Thingiverse
Konghead track link by jonamiki
by Thingiverse
Last crawled date: 4 years, 10 months ago
Catepillar / tank tracks for the Tamiya Konghead 6x6. Based on a heavily modified version of the design "Copy of Copy of starting point for tracks" found on Thingiverse here:https://www.tinkercad.com/things/1rrQgXL5KSb-copy-of-copy-of-starting-point-for-tracks
Print 24 links per track (48 total)
Track links are held together with straightened-out paperclips
Edges sealed with melted filament to keep each paperclip fixed inside the tracks
Note: The body of the Konghead will hit the tracks if not lifted. Increase the height of the body mounts to avoid this.
Print 24 links per track (48 total)
Track links are held together with straightened-out paperclips
Edges sealed with melted filament to keep each paperclip fixed inside the tracks
Note: The body of the Konghead will hit the tracks if not lifted. Increase the height of the body mounts to avoid this.