Knife Sharpening Machine 4 Stone with oil/water bath 3d model
Warning. This content is not moderated and could be offensive.
splash
3dmdb logo
Thingiverse
Knife Sharpening Machine 4 Stone with oil/water bath

Knife Sharpening Machine 4 Stone with oil/water bath

by Thingiverse
Last crawled date: 4 years, 2 months ago
This is a working miniature copy of a Antique 1934 Sorensen Company Triple Wet Stone Professional Sharpener. My dad was a meat cutter in the 30's and I inherited all his working tools. This was his main one.
a newer/better version can be found here https://www.thingiverse.com/thing:3915463
I reduced the size , added 1 more stone and an angle guide.
The box should be printed 100% infill in order to make it water and oil proof.
You will also need:
2- 5/16" X 2" bolts,washers and nuts
150 mm <12mm X6mm oil stones that you can get here :https://www.google.com/aclk? sa=L&ai=DChcSEwjX4tjBvZvlAhUCn58KHS8bCcMYABANGgJxYg&sig=AOD64_1YLkClcBm2yNGdZaCCnB5zszkp5w&ctype=5&q=&ved=0ahUKEwj96MjBvZvlAhVBheAKHUKYBgcQ9aACCDk&adurl=
I used ABS filament but any kind should work
Its aio unit that need no set to use.
You can see other commercial versions At Norton Company site or Amazon.

Tags