"Kidco's Safeway" kid's gate Catway addon by D3vilkin

Last crawled date: 3 years ago

This is a bracket used to hold the cut out post of a "Kidco Safeway" barrier to allow a Cat to go down the stairs easily.
You will need 4 x 6/32 screws of 7/8in length with matching nuts.
I have also added a thin layer of double sided tape on one of the 2 brackets to help with assembly and make it fit tighter and sturdier.
You need to cut the post to make this work.
Do not cut the bottom post all the way down.
Cut it to about 1/2 inch. That way, the bottom bracket will prevent injuries from metal edges.
Tape : https://www.3m.com/3M/en_US/vhb-tapes-us/
Barrier : https://www.kidco.com/product/angle-mount-safeway/
Disclaimer : This modification renders the Barrier unsafe for use with children.
Printing, Installing and using this device is for educational purposes only.
Using this design is not recommended and at your own risks!!!
The designer cannot be held responsible for any injuries/deaths related to this modification.
The manufacturer of the Barrier is in no way responsible nor affiliated with this design or it's designer or it's usage.
The designer also has to affiliation with the double sided tape manufacturer.