Thingiverse
Korg Poly61 Poly 800 Bender Axis
by Thingiverse
Last crawled date: 5 years, 8 months ago
This is the center part of the Korg bender that breaks at the end and is annoying and hard to find when you need one. No more!
You may need to sand the end pins for roundness, and you will likely have to drill or heat press the pins in that hold the lever. I made them too small to keep the fit snug.
To install, it is best to remove the pot that holds the grooved end of this part by bending the tabs.
Sharing is ok, but no commercial resale please. If you're a technician using this as a service, please only charge a fair price for your material and time, and be upfront with your customer.
If you don't have access to a 3D printer, make friends with your local makerspace, or you can utilize one of the many online 3D print services.
You may need to sand the end pins for roundness, and you will likely have to drill or heat press the pins in that hold the lever. I made them too small to keep the fit snug.
To install, it is best to remove the pot that holds the grooved end of this part by bending the tabs.
Sharing is ok, but no commercial resale please. If you're a technician using this as a service, please only charge a fair price for your material and time, and be upfront with your customer.
If you don't have access to a 3D printer, make friends with your local makerspace, or you can utilize one of the many online 3D print services.