Thingiverse
Knife Jig Guide Bearing by Handi75
by Thingiverse
Last crawled date: 4 years, 3 months ago
Bought me a Sharpening Jig while back and the Guide ball will eventually ware out and will need to be replaced.
So before this happens, I decided to take measurements and make my own so once it wares out I'll just print another, Now not sure how much longer this will replace the original but it will work.
Guide ball is 19mm Diameter with a 6.15mm hole for the guide rod.
So before this happens, I decided to take measurements and make my own so once it wares out I'll just print another, Now not sure how much longer this will replace the original but it will work.
Guide ball is 19mm Diameter with a 6.15mm hole for the guide rod.