Kingroon KP3 Hotend Fan Shroud by AttilaSVK

Last crawled date: 3 years, 5 months ago

If you decide to upgrade your Kingroon KP3 with a separate part cooling fan, and you would like to keep the original hotend cover, which was designed to direct the air partially to cool the print as well, this part is for you.
Once you remove the metal part redirecting the air of the hotend fan to the print, install this shroud which should prevent the print from being cooled by the hotend fan. I have fitted an Ender 5 hotend, which has a larger heatblock, and a sock, so that's what I used as a baseline for the length of the shroud.
Installation is easy, just screw it to the bottom two screws of the hotend fan - don't forget to take off the washers!
Print from ABS or ASA for maximum temperature resistance, although the top will be cooled by the hotend fan.