Thingiverse
Kindle Paperwhite Page Turner Remixed by Eustakhios
by Thingiverse
Last crawled date: 4 years, 10 months ago
A remix of alexmikes Kindle Page Turner. It is a little bit bigger to house the electronics I used inside of it, but still functions the same way.
Changes:
The body of the box was lengthened and widened to allow for my components to fit.
The arm was also adjusted to account for the changes to the design.
I created a tray for the RF receiver board to sit in so that it wouldn't be moving around the enclosure.
I widened out the slot for the micro controller usb access to work with my board and created a raised platform for it to sit on inside the enclosure.
Electronics used:
Parallax Inc. RF Controller - Part Number: 700-10016
Adafruit Industries LLC Servo - Part Number 169
Sparkfun Qduino Mini
One thing that may not be visible from the pictures is, there is a wire running from a ground terminal on the microcontroller board out through the arm, with bare leads wrapped around the base of the stylus nub to allow for the simulated touch.
Changes:
The body of the box was lengthened and widened to allow for my components to fit.
The arm was also adjusted to account for the changes to the design.
I created a tray for the RF receiver board to sit in so that it wouldn't be moving around the enclosure.
I widened out the slot for the micro controller usb access to work with my board and created a raised platform for it to sit on inside the enclosure.
Electronics used:
Parallax Inc. RF Controller - Part Number: 700-10016
Adafruit Industries LLC Servo - Part Number 169
Sparkfun Qduino Mini
One thing that may not be visible from the pictures is, there is a wire running from a ground terminal on the microcontroller board out through the arm, with bare leads wrapped around the base of the stylus nub to allow for the simulated touch.