Thingiverse
Kia Stinger ALP Mounts by Swap_File
by Thingiverse
Last crawled date: 3 years, 3 months ago
Front and rear ALP mounts for KIA Stinger GT2.
Rear trunk slope measured to be 15 degrees upwards. Rear RX tilted 15 degrees downward & Rear TX tilted 14 degrees downward to compensate.
Rear TX tucks up into the left half of power lift gate release. TX fit may change on non-power lift gate models. Lift gate button is still accessible, but there is only room for a single finger.
Front plate mount slope measured to be 2 degrees upwards. Front RX tilted 2 degrees downward & Front TX tilted 1 degree downward to compensate.
Rear assembles with two 1.5 inch #6 bolts with lock nuts. Use two 30mm M6 bolts to attach to body.
Front assembles with four 2 inch #8 bolts and two #6 bolts. Use two 2 inch #10 and two 1.5 inch #8 screws to secure attach to body.
Printed out of PETG for UV resistance, 3 walls, 20% cubic infill. 0.6mm tip, .3 layer height.
Rear trunk slope measured to be 15 degrees upwards. Rear RX tilted 15 degrees downward & Rear TX tilted 14 degrees downward to compensate.
Rear TX tucks up into the left half of power lift gate release. TX fit may change on non-power lift gate models. Lift gate button is still accessible, but there is only room for a single finger.
Front plate mount slope measured to be 2 degrees upwards. Front RX tilted 2 degrees downward & Front TX tilted 1 degree downward to compensate.
Rear assembles with two 1.5 inch #6 bolts with lock nuts. Use two 30mm M6 bolts to attach to body.
Front assembles with four 2 inch #8 bolts and two #6 bolts. Use two 2 inch #10 and two 1.5 inch #8 screws to secure attach to body.
Printed out of PETG for UV resistance, 3 walls, 20% cubic infill. 0.6mm tip, .3 layer height.
Similar models
thingiverse
free
Cupholder ALP Mount by Swap_File
...ontain an alp control pad and usb cable. needs a single 6-32 1/2 inch bolt to secure the usb cable. bolt hole will self thread.
thingiverse
free
Front License Plate ALP Mount by Swap_File
...lp mount by swap_file
thingiverse
experimental front license plate alp mount. 0.5mm of tolerance for heads. 0 degrees of tilt.
thingiverse
free
EB185 15 Degree riser block by biggs2003
...thingiverse
riser block for the eachine eb185 racer. allows 15 degree upward tilt to compensate for forward pitch during flight.
grabcad
free
13-INCH IPAD PRO, SLIM ENCLOSURE
...d state of:
kronos slim enclosure for ipad pro
0/15 degree bracket
surface mount/ rear-offset mount
no power button
black/silver
grabcad
free
IPAD AIR2, SLIM ENCLOSURE
...ure for ipad air2
0/15 degree brackets
power button/ w/o power button
black/ silver
surface mount/ side mount / rear-offset mount
thingiverse
free
ALP vs Stinger mount by wrxsti15
...alp vs stinger mount by wrxsti15
thingiverse
holder for stinger and alp sensor heads. for laser testing purposes.
grabcad
free
IPAD MINI-4, SLIM ENCLOSURE
... for ipad mini-4
0/15 degree brackets
power button/ w/o power button
black/ silver
surface mount/ side mount / rear-offset mount
thingiverse
free
DQuad Obsession RX antenna mount by DiAleksi
... minimalistic design as possible, that stucks in to oval holes at the rear end of the frame. there is two 3mm holes in 90 degree.
thingiverse
free
Wyze Camera Wall Mount - 15 degree downward by enganear
... 1/4-20 hex head screw x 3/4" long to match the threads in the bottom of the wyze cam. this is a standard photography mount.
thingiverse
free
Diatone Roma F4 LR CameraBumper, Front Immortal Antenna Mount, Arm Bumper and GPS ans Buzzer Mount by JTR1
...caddx antenna mount with self powered buzzer and mini gps mount
tbs nano rx mount
tbs nano rx mount with skids
power cable mount.
Stinger
turbosquid
$50
Stinger - Pistol
...del stinger - pistol for download as blend, stl, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1665900)
turbosquid
$10
STINGER.3DS
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$9
Flashlight stinger LED
...3d model flashlight stinger led for download as fbx and blend on turbosquid: 3d models for games, architecture, videos. (1214512)
turbosquid
$7
Stinger Fighting Robot
...model stinger fighting robot for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1452771)
turbosquid
$139
Stinger Queen (Rigged)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$2
Lowpoly Tank (Stinger)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$24
FIM92 Stinger 3D Model
... mrl projectile weapon missile bomb bomber anti-tank antitank anti tank armor
fim92 stinger 3d model martialartist 22675 3dexport
turbosquid
$150
FIM92A Stinger
...uid
royalty free 3d model fim92a_stinger for download as max on turbosquid: 3d models for games, architecture, videos. (1402026)
humster3d
$75
3D model of FIM-92 Stinger
...uy a detailed 3d model of fim-92 stinger in various file formats. all our 3d models were created maximally close to the original.
turbosquid
$79
Ray Stinger Super-II Chassis
... stinger (super ii chassis) for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1502925)
Alp
turbosquid
$15
Alpes Inox Oven
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
free
provence-alpes-cote-dazur-france
...-alpes-cote-dazur-france
3dexport
the indoor swimming pool is inspired by the swimming pool at provence-alpes-cote-dazur-france.
turbosquid
$12
Alpes Inox Kitchen Sink
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$21
House Chalet Alps - Modern Cottage
... 3d model house chalet alps for download as skp, obj, and dae on turbosquid: 3d models for games, architecture, videos. (1684344)
turbosquid
$15
Alpes Inox Kitchen Furniture and Appliances
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$6
Aluminum Profile for Led (ALP-023)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
free
ALPE ARREDAMENTI SRL IRIDE PROPOSTA 1
...
высота - 2200mm
длина - 3000mm
глубина - 580mm
объем в упаковке: 4.60м3http://www.mebit.ru/catalog/walls/view-688.html
turbosquid
$79
ALPS Japan Televison Spaceman retro tin toy
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
humster3d
$75
3D model of Hino 258 ALP Tow Truck 2007
... 3d model of hino 258 alp tow truck 2007 in various file formats. all our 3d models were created maximally close to the original.
3ddd
$1
La Fabbrica THRILL FROST, ALPS
... 2014, 2013, 2011,
obj
_____________________________________http://www.lafabbrica.it/ru/collections/thrill-12#slider-10
Kia
3d_export
$10
Kia model
...kia model
3dexport
model for kia car
3ddd
$1
Комплект стеллажей KIA
... стеллаж
стеллаж, стойка и стенд для автосалона kia. размеры, форма и цвет по международному корпоративному брэндбуку kia.
3d_export
$5
kia k5
...
kia k5. there is a salon, the engine, the front and rear lights are worked out. missing textures and the lower part of the model
3ddd
$1
Kia Sportage
...kia sportage
3ddd
kia
текстуру заменил от колеса -
использовалась из сборника.
может поэтому не проходила работа
модерацию
3d_export
$9
KIA Logo 3D Model
...s vehicle part of avto transport 3d model logo emblem detailed high qvality kia kia kia
kia logo 3d model rmodeler 36598 3dexport
3ddd
$1
Зона ожидания автосалона KIA
... kia
зона ожидания автосалона kia. размеры, форма и цвет взяты из официального международного брэндбука kia.
turbosquid
$59
Kia Sorento
...y free 3d model kia sorento for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1432758)
3d_ocean
$89
Kia soul 2010
...north american debut of the all-new kia soul passenger vehicle at the 2008 los angeles auto show. designed in southern califor...
turbosquid
$59
KIA Ceed
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$19
KIA logo 3D Model
...kia logo 3d model
3dexport
kia logo car logotype simbol
kia logo 3d model promax 86857 3dexport
Swap
3d_export
free
simple grass
...grass scene with procedural texture for grass, is better swap the texture of grass by...
3d_export
$12
Classic bed_2 3D Model
...gregorian high quality good cheap classic bed_2 3d model swap 3233...
3d_export
$10
Classic bed 3D Model
...gregorian high quality good cheap classic bed 3d model swap 3232...
3d_export
$10
Classic bed_3 3D Model
...gregorian high quality good cheap classic bed_3 3d model swap 3234...
3ddd
$1
Комод bizzotto Iris art. 925
...которые установлены в multi/sub - object и меняются методом swap на первый id полигонов...
3d_ocean
$25
Mech Set #1
...this product features four modular parts that can be swaped out for other parts if...
3d_export
$30
spacecraft spaceship scifi
...good topology (polygon quad only) each material can be swaped or change normal and specular/glossyness texture included. available in...
3d_export
$30
spaceship scifi pbr realistic
...good topology (polygon quad only) each material can be swaped or change normal and specular/glossyness texture included. available in...
3ddd
$1
Прикроватная тумба bizzotto Voyage Prive art. 559
...во второй id multi/sub-object корпуса модели и меняется методом swap на первый...
3d_ocean
$12
Flip Video Camera
...screen image on the back that can easily be swaped out with your logo or whatever u want! two...
Mounts
3d_export
free
mounting bracket
...the part of a hinge, handle or latch that mounts the hardware to a cabinet. mounting plates make it...
turbosquid
$2
MOUNTING
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Mounts
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Mount Fuji
...fuji
turbosquid
free 3d model mount fuji for download as obj on turbosquid: 3d models for games, architecture, videos. (1579977)
3d_export
$5
Headphone mount LR
...headphone mount lr
3dexport
headphone mount l+r
turbosquid
$39
Mount rainier
...quid
royalty free 3d model mount rainier for download as fbx on turbosquid: 3d models for games, architecture, videos. (1492586)
turbosquid
$5
pipe mounting
...quid
royalty free 3d model pipe mounting for download as obj on turbosquid: 3d models for games, architecture, videos. (1293744)
turbosquid
$3
Mounting Tires
...uid
royalty free 3d model mounting tires for download as fbx on turbosquid: 3d models for games, architecture, videos. (1708511)
3d_export
$5
Magnetic GoPro Mount
...pro mount
3dexport
cool magnetic mount for gopro. allows you to mount the camera on flat metal surfaces and get exclusive shots.
turbosquid
$5
Stone Mount
...ty free 3d model stone mount for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1370306)
File
archibase_planet
free
File
...file
archibase planet
locker box archive
fp suspension file wh - 3d model (*.gsm+*.3ds) for interior 3d visualization.
turbosquid
free
File
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_ocean
$5
Filing cabinet
...filing cabinet 3docean cabinet chair desk file filing locker office paper storage store work a simple...
turbosquid
$8
Filing cabinets
...id
royalty free 3d model filing cabinets for download as fbx on turbosquid: 3d models for games, architecture, videos. (1371140)
turbosquid
$8
File Cabinet
...squid
royalty free 3d model file cabinet for download as fbx on turbosquid: 3d models for games, architecture, videos. (1572208)
turbosquid
$16
Filing Cabinet
...ree 3d model filing cabinet for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1310873)
turbosquid
$2
File Cabinet
... free 3d model file cabinet for download as obj, c4d, and fbx on turbosquid: 3d models for games, architecture, videos. (1357577)
turbosquid
$12
Nail File
...e 3d model nail file for download as blend, obj, fbx, and dae on turbosquid: 3d models for games, architecture, videos. (1588508)
turbosquid
$5
File Organiser
...model file organiser for download as blend, obj, fbx, and dae on turbosquid: 3d models for games, architecture, videos. (1636447)
turbosquid
$1
Flat file
...e 3d model flat file for download as 3ds, obj, md3, and blend on turbosquid: 3d models for games, architecture, videos. (1209808)