Thingiverse
KeyHide by aurelius
by Thingiverse
Last crawled date: 5 years, 2 months ago
Usable with different Key types
Mountable with 2 Screws, glue or double-sided tape (screws preferred)
Under desk or wall assembly, your choice
Best results with PLA / ABS, 2 Perimeter, 3 full Top/Bottom Layers, 50% honeycomb infill with a 0.4 mm nozzle.
If your printer melts the feather holder gap with the bottom, you must cut them free.
Mountable with 2 Screws, glue or double-sided tape (screws preferred)
Under desk or wall assembly, your choice
Best results with PLA / ABS, 2 Perimeter, 3 full Top/Bottom Layers, 50% honeycomb infill with a 0.4 mm nozzle.
If your printer melts the feather holder gap with the bottom, you must cut them free.