Thingiverse
Killflash and sun shield for NcStar 3-12x56E by Mattastrophe
by Thingiverse
Last crawled date: 3 years, 1 month ago
This is a combination lens protector, killflash and sunvisor I designed for my NcStar 3-12x56E. The killflash insert pops into the sunshield from the back before it is placed on the scope.
The v5 "outsert" and the 8mm tall insert are the models I would suggest to print. The other inserts are not as effective at eliminating the scope glare, and may have potential to come loose if not glued into the sun shield. The other sun shield ("outsert") models will require some post-processing to fit the scope if the scaling is not perfect. The 8mm tall insert fits best, and has the honeycomb structure throughout the entire height of the model. It has 4mm holes with .48mm walls. I may revise this to .5mm, as it seems some slicers may not print walls these thin if you are using a .4mm nozzle.
The older honeycomb's holes are sized at 5.9mm (in order to allow as much light through as possible while still hopefully stopping airsoft BB's) with a .8mm wall between them.
The square grid pattern views clear, but if your retraction settings aren't perfect, it will have defects. The holes are 3mm with a .4mm wall between them. The square grid doesn't look as cool, but seems to print faster, and with its deeper walls and tighter spacing, seems to be more effective as a killflash. I might re-do or add another honeycomb pattern, later.
I designed this to use inserts so that they could be replaced if broken (as this is primarily for airsoft), if I wanted to change the design, and so that I could avoid having to print with supports.
The v2 "outsert" has very tight tolerances, so test a small portion of the print first to ensure it will fit. The v4 has slightly looser tolerances and a few other cosmetic changes.
v5, the version with the opening for a nut and screw has the loosest tolerances, and accepts a 4mm nut and hex screw to snug it up. I placed the nut and bolt on top, as with a 56mm aperture, this scope should be mounted as close to the bore as possible, and the added height of the nut and bolt for the sun shade would not help with that. This is the version I am recommending, as it should require less post-processing than the others.
The v5 "outsert" and the 8mm tall insert are the models I would suggest to print. The other inserts are not as effective at eliminating the scope glare, and may have potential to come loose if not glued into the sun shield. The other sun shield ("outsert") models will require some post-processing to fit the scope if the scaling is not perfect. The 8mm tall insert fits best, and has the honeycomb structure throughout the entire height of the model. It has 4mm holes with .48mm walls. I may revise this to .5mm, as it seems some slicers may not print walls these thin if you are using a .4mm nozzle.
The older honeycomb's holes are sized at 5.9mm (in order to allow as much light through as possible while still hopefully stopping airsoft BB's) with a .8mm wall between them.
The square grid pattern views clear, but if your retraction settings aren't perfect, it will have defects. The holes are 3mm with a .4mm wall between them. The square grid doesn't look as cool, but seems to print faster, and with its deeper walls and tighter spacing, seems to be more effective as a killflash. I might re-do or add another honeycomb pattern, later.
I designed this to use inserts so that they could be replaced if broken (as this is primarily for airsoft), if I wanted to change the design, and so that I could avoid having to print with supports.
The v2 "outsert" has very tight tolerances, so test a small portion of the print first to ensure it will fit. The v4 has slightly looser tolerances and a few other cosmetic changes.
v5, the version with the opening for a nut and screw has the loosest tolerances, and accepts a 4mm nut and hex screw to snug it up. I placed the nut and bolt on top, as with a 56mm aperture, this scope should be mounted as close to the bore as possible, and the added height of the nut and bolt for the sun shade would not help with that. This is the version I am recommending, as it should require less post-processing than the others.
Similar models
thingiverse
free
Killflash 40mm by Tikker
...m by tikker
thingiverse
40mm killflash to protect you airsoft scope.
i printed it 0,1mm layers and from abs.
feel free to share.
thingiverse
free
Killflash_3x-9x_50mm_scope by ChrisEngineering
...tle effort.
i am using it for the scope of my airsoft rifle.
the killflash was tested during an airsoft battle and it works fine.
thingiverse
free
Scope Anti Glare Cover/ Scope Cover by KeiserZA
... not intend, or want others to make money off of other peoples work.
update:
i have added two more sizes on here: 28mm and 48mm
thingiverse
free
customizable killflash anti-reflection device by yetruin
...be for greater standoff or retention. slip-on tubes should generally be longer.
this is my first design! please leave feedback :)
thingiverse
free
Airsoft 40mm Scope GoPro Session Mount by JokerToolWorks
...r the camera, a one-piece design, and better tolerances. the file has been uploaded and i'm printing the prototype right now.
thingiverse
free
Sunshade for Simmons 3-9X50 Scope by GibsonJ
...#39;s a little tight. stop the print when it starts to add the top layer, or just take a razor knife to it later to clean it up.
thingiverse
free
killFLASH for ACOG 4x32 airsoft by Falkonson
...ld be printed with a wall thickness of 1 mm.
grid withstood several shots at close range. 0.3 gram ball, spring 150. printed pla.
thingiverse
free
Lens/Scope protector (airsoft) by Awesomeness3D
...s, either brass knurls or nuts
works with any thickness polycarbonate sheets, tested with 2mm and 4mm.
recommend printing in petg
thingiverse
free
Golden Sun The Lost Age Clock by Floowey
... is, a small washer nut may be necessary to hold it in place.
spray painted it with gold and bronze spray paint after printing.
thingiverse
free
Killflash_3-9x40mm_scope_press_fit by ChrisEngineering
... of the scope. the outer diameter of the scope is 47mm and the killflash can be pressed onto the scope via the displacement ribs.
Mattastrophe
thingiverse
free
HC-SR04 Housing by Mattastrophe
...lants. 2x 3mm screws and nuts are used to attach the lid to the case, and can be used for mounting to something else, if desired.
thingiverse
free
Killflash for Leapers 4x32 AO by Mattastrophe
...ve ratchet.
a test model (ring0752) is also provided to ensure your scale is correct, or to allow you to scale for other scopes.
thingiverse
free
Killflash for Barska 6-24x44 IR by Mattastrophe
...ll-width print for materials with more give (such as nylon).
as with the other killflash tool, this uses a 1/4" drive tool.
thingiverse
free
Mobius Camera 7x lens IR filter spacer by Mattastrophe
... narrow area presses against the camera board, and it is important that nothing is touching (or pressing on) the chip's lens.
thingiverse
free
Indirect plant watering system by Mattastrophe
...se in a transparent material or with provisions for a viewport to see water levels, so the design is likely to change again soon.
thingiverse
free
ESS Goggles 30x10mm Fan and 9V Battery Housing by Mattastrophe
...s later on.
for the version with the switch, i am using a rocker switch that i picked up from microcenter, part 54-870 from nte.
Ncstar
turbosquid
free
Sniper Scope (NCSTAR)
...
royalty free 3d model sniper scope (ncstar) for download as on turbosquid: 3d models for games, architecture, videos. (1521154)
turbosquid
$3
NcStar Mar9 (AR.M16 Mount)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$50
SIGHT NcSTAR STM3942G 3D Model
...og gamemodel 3dmodel lowmodel 3dlowmodel 3942 3942g/d download downloadmodel
sight ncstar stm3942g 3d model dobriu 97976 3dexport
turbosquid
$3
NcStar Mar8 (AR-15) Mount
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
sketchfab
$5
NcSTAR Blue Laser
...tiny rail mount.
model have one pbr material in 4k.
made in blender. - ncstar blue laser - buy royalty free 3d model by akinaro
thingiverse
free
NcStar Vism Delta Mounts
...on the left side (mirror for right side)
(9) rmr all sides
(10) picatinny all sides
it is secured with a 1-1/2" #8-32 screw.
thingiverse
free
Front Sight Insert for NCStar Universal Rear Sight Tool by Tpierce89
...e stl file was created from the exact dimensions of the part. this allows him to use his rear sight tool on front sights as well.
thingiverse
free
Project: 3D Printable DP Red Dot by U2LN
...of the chinese airsoft red dot often marketed as "ncstar dp". currently only the base is...
thingiverse
free
Gamo P-25 Accessory Mount by rich909
...rich909 thingiverse gamo p-25 pellet pistol accessory mount for ncstar laser sight #atpls and possibly other similar tactical sights,...
Killflash
thingiverse
free
Killflash by Ghost_Design
...killflash by ghost_design
thingiverse
killflash for 30mm tube
thingiverse
free
AUG A1 Scope Killflash
...aug a1 scope killflash
thingiverse
a basic killflash for the aug a1 scope.
thingiverse
free
Killflash 40mm by Tikker
...m by tikker
thingiverse
40mm killflash to protect you airsoft scope.
i printed it 0,1mm layers and from abs.
feel free to share.
thingiverse
free
Scope Extender / Killflash by MonoDani
...scope extender / killflash by monodani
thingiverse
scope extender / killflash für das pirate arms 3-9x44
thingiverse
free
KILLFLASH for MB4412 Sniper Scope by Hamza5737
...he printing.
information:
the first target of my future projects is a highcap for the mb4412d. if you are interested, stay tuned!
thingiverse
free
Killflash for Barska 6-24x44 IR by Mattastrophe
...ll-width print for materials with more give (such as nylon).
as with the other killflash tool, this uses a 1/4" drive tool.
thingiverse
free
Vector Maverick Killflash by M4zor
...6 mm.
use as fine print as you can because fine threads.
depending you slicer settings, you may need to clear the print a little.
thingiverse
free
Scope sunshade / killflash / protector by snakebitey
...scope sunshade / killflash / protector by snakebitey
thingiverse
couple of different grid sizes for a 60mm od 55.9mm id sunshade
thingiverse
free
Killflash for Leapers 4x32 AO by Mattastrophe
...ve ratchet.
a test model (ring0752) is also provided to ensure your scale is correct, or to allow you to scale for other scopes.
thingiverse
free
Vector Optics Maverick KillFlash / Scope Protector
...ave a well-calibrated machine, then it's drop-in.
use as fine resolution as one can.
v. 25 is scaled version of the killflash
Sun
3d_export
$5
sun oracle sun fire x4170
...sun oracle sun fire x4170
3dexport
sun oracle sun fire x4170
3d_export
$5
sun
...sun
3dexport
3d_export
$20
sun
...beautifully. ~ 100,000 for the sun ring ~ 100,000 for the sun face everything in a convenient obj format. dragonwahlnus*gmail*com
turbosquid
free
Sun
...sun
turbosquid
free 3d model sun for download as max on turbosquid: 3d models for games, architecture, videos. (1482222)
3d_ocean
$3
Sun
...ine. .blend end .obj files included. uv unwrapped and material, texture is applied. texture size is 1024×512. sun glow effects...
turbosquid
$25
Sun
...sun
turbosquid
royalty free 3d model sun for download as fbx on turbosquid: 3d models for games, architecture, videos. (1635393)
turbosquid
$3
Sun
...n
turbosquid
royalty free 3d model sun for download as blend on turbosquid: 3d models for games, architecture, videos. (1484318)
3d_export
$12
sun model
...sun model
3dexport
3d model sun prop.
turbosquid
free
The Sun
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
symbol sun
...symbol sun
3dexport
3 d model symbol sun
Shield
3d_export
$5
shield
...shield
3dexport
shield
3d_export
$5
Shield
...shield
3dexport
shield and a spear
3d_ocean
$6
Shield
...shield
3docean
game shield low polygon mei evil shild old shield shield
2048 texture obj,fbx,blend game ready.
3d_export
$5
Shield
...shield
3dexport
a shield that hasn't been made of materials will be available to everyone
3d_ocean
$4
Round Shield
...round shield
3docean
ancient battle fantasy knight medieval shield shields warrior
nice model of round shield.
3d_export
free
metal shield
...metal shield
3dexport
russian metal shield - anti-riot shield.
3d_export
$5
shield
...shield
3dexport
old shield, damaged and covered in mold. every file have a zip folder in with textures.
turbosquid
free
Shield
...shield
turbosquid
free 3d model shield for download as c4d on turbosquid: 3d models for games, architecture, videos. (1164800)
3d_export
$5
fire shield
...fire shield
3dexport
fire shield
turbosquid
$10
SHIELD
...
turbosquid
royalty free 3d model shield for download as obj on turbosquid: 3d models for games, architecture, videos. (1273553)
3
turbosquid
$10
Mountain Bike 3 -3 of 3
...model mountain bike 3 (#3 of 3) for download as fbx and blend on turbosquid: 3d models for games, architecture, videos. (1438752)
turbosquid
$6
Rock 3-3
...urbosquid
royalty free 3d model rock 3-3 for download as obj on turbosquid: 3d models for games, architecture, videos. (1628065)
turbosquid
$29
Books 150 pieces 3-3-3
...books 150 pieces 3-3-3 for download as max, obj, fbx, and stl on turbosquid: 3d models for games, architecture, videos. (1384033)
turbosquid
$3
Genesis 3 Clothing 3
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
hinge 3
...hinge 3
3dexport
hinge 3
3ddd
$1
Розетка 3
...розетка 3
3ddd
розетка
розетка 3
turbosquid
$50
is-3
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
Mountain Bike 3 -2 of 3
...model mountain bike 3 (#2 of 3) for download as fbx and blend on turbosquid: 3d models for games, architecture, videos. (1438750)
turbosquid
$10
Mountain Bike 1 -3 of 3
...model mountain bike 1 (#3 of 3) for download as fbx and blend on turbosquid: 3d models for games, architecture, videos. (1438743)
3d_export
$5
3 CATS
...3 cats
3dexport
3 cats pen holder