Thingiverse
Knob with Cap Screw for music stand by zapdawg
by Thingiverse
Last crawled date: 4 years, 1 month ago
Several Music stands at church had stripped out threads and the bolts could not be replaced without destroying the knob. As you can see I have made this one with a replaceable cap crew in it. I have included Home Depot part numbers
If you cant see pictures then:
Everbilt Cap screw M6-1.0 x 50mm no. 887480015188
Everbilt Hex Nut M6-1.0 only needed if original nut is stripped too. no. 887480037586
I finished the build by using a 15/64 drill bit on the hole and a wood chisel on the hex head. I wanted it tight so made it slightly smaller.
This was designed in AutoDesk 123D Design
B-)
If you cant see pictures then:
Everbilt Cap screw M6-1.0 x 50mm no. 887480015188
Everbilt Hex Nut M6-1.0 only needed if original nut is stripped too. no. 887480037586
I finished the build by using a 15/64 drill bit on the hole and a wood chisel on the hex head. I wanted it tight so made it slightly smaller.
This was designed in AutoDesk 123D Design
B-)