Kleiderstange by Daraff

Last crawled date: 2 years, 10 months ago

28mm Kupfer Stange oder VA oder divers
Slicing engine
Slic3r PE 1.4
Layer Height
0.2 mm
First Layer Height
0.25 mm or %
Perimeters (minimum)
3
Generate Extra Perimeters when Needed
Yes
Detect Thin Walls
Yes
Detect Bridging Perimeters
Yes
Number of solid layers on the top
3
Number of solid layers on the bottom
3
Seam Position
Nearest
External Perimeters First
Yes
Fill Density
0.2 0-1 (%)
Fill Pattern
Line
Top/Bottom Fill Pattern
Rectilinear
Combine Infill Every:
1
Solid Infill Every:
0 layers
Fill Angle
45 °
Solid Infill Threshold Area
70 mm2
Only Retract When Crossing Perimeters
Yes
Perimeter Speed
60 mm/s
Speed for Small Perimeters
60 mm/s or %
Speed for External Perimeters
50% mm/s or %
Infill Speed
100 mm/s
Solid Infill Speed
100 mm/s or %
Top Solid Infill Speed
100 mm/s or %
Support Material Speed
50 mm/s
Support Material Interface Speed
100% mm/s or %
Speed for Bridges
60 mm/s
Speed for Gap Fill
40 mm/s
Travel Speed
130 mm/s
First layer speed
30 mm/s or %
Loops
4
Distance from Object
6 mm
Skirt Height
1 layers
Brim Width
0 mm
Overhang threshold
10 °
Enforce support for the first
0 layers
Raft Layers
0 layers
Support pattern
Pillars
Support pattern Spacing
6 mm
Support pattern Angle
0 °
Support Interface Layers
3 layers
Support Interface Pattern Spacing
3 mm
Default Extrusion Width
0.4 mm or %
First Layer Extrusion Width
0.4 mm or %
periExW
0.4 mm or %
External Perimeters Extrusion Width
0.4 mm or %
Bridge Flow Ratio
1 mm
Z Offset
0 mm
Filament Diameter
1.75 mm
Extrusion Multiplier
1.07
Extruder Temperature
197 °C
Extruder Temperature (First Layer)
197 °C
Bed Temperature
60 °C
Bed Temperature (First Layer)
60 °C
Cooling
Yes
Retraction Length
5 mm
Retraction Lift Z
0 mm
Retraction Speed
100 mm/s
Retraction Extra Length on Restart
0 mm
Minimum Travel After Retraction
3 mm
Retraction Extra Length on Restart
0 mm
Spiral Vase
No
Avoid Crossing Perimeters
No
Only Infill Where Needed
No
Infill Before Perimeters
No
Generate Support material
No
Don't Support Bridges
No
Complete Individual Objects
No
Enable Ooze Prevention
No
Keep fan on
No
Retract on Layer change
No
Wipe While retracting
No