Thingiverse
knife sharpener
by Thingiverse
Last crawled date: 5 years, 8 months ago
you'll need:
2 m8 nuts
1 m8 bolt 30mm (head included)[1" 3/16]
1 m4 screw
1 m8 threaded rod (circa 230 mm)[9 1/16]
a sort of rod from 1mm to 2.5mm (from a welding electrode)
a piece of scrap wood (wedge the rod in the wood)
duble sided tape
sand paper (circa 900 grid)
2 m8 nuts
1 m8 bolt 30mm (head included)[1" 3/16]
1 m4 screw
1 m8 threaded rod (circa 230 mm)[9 1/16]
a sort of rod from 1mm to 2.5mm (from a welding electrode)
a piece of scrap wood (wedge the rod in the wood)
duble sided tape
sand paper (circa 900 grid)