Thingiverse
![KISSophane](/previews/4777446.jpg)
KISSophane
by Thingiverse
Last crawled date: 4 years, 4 months ago
This i a KISS themed lithophane lamp. I used https://lithophanemaker.com/ to design the lithophane parts, the base and top i designed in tinkercad. For the led light i picked up one of these ( https://www.amazon.co.uk/DSYJ-Round-Magnetic-Integral-Magnet/dp/B00LN3FNKK ) round flashlights from the local dollar store and gutted it. I used the led, the switch and the battery terminals from it. I printed the lithophane parts with glow in the dark pla at 100% infill. The base and top i printed with standard pla at 25% infill with supports at 80 degrees overhang. The battery tray i printed out of petg at 100% infill with supports at 50 degrees overhang (pla can be used for the battery tray). The feet are optional, i printed them out of TPU at 40% infill. I glued the top, body, base and battery tray together with clear epoxy. I trimed and put the battery terminals into the battery tray then soldered it to the led and the switch (you will need some soldering skills to make this). I used the screws from the flashlight i gutted to attach the bottom plate and the battery door.
Similar models
thingiverse
free
![Nightmare before christmas lithophane](/t/4765153.jpg)
Nightmare before christmas lithophane
...ws from the flashlight i gutted to attach the bottom plate and the battery door. at some point i might make the base more ornate.
thingiverse
free
![Unicorn Snow Queen Litho Base by tslater2006](/t/8083574.jpg)
Unicorn Snow Queen Litho Base by tslater2006
..., depending on filament. you'd also need to print it at 100% infill or 999 perimeters at least for that section of the model.
thingiverse
free
![CZ 75 Magazine Base Pad by pgote](/t/8864278.jpg)
CZ 75 Magazine Base Pad by pgote
...ad for cz 75 magazines. the stl contains print support for the overhangs. i'm printing it in pla with a high degree of infill
thingiverse
free
![A-10 Thunderbolt by atamerica](/t/8688097.jpg)
A-10 Thunderbolt by atamerica
...tern : zigzag
support density : 15%
use tower (check)
build plate adhesion : none
back part : no need support.
infill : 100%
pla.
thingiverse
free
![Ryobi 40V Battery Base by willtan930](/t/9683349.jpg)
Ryobi 40V Battery Base by willtan930
... to go through. (my original design had a hole built in but the supports it added through the hole made removal more difficult.)
thingiverse
free
![Throwie by AlbyAlby](/t/9062867.jpg)
Throwie by AlbyAlby
...d to a reed switch and connected to a coin cell battery, so that when you put a magnet near the reed switch the led it lights up.
thingiverse
free
![Curved Lithophane Case with 9V Battery Compartment by dstasiak](/t/8597986.jpg)
Curved Lithophane Case with 9V Battery Compartment by dstasiak
...ostbabu and included it into the case since you can change the battery by opening the picture front.
!! update... v2 works great!
thingiverse
free
![Milwaukee M12 lantern/torch by ksuszka](/t/8540317.jpg)
Milwaukee M12 lantern/torch by ksuszka
...led strip with dc-dc step-up converter. there should be plenty of space inside the led strip holder to put such converter inside.
thingiverse
free
![Tealight Lithophane Base by Jelzic](/t/8523246.jpg)
Tealight Lithophane Base by Jelzic
...nes)
used this tealight from amazon:https://www.amazon.com/gp/product/b01j5eeeqw/ref=oh_aui_detailpage_o08_s00?ie=utf8&psc=1
thingiverse
free
![Lithophanes G9 LED Lamp Base by Seelenkind](/t/9252851.jpg)
Lithophanes G9 LED Lamp Base by Seelenkind
...r. solder the power cable with the switch and hide the connection point in the base.
https://www.tinkercad.com/things/bvhet2k2zka