Thingiverse
Kitchen compost mounting bracket by berserkerscientist
by Thingiverse
Last crawled date: 4 years, 10 months ago
Mounting bracket for under-the-sink compost bin. My bin is 104mm between the notches on the back. I attached it to the cupboard door using two Command(TM) strips, but any adhesive would work. (I guess I could have put screw holes in it.)
Print vertical. Probably a good idea to make it solid, but I made it with 10% infill and its working fine. Printed on my Prusa Mini+ using Hatchbox Wood filament.
UPDATE 2021-06-14: My cupboard is very smooth, so unfortunately the Command strips (or even Gorilla Glue) won't keep the bracket attached. I'm going to have to redesign with screw holes.
Print vertical. Probably a good idea to make it solid, but I made it with 10% infill and its working fine. Printed on my Prusa Mini+ using Hatchbox Wood filament.
UPDATE 2021-06-14: My cupboard is very smooth, so unfortunately the Command strips (or even Gorilla Glue) won't keep the bracket attached. I'm going to have to redesign with screw holes.