATE Compatible ROV Kort Nozzle for Bilge Pump Thruster by sthone
...ures) to test fitment. i have not tested the actual thrusters so i'm not sure if these modifications will affect performance.
Nozzle
3d_export
$5
nozzle
...nozzle
3dexport
3d_export
$49
fuel nozzles
...fuel nozzles
3dexport
fuel nozzles 3d model. include max, obj, fbx files.
archive3d
free
Nozzle 3D Model
...archive3d
nozzle hair-drier ware
nozzle - 3d model (*.gsm+*.3ds) for interior 3d visualization.
turbosquid
$25
Pirouette Nozzle
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
Fuel Nozzle
...model fuel nozzle for download as c4d, fbx, obj, 3ds, and stl on turbosquid: 3d models for games, architecture, videos. (1672732)
turbosquid
$8
Aeration Nozzles
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$10
laval airjet nozzle
...laval airjet nozzle
3dexport
a simple modified laval nozzle (airjet shooter) for sorting purposes.
3d_export
$36
Gas nozzle 3D Model
... 3d model
3dexport
gas pump nozzle dispenser filling station petrol fuel spout tank gun
gas nozzle 3d model tartino 1945 3dexport
turbosquid
$10
Diecast Jet nozzle
... free 3d model diecast jet nozzle for download as obj and stl on turbosquid: 3d models for games, architecture, videos. (1425990)
turbosquid
$39
Rocket nozzle, supressor.
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.