Thingiverse
Kingroon Spool Holder by diTToS
by Thingiverse
Last crawled date: 3 years, 4 months ago
This is my updated version of the my remixed Kingroon spool holder and filament guide https://www.thingiverse.com/thing:3969208 (which is a remix of a few other pieces). My original design had multiple flaws, but the biggest was the small 20x40 rail insert pins were not strong enough to keep the filament weight from snapping them off in the guide. So I figured I'd change the center of gravity and put the filament directly above the vertical rail. This way the pins no longer are needed for their strength but more for placement. I also shortened the spool arm to try and keep the spool from moving around as much. There are two files, one you can print with the Kingroon, but requires a two piece arm. The other is if you have access to a larger print bed you can keep it to one piece arm. Since this is made for the Kingroon I've printed it as if that's all you have.
Similar models
thingiverse
free
TUSH - A remix of many! by spongybob1958
...spool from jumping sideways off the bearing rails, but allows for spools that have filament to the edge of the spool (see photo).
thingiverse
free
Kingroon Spool Holder Remix
...ll fit a bit snugger.
the original was causing my spools to travel down the holder and put more pressure on the built in t clips
thingiverse
free
TUSH-Spool Holder with Rails (Remix) by jazzcat007
...gonna make the rail symmetrical, because, 'why not?'. then you don't have to worry about which way you glue it down.
thingiverse
free
2020 filament spool holder with 608 bearings by rollinns
...ue or acetone slurry to glue to washer nearest the mounting plate into place to prevent the bearing washer unit from sliding out.
thingiverse
free
REmixed Prusa MK2 Threaded Bearing Spool holder w/filament guide by jterranella
... well as where the nut inserts. if you're planning on printing this out of pla, i would recommend going v2 over the original.
thingiverse
free
PrintrBot 2pc Basic Spool Holder by Cmerritt_319
...l so that the filament is "retained" in the area between the spool of filament and the filament retainer bar.
yer done!
thingiverse
free
Filament Spool holder for extrusion frame (3030) by RilleRick
...he screws are 5,5 mm in diameter
you need to print one filament spool holder and two pins. the bearing to use are two simple 608.
thingiverse
free
TUSH2 - Sliding Positions by spongybob1958
...eing pulled off the tush when the spools get lite or tangled. i usually to be safe use at least one with any spool i'm using.
thingiverse
free
Filament guide for ender 3 V2 by XxR3YxX
...o print the 2 spacers and sleeve for the 608 bearing this mount uses, those pieces are found on the original post i remixed from!
thingiverse
free
1-part spool holder/filament guide for linear rail by cobradane
...r linear rail by cobradane
thingiverse
a one-print spool holder and filament guide that clips onto 20x40mm extruded linear rail.
Dittos
turbosquid
$1
Ditto
...odel ditto for download as 3ds, ige, obj, fbx, blend, and stl on turbosquid: 3d models for games, architecture, videos. (1335980)
3d_export
$10
Ditto 3-tier gap storage cabinet
...xture format: .png .jpg<br>resolution: 1024*1024<br>pbr in substance painter<br>formats: .obj .gltf .fbx .blend
free3d
free
Ditto (Pokemon)
...ditto (pokemon)
free3d
ditto from the pokémon (1st generation)
thingiverse
free
pokemon Ditto by kai6661305
...pokemon ditto by kai6661305
thingiverse
ditto
thingiverse
free
Ditto by iwasthere
...make dito great great again -2017. we need more dittos in this world .papa bless...
thingiverse
free
Ditto cup (Pokemon) by Eldrich3
...ditto cup (pokemon) by eldrich3
thingiverse
my daughter wanted a ditto cup, so i made her a ditto cup.
thingiverse
free
Ditto with eyes by Alfonmc
...ditto with eyes by alfonmc
thingiverse
remake of ditto from alex, zbrushed eyes and mouth - "high poly"
thingiverse
free
Tinkerine Studio Ditto extruder (Original first version of Ditto) by cinosh07
...is is a replacement extruder for 3mm filaments for the original tinkerine studio ditto 3d printer. more to come for instructions.
sketchfab
$10
Ditto (Funko Style)
...!
https://www.instagram.com/blizters_creations/ - ditto (funko style) - buy royalty free 3d model by javier gonzález (@jglezm99)
thingiverse
free
A Ditto by GarrettEvanko
...iction and make something related so i made a very well known pokemon and tried to replicate its shape to the best of my ability.
Kingroon
thingiverse
free
Upgrade set for Kingroon KP3
...upgrade set for kingroon kp3
thingiverse
upgrade set for kingroon kp3
https://youtu.be/tbckazufcrq
thingiverse
free
Fan duct for Kingroon Kp3s by CarvingCup
...fan duct for kingroon kp3s by carvingcup
thingiverse
fan duct for kingroon kp3s
thingiverse
free
Wi-Fi housing Kingroon by Catany
...wi-fi housing kingroon by catany
thingiverse
housing for wi-fi module for kingroon printer
thingiverse
free
KINGROON PK1 FILAMENT HOLDER by pgolos
...kingroon pk1 filament holder by pgolos
thingiverse
replacement for kp1 kingroon more stronger the the one that come with it
thingiverse
free
The fixing of the ultrabase for Kingroon KP3 by N_a_t
...of the ultrabase for kingroon kp3 by n_a_t
thingiverse
the fixing of the ultrabase for kingroon kp3.https://youtu.be/8bem8akk2dw
thingiverse
free
Kingroon KP3S Bettgriff by ErFaLi
... kp3s bettgriff by erfali
thingiverse
einfacher bettgriff für den kingroon kp3s.
benötigt werden:
2x m3 mutter
2x m3x10 schraube
thingiverse
free
Kingroon KP3 Spool Holder by gustus
...kingroon kp3 spool holder by gustus
thingiverse
kingroon kp3 spool holder, 2040 profile support.
support up 1kg.
thingiverse
free
Kingroon KP3s Extruder Knob by Namurei
...fit any other (mk8) extruder, but kingroon needs a bit smaller wheel than other printers.
enjoy and visit me on instagram @namu3d
thingiverse
free
KINGROON KP3S CoolingDuct for Titan-Head by burnsheep
...kingroon kp3s coolingduct for titan-head by burnsheep
thingiverse
this is a cooling duct for kingroon kp3s titan-head.
thingiverse
free
Kingroon KP3 upgrade axis Y by Kirengineer
...kingroon kp3 upgrade axis y by kirengineer
thingiverse
kingroon kp3 upgrade axis y tensioner. m5 screw
Spool
3ddd
$1
spool c53301
...spool c53301
3ddd
spool
spool c53301 650х350х145
turbosquid
$3
Cable Spool
...royalty free 3d model cable spool for download as max and fbx on turbosquid: 3d models for games, architecture, videos. (1457009)
turbosquid
free
Pallets and Spool
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
Spool of String
...ol of string pink for download as c4d, 3ds, fbx, obj, and stl on turbosquid: 3d models for games, architecture, videos. (1647892)
3ddd
$1
Подвесные светильники Spool
...ye/podvesnoy_svetilnik_spool_d320/ http://www.cosmorelax.ru/catalog/podvesnyye/podvesnoy_svetilnik_spool_d420/
3ddd
free
Spool 001 sofa
...spool 001 sofa
3ddd
roda
roda
collection spool
design rodolfo dordoni
dimensions:
lenght 90 cm
depth 94 cm
height 79 cm
turbosquid
$15
Roda Spool Sofa
...ee 3d model roda spool sofa for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1502650)
turbosquid
$95
wire spools 3ds
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
spool of TV wire
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$3
Simple and Fast Spool Holder
...ree 3d model simple and fast spool holder for download as stl on turbosquid: 3d models for games, architecture, videos. (1548546)
Holder
archibase_planet
free
Holder
...holder
archibase planet
holder toilet paper holder
holder paper n070712 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Holder
...e planet
holder rack toilet paper holder
holder toilet roll n240715 - 3d model (*.gsm+*.3ds+*.max) for interior 3d visualization.
archibase_planet
free
Holder
...holder
archibase planet
pen holder support prop
pen holder - 3d model for interior 3d visualization.
archibase_planet
free
Holder
...holder
archibase planet
pole post holder
сhurch cross pole holder - 3d model for interior 3d visualization.
archibase_planet
free
Holder
...holder
archibase planet
holder bathroom ware
shower holder - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Holder
...oilet paper holder
holder paper devon&devon; time black n241113 - 3d model (*.gsm+*.3ds+*.max) for interior 3d visualization.
archibase_planet
free
Holder
...holder
archibase planet
holder hanger hanger for towel
holder 7 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Holder
...holder
archibase planet
holder hanger hanger for towel
holder 3 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Holder
...holder
archibase planet
holder towel rack towel-horse
holder - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Holder
...lder
archibase planet
holder hanger hanger for towel
holder towel n250912 - 3d model (*.gsm+*.3ds) for interior 3d visualization.