Thingiverse
Kitchen/Workshop granule Dispenser - Wall Mounted by EvoLabs
by Thingiverse
Last crawled date: 3 years, 3 months ago
Wall mounted Kitchen/Workshop granule Dispenser with screw top lid for Tea, Coffee, Rice etc. in two hopper sizes: 620ml or 1000ml, with 3 removable cup types (Tap, Teaspoon, Tablespoon).
Not suitable for liquids.
You will need:
PLA or PLA+ Filament (other filament types e.g. PETG may also be suitable but not tested with this model).
0.8mm thick clear acrylic for plastic view window (620ml hopper: 12mm x 95mm, 1000ml hopper: 12mm x 125mm for 1000ml hopper).
4mm or similar sized screws suitable for drilling into your wall OR double sided foam tape suitable for attaching to your wall.
Printer settings
Layers: 3 (Top/Bottom/Perimeter layers)
Infill: 0% for Hopper (rely on wall strength), use 15% for all other parts.
Support: Only required for cups (use 5mm resolution).
Filament: Use PLA or PLA+ (other filament types e.g. PETG may also be suitable but not tested).
Print Orientation: Hopper and lid upside down. Cups with flanges closest to the bed. All other parts flat to the bed.
Plastic view window
Material: 0.8mm thick clear acrylic.
Dimensions: 620ml hopper: 12mm x 95mm, 1000ml hopper: 12mm x 125mm.
Mounting method
4mm or similar sized screws suitable for drilling into your wall OR double sided foam tape suitable for attaching to your wall.
Assembly
Once all parts have been printed, support material removed, and cleaned of debris:
Turn the hopper upside down.
Insert desired cup type (e.g. tap) into the cup hole, so the flange is flush with the gap at the end of the cup hole.
Carefully push a cup retainer ring into the gap - it should lock into place around the cup so that the cup can rotate 360 degrees without coming out. If you want to swap to another cup, first use the Cup retainer remover to help push out the retainer ring.
Cut out the plastic view window to size (see above).
Insert the plastic view window into the slot in the top of hopper - make sure to push the plastic past the bottom of the viewing area, otherwise granules will escape.
If storing food granules e.g. coffee, make sure inside of the hopper and the cups are sanitised prior to use.
Screw the lid onto the hopper. Tip: If the lid is tight/jams, use a paper towel to smear a small amount of vegetable oil onto the thread.
Slide the Wall mount all the way down onto the Hopper. Tip: If the mount is tight/jams, use a paper towel to smear a small amount of vegetable oil onto the rails.
Test position the Hopper with it's attached Wall mount where you want to place it, making sure to consider what size cups, containers etc need to be placed under the Hopper. Using a pencil or non-permanent marker, mark on the wall where you want the Wall mount to go.
If you decide to attach the Wall mount to the wall using screws, then place the Wall mount where you marked it and drill the holes. You can also use double sided foam tape or similar to stick the Wall mount in place.
Slide the Hopper onto the Wall mount, ready for use.
Not suitable for liquids.
You will need:
PLA or PLA+ Filament (other filament types e.g. PETG may also be suitable but not tested with this model).
0.8mm thick clear acrylic for plastic view window (620ml hopper: 12mm x 95mm, 1000ml hopper: 12mm x 125mm for 1000ml hopper).
4mm or similar sized screws suitable for drilling into your wall OR double sided foam tape suitable for attaching to your wall.
Printer settings
Layers: 3 (Top/Bottom/Perimeter layers)
Infill: 0% for Hopper (rely on wall strength), use 15% for all other parts.
Support: Only required for cups (use 5mm resolution).
Filament: Use PLA or PLA+ (other filament types e.g. PETG may also be suitable but not tested).
Print Orientation: Hopper and lid upside down. Cups with flanges closest to the bed. All other parts flat to the bed.
Plastic view window
Material: 0.8mm thick clear acrylic.
Dimensions: 620ml hopper: 12mm x 95mm, 1000ml hopper: 12mm x 125mm.
Mounting method
4mm or similar sized screws suitable for drilling into your wall OR double sided foam tape suitable for attaching to your wall.
Assembly
Once all parts have been printed, support material removed, and cleaned of debris:
Turn the hopper upside down.
Insert desired cup type (e.g. tap) into the cup hole, so the flange is flush with the gap at the end of the cup hole.
Carefully push a cup retainer ring into the gap - it should lock into place around the cup so that the cup can rotate 360 degrees without coming out. If you want to swap to another cup, first use the Cup retainer remover to help push out the retainer ring.
Cut out the plastic view window to size (see above).
Insert the plastic view window into the slot in the top of hopper - make sure to push the plastic past the bottom of the viewing area, otherwise granules will escape.
If storing food granules e.g. coffee, make sure inside of the hopper and the cups are sanitised prior to use.
Screw the lid onto the hopper. Tip: If the lid is tight/jams, use a paper towel to smear a small amount of vegetable oil onto the thread.
Slide the Wall mount all the way down onto the Hopper. Tip: If the mount is tight/jams, use a paper towel to smear a small amount of vegetable oil onto the rails.
Test position the Hopper with it's attached Wall mount where you want to place it, making sure to consider what size cups, containers etc need to be placed under the Hopper. Using a pencil or non-permanent marker, mark on the wall where you want the Wall mount to go.
If you decide to attach the Wall mount to the wall using screws, then place the Wall mount where you marked it and drill the holes. You can also use double sided foam tape or similar to stick the Wall mount in place.
Slide the Hopper onto the Wall mount, ready for use.
Similar models
thingiverse
free
Kitchen/Workshop granule Dispenser - Stand alone by EvoLabs
...e lid onto the hopper. tip: if the lid is tight/jams, use a paper towel to smear a small amount of vegetable oil onto the thread.
thingiverse
free
whoop canopy 14x14mm use foam tape to stick on fc
...se sewing thread to tie camera to the canopy. after you trimmed it down. it weights about 0.5g + 1.3g nano 3 + 1g vtx = about 3g.
thingiverse
free
Simple light-duty wall hook by Mich_K
...attach to the wall using double-sides foam tape (as pictured), and one with 2x countersunk #6 screw holes for mounting onto wood.
cg_trader
$3
Minimalist Pen Holder | 3D
...sing double-sided tape, you can also, because on the back there is enough area to be used as a place to attach double-sided tape.
thingiverse
free
Suction cup webcam mount by vogon_poetry
...
this design uses an m2/m3 screw (if you drill it out), a suction cup, and a bit of tape/3m mounting foam to attach the webcam.
thingiverse
free
TTGO T-Beam - Window/Wall Suction Cup case by kohkoh
...ce of suction cups, if you wanted to attach this to brick/wood.
suction cups used: https://www.amazon.co.uk/gp/product/b076zm9hgw
thingiverse
free
Wall mounted stick holder for filament spool by Shange
...le to attach the stick in place on the holder.
size: 20.0 x 45.0 x 20.9 mm
material used: 4 g
print time: 28 minutes with anet a6
thingiverse
free
Xiaomi Aqara Mount by robofly
...e tape does not stick on all surfaces e.g. rough wood or concrete. with this mount you can attach the sensor with a single screw.
thingiverse
free
Asus Lyra Trio - Wall mount by Calvin_MegaZero
...ich you can hook the device and have it flush against the wall.
can also be used for other devices, but have not tested that yet.
thingiverse
free
Simple Camera Mount by JeremyLaurenson
...w the print bed and at its simplest, you can just use double-sided tape or hot glue to attach your camera, or remix with a mount.
Evolabs
thingiverse
free
Story Point Cards Holder by EvoLabs
... holder to store story point cards used in the agile methodology for estimating effort. this model allows for a total of 8 decks.
thingiverse
free
Sheet resistance measurement block by EvoLabs
...sistance measurement block that uses 1.25mm adhesive copper foil contacts and suitable for multi-meters with standard 2mm probes.
thingiverse
free
2020 to 2040 Profile Jig by EvoLabs
... 3mm x 30mm bolts with t-slot nuts.
useful if you have spare 2020 profile lengths available but don't want to purchase 2040.
thingiverse
free
CF 28-05 Brushless Outrunner 1600Kv by EvoLabs
...ng/store/__5482__cf_28_05_brushless_outrunner_1600kv.html
i used this design as part of modelling a mini-flying wing motor mount.
thingiverse
free
Durafly™ HyperBipe undercarriage support wall by EvoLabs
...support wall helps to resist the foam compression.
features a chamfered edge to help insert the support wall into the epo foam.
thingiverse
free
P-51D (Eleven Hobby) Replacement Spinner by EvoLabs
... aok in numerous flights.
see: https://www.banggood.com/eleven-hobby-p-51d-mustang-old-crow-1100mm-43-wingspan-pnp-p-1055824.html
thingiverse
free
Smartphone microscope by EvoLabs
...cal size torch! see: http://www.thewarehouse.co.nz/red/catalog/product/necessities-brand-9-led-torch-assorted-colours?sku=1889844
thingiverse
free
Smaller hub for Kiwi3D.co.nz 1KG refill coil Master spool outer (V2) by EvoLabs
... or impossible to fit over the hub of the master spool. this remix provides a smaller hub diameter to enable fitting of the coil.
thingiverse
free
2020 T-Slot brackets for 20mm conduit by EvoLabs
... infill for maximum strength. after months of use the dimensions combined with the use of petg have proven to be quite resilient.
thingiverse
free
Kitchen/Workshop granule Dispenser - Stand alone by EvoLabs
...e lid onto the hopper. tip: if the lid is tight/jams, use a paper towel to smear a small amount of vegetable oil onto the thread.
Granule
3d_export
$5
Chocolate Granules
...ad our <br>. you will received:<br>- 1 objects<br>- jpg (2000 x 2000px)<br>- obj file<br>- mtl file
3d_export
$15
double sealed packaging machine bag type granule medicine sealing packaging machine
...aging bag knurling seal. can also be used for other such as food, daily necessities packaging, like welcome to download learning.
3d_ocean
$5
Cup of Coffee
...object plate spoon a cup of cofee with choco granule with spoon on the other...
3d_ocean
$10
Groats Grains Surface Textures
...brown rice buckwheat cereals corn crops design food grains granule groats kernel kitchen loose macro millet natural nature organic...
3d_export
$29
sachet packing machine
...some product for example suger ,salt , powder , granule, … we designed this machine in our factory ,...
3d_export
$6
ottoman shark
...can be easily removed for cleaning, washing or adding granule of...
3d_export
$20
9KH30 Ring die pellet machine
...improve the digestion and absorption of nutrients. 5. the granule formation process can denature the pancreatic enzyme resistance factor...
thingiverse
free
Micro Granule Dispenser by entomophile
...icator designed for delivering mosquito control granules from a drone. designed for a hitec hs-85bb servo and 10 ml sample vial.
thingiverse
free
Krmitko na granule pro kocku by nobomi
...krmitko na granule pro kocku by nobomi
thingiverse
thingiverse
free
Granules in OpenScad by WilliamAAdams
...ally in the library as yet. i'm trying to figure out tweaks to make it not quite so resource intensive. but, it looks good!
Workshop
turbosquid
$49
Workshop
...p
turbosquid
royalty free 3d model workshop for download as on turbosquid: 3d models for games, architecture, videos. (1195541)
3d_export
free
artoon workshop
...artoon workshop
3dexport
сartoon workshop<br>low poly car workshop building model
turbosquid
free
workshop
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$65
workshop
...workshop
3dexport
simple rendering of the scene file
3d_export
$65
Workshop
...workshop
3dexport
simple rendering of the scene file
3d_export
$25
workshop
...workshop
3dexport
simple rendering of the scene file
3d_export
$15
workshop
...workshop
3dexport
simple rendering of the scene file
3ddd
$1
Nowodvorski WORKSHOP
... workshop
nowodvorski workshop
бра и подвесной светильник.
d 90mm
h 450mm
материалы vray, corona.
design_connected
$16
Workshop Lamp
...workshop lamp
designconnected
hk living workshop lamp computer generated 3d model.
3ddd
$1
Workshop, Browning
...workshop, browning
3ddd
sofa workshop
http://www.sofaworkshop.com/sofas/fabric-sofas/sofa/browning
Dispenser
archibase_planet
free
Dispenser
...dispenser
archibase planet
soap dispenser sanitary ware
soap dispenser - 3d model for interior 3d visualization.
archibase_planet
free
Dispenser
...dispenser
archibase planet
toilet paper dispenser sanitary ware
toilet paper dispenser - 3d model for interior 3d visualization.
archibase_planet
free
Dispenser
...hibase planet
dispenser water cooler cooler water
dispenser n040815 - 3d model (*.gsm+*.3ds+*.max) for interior 3d visualization.
3d_export
$10
soap dispenser
...soap dispenser
3dexport
soap liquid dispenser for top.
3ddd
$1
soda dispenser
...soda dispenser
3ddd
бар , кафе
soda dispenser
turbosquid
$5
dispenser
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_ocean
$12
Water Dispenser
...dispenser furnishings lowpoly water
this is a water dispenser hot water for tea is winter and summer is cold for souls. have fun!
archive3d
free
Dispenser 3D Model
...aper towel dispenser mediclinics n280116 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archive3d
free
Dispenser 3D Model
...ater t6 purifier water dispenser n260216 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$5
Soap dispenser
...ser
3dexport
soap dispenser for your bathroom interior design<br>include:<br>- pbr-materials<br>- 2 dispensers
Kitchen
3d_ocean
$29
Kitchen
...tchen interior kitchen interior rendering kitchen rendering
kitchen interior,kitchen,kitchen rendering,kitchen interior rendering
archibase_planet
free
Kitchen
...net
kitchen kitchen furniture kitchen table kitchen cabinet
kitchen table - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Kitchen
...kitchen
archibase planet
kitchen kitchen cabinet kitchen furniture
kitchen - 3d model (*.3ds) for interior 3d visualization.
archibase_planet
free
Kitchen
...kitchen
archibase planet
kitchen furniture kitchen cabinet kitchen equipment
kitchen - 3d model for interior 3d visualization.
archibase_planet
free
Kitchen
...itchen
archibase planet
kitchen kitchen cabinet kitchen furniture
kitchen - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Kitchen
...chen
archibase planet
kitchen kitchen cabinet kitchen furniture
kitchen n020315 - 3d model (*.3ds) for interior 3d visualization.
archibase_planet
free
Kitchen
...itchen
archibase planet
kitchen kitchen cabinet kitchen furniture
kitchen - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Kitchen
...itchen
archibase planet
kitchen kitchen furniture kitchen cabinet
kitchen - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Kitchen
...kitchen
archibase planet
kitchen kitchen furniture kitchen table
kitchen - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Kitchen
...itchen
archibase planet
kitchen kitchen furniture kitchen cabinet
kitchen - 3d model (*.gsm+*.3ds) for interior 3d visualization.
Wall
turbosquid
$5
Wall and UDK Wall
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
archibase_planet
free
Wall
...wall
archibase planet
batten wall plywood partition
batten wall - 3d model for interior 3d visualization.
3d_ocean
$5
Wall
...wall
3docean
low polgon wall low stone old wall stone wall
2048*2048 tex obj,fbx,blend format. low polygon. game ready.
3ddd
$1
wall
...wall
3ddd
камень , кладка
damaged stone wall
3d_export
$5
wall
...wall
3dexport
room with a wall with doors made of wood and leather
3ddd
$1
WALL FREAMS
...wall freams
3ddd
wall freams
wall freams
3ddd
$1
WALL-E
...wall-e
3ddd
wall-e , робот
wall-e
3ddd
$1
WALL PANNEL
...wall pannel
3ddd
панель
wall pannel for enterance wall.
3d_export
$18
great wall-city wall-dianjiangtai
...great wall-city wall-dianjiangtai
3dexport
great wall-city wall-dianjiangtai<br>3ds max 2015
turbosquid
$5
Wall
...wall
turbosquid
royalty free 3d model wall for download as on turbosquid: 3d models for games, architecture, videos. (1522889)
Mounted
3d_export
free
mounting bracket
...mounting plate is the portion of a hinge that attaches to the wood. mounting plates can be used indoors, cabinetry and furniture.
turbosquid
$2
MOUNTING
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Mounts
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Mount Fuji
...fuji
turbosquid
free 3d model mount fuji for download as obj on turbosquid: 3d models for games, architecture, videos. (1579977)
3d_export
$5
Headphone mount LR
...headphone mount lr
3dexport
headphone mount l+r
turbosquid
$39
Mount rainier
...quid
royalty free 3d model mount rainier for download as fbx on turbosquid: 3d models for games, architecture, videos. (1492586)
turbosquid
$5
pipe mounting
...quid
royalty free 3d model pipe mounting for download as obj on turbosquid: 3d models for games, architecture, videos. (1293744)
turbosquid
$3
Mounting Tires
...uid
royalty free 3d model mounting tires for download as fbx on turbosquid: 3d models for games, architecture, videos. (1708511)
3d_export
$5
Magnetic GoPro Mount
...pro mount
3dexport
cool magnetic mount for gopro. allows you to mount the camera on flat metal surfaces and get exclusive shots.
turbosquid
$5
Stone Mount
...ty free 3d model stone mount for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1370306)