Thingiverse
Kent Dust Boot Adapter for CNCROUTERPARTS Avid CNC Spindle from Bosh 1617 by ubergeekseven
by Thingiverse
Last crawled date: 3 years, 5 months ago
Adapter ring with cutout in case you purchased the kent dust boot for a bosch router. the original dust boot is 90mm in diameter and the spindle from cncrouterparts/avid cnc is 80mm.
I did not want to have to buy a new one or create one from acrylic. This quick print costs so little and works so well.
With the cutout on the side, the retaining adjustment on the dust boot works perfectly still. It took about 2 hours to print at 40% infill out of pla. It was the filament I already had in the printer and unless the spindle heats up enough to melt this thing, which would be a wwhole other problem, then it should last.
I did not want to have to buy a new one or create one from acrylic. This quick print costs so little and works so well.
With the cutout on the side, the retaining adjustment on the dust boot works perfectly still. It took about 2 hours to print at 40% infill out of pla. It was the filament I already had in the printer and unless the spindle heats up enough to melt this thing, which would be a wwhole other problem, then it should last.
Similar models
thingiverse
free
80mm Dust Boot (Avid CNC) by iporty
...ear pipe i used. it's 2.5 in diameter
powertec-70176-2-inch-36-inch-clear
link to the fusion 360 file https://a360.co/32ujea6
thingiverse
free
PwnCNC 90 degree dust boot hose adapter
...cnc v2 dust boot to hook up to the blue flex dust hose from rockler. the adapter is designed to work with a 1.5" i.d. hose.
thingiverse
free
Dust Collector to Shop-Vac Hose Adapter by yergacheffe
...o the 1.75" hose from my shop-vac.
i largely work in solidworks these days, so that's the cad file format uploaded here.
thingiverse
free
Dust Boot for Shopbot Buddy by spacejunkie9
...for shopbot buddy by spacejunkie9
thingiverse
dust boot attachment for a 75mm spindle (like the one found in the shopbot buddy).
thingiverse
free
Dust Boot for StepCraft MM-1000 DI spindle by hwiguna
...ork well for flat end mills. the dust you see in photo is from using a v-groove to chamfer an edge.
https://youtu.be/xrdfsgfrvxg
thingiverse
free
Dust Shoe for CNC by antosha99
...shoe for my cnc machine. the fusion file is attached if you want to make your own adapter for the vacuum hose. for 80 mm spindle.
thingiverse
free
Inventables X-Carve w/ Standard Spindle Dust Boot, 1-1/4 Vacuum Hose Adapters for Cyclonic Dust Collector by neversummer78
...ional mount for ip camera as add on to fan mount.
redesign cyclone_dust_collector_to_bucket_adapter.svg to be used without lid.
thingiverse
free
Dust Shoe for 80mm Spindle by LisBonMeKat
...dust shoe for 80mm spindle by lisbonmekat
thingiverse
to collect dust from cnc..
thingiverse
free
Festool 36 mm to Suck It Dust Boot Adapter by danofcanada
...mm making it a tight fit.
i haven't run the machine yet as i need to create something to secure the hose to the top of the z.
thingiverse
free
Shopvac adapter for Sienci Labs' CNC dust boot by jdaveiga
...et me know what you think and how it works out for you.
also in here are the stl, the f360 file, the simplify 3d file, and an obj
Ubergeekseven
thingiverse
free
bottleworks aluminum arms on the mbot cube by ubergeekseven
...d upgrade that includes adding new linear rods for the z axis. i'll upload more info soon on what is needed to complete this.
thingiverse
free
Aerohive Beam Mount by ubergeekseven
...ws. (2) #6 flat washers. (2) #6-32 nylone lock nuts.
i printed it at 100% infill at .3mm layer height. just for quick printing.
thingiverse
free
Power Button Ear Gauges. Or Ear Spacers by ubergeekseven
...o be able to add a pwm led circuit to mimic a sleeping computer. but, i cant find a circuit small enough. maybe someone else can.
thingiverse
free
SMOS Dex Dock for Samsung Galaxy Phones by ubergeekseven
...se with mine. this will also give support to the backside of the phone so that there is no damage to the usb port on your device.
thingiverse
free
Articulating Laptop Phone Stand by ubergeekseven
...gn that one part. i may make it mechanically adjustable at some point. but i get bored too easy and mov e on to the next project.
thingiverse
free
Microsoft Surface Pen 4 - Accurate Model For Design Use by ubergeekseven
...use autodesk inventor, but with these different file types, you should be able to make modifications to the model if you want to.
thingiverse
free
2017 and maybe others, Honda Odyssey phone mount somewhat universal by ubergeekseven
... or some rubber strip to the base so that it prevents any slipping while in transit if the phone is not in a tpu or similar case.
thingiverse
free
Note 3 VR Headset Dive cardboard by ubergeekseven
...h it and i will try to figure out how to fix them.
also, the lenses, the strap, foam and bolts are the only thing not 3d printed.
thingiverse
free
Epoxy Cup Turner Mostly Parametric Insert Holders by ubergeekseven
...y this will make your project easier and please upload any remixes so that others can have the size needed without modifications.
thingiverse
free
Pen Stand - Microsoft Surface Pen 4 or pretty much any other pen by ubergeekseven
...y and possibly the pen tip container that comes with the surface pen 4. i will leave all of the models for download if i do that.
1617
thingiverse
free
CRP4896PRO E3D V6 Adapter for Bosch 1617 Router Mount by FBEpyon
...thingiverse
this project was made to adapt my crp4896 so that i could hold a e3d v6 in the evs bosch 1617 mount.
works great...!
thingiverse
free
X-Carve Bosch 1617 Mount by tdukes
...int. the back plate will be the same. there are two fronts. one for a jtech laser and one without.
this is untested at this time.
thingiverse
free
Bosch 1617 Fixed/Plunge Router Accessory Tools Holder by cheesemcgee
... you can mount to either your fence, or the leg of your router table.
it was designed to use 4 #8 screws to mount to the surface.
thingiverse
free
Bosch 1617 LED Air Deflector
...d nut in it. it was just big enough. the dust shroud is made by kent, i believe. cncrouterparts/avid cnc recommended this shroud.
thingiverse
free
Dust Port Attachment for Bosch 1617 Plunge Base Router by B_Rich
...is my first upload ever to thingiverse, and it's my first 3d printed part that i designed myself as well. thanks for looking.
thingiverse
free
90mm Spindle Mount, DW618, Bosch 1617, Porter Cable 892, 690 by transcendReality
...trip. the two holes that mount to the c-beam take low profile, 15mm, m5's with t-slot nuts.
testing and pictures coming soon.
thingiverse
free
My own Maker Coin by enekomontero
...to create one. download it if you like it. http://haudahau.com/vadedos/?p=1617sthash.bpblxo8z.dpbs ...
thingiverse
free
Napier's Bones (Manual Calculator) by Gyrobot
...is a manually-operated calculating device created by john napier (1550-1617. using the multiplication tables embedded in the "bones", multiplication...
thingiverse
free
MDF Spoilboard for Avid Benchtop Pro 2x2 by infinity111
...cut using a 1/4" end mill and a bosch 1617 router on an avid benchtop...
Cncrouterparts
thingiverse
free
Benchtop PRO CNC 3D Sign for by CNCRouterParts
...rve pro to quickly layout and generate cnc gcode.
here is a video showing how this was made https://youtu.be/-ywr-m5aidw
thanks!
thingiverse
free
Bamboo Wine Glass Holders by CNCRouterParts
...cncrouterparts), as well as the "multi-board" gcode that makes 8 boards from one 2'x2' sheet of bamboo plywood.
thingiverse
free
iPhone 5 5c Simple Slate Stand (CNC or 3D Print) by CNCRouterParts
...hick (program will cutout to depth of .7625")
cnc tools required (2):
1: 1/4" flat end mill
2: 1/8" flat end mill
thingiverse
free
Snap & Glue Birdhouse (CNC) by CNCRouterParts
... glue
paint/stain
source files
all sources (.zip)
vectric vcarve project file (.crv)
cnc router parts project listing
thingiverse
free
Pacman Yard Art (Stakes Included) CNC or Large Format 3DP by CNCRouterParts
...tool: .25" flat endmill
visit our website for cnc machines, cutting tools, and more sample projects! www.cncrouterparts.com
thingiverse
free
Solid Body Ukulele (2.5D CNC Project) by CNCRouterParts
...e strings (like these)
source files
fusion 360 f3d project file
ukulele bridge stl (3d print)
thingiverse project listing
thingiverse
free
Home Key Ring Center - CNC VCarve PRO by CNCRouterParts
...ing center project
watch our video walk-through to see how we designed and made this project in vcarve pro 8.5 or vectric aspire!
thingiverse
free
PRO Series "CNC Router Parts" Spoilboard by CNCRouterParts
... you can watch that video and the part ii cnc video and don't need to watch the vectric project walkthroughs and vice-versa).
thingiverse
free
CNC Spindle and Router Dust Shoe (Customizable) by CNCRouterParts
...ative direction between some operations (likely going through your project spice and spoilboard).
enjoy your cleaner work space!
Kent
thingiverse
free
Superman/ Clark Kent by jacob70000
...superman/ clark kent by jacob70000
thingiverse
superman/ clark kent art piece.
thingiverse
free
Sundial West Malling Kent by darrenlong88
...sundial west malling kent by darrenlong88
thingiverse
a sundial configured for west malling, kent, uk.
thingiverse
free
Rocktopus by Kent Johnson by HarlemSquirrel
...d yeoldebrian.
source: https://www.lulzbot.com/content/meet-rocktopus
kent, if you don't want this up here, just let me know!
thingiverse
free
April Kent - NMHU by parachutefactory
.... the capsule is being placed at the site of the newly constructed student center.
the plan is to open the capsule in 50 years.
thingiverse
free
CHRISTOPHER REEVE Clark Kent's Head by Masterclip
...eeve clark kent's head by masterclip
thingiverse
remixed from:
https://sketchfab.com/models/d0348d6400f24e5d9d1962345001f0d5
thingiverse
free
Kent Marine 94L Skimmer Guard For Small Fish by UltiUser
...ht into the large surface skimmer holes so this guard helped keep them safe while they grew.
i printed it flat with pva supports
thingiverse
free
superman clark kent s glasses ochialli lunettes eyewear by Optimaker1
...n clark kent s glasses ochialli lunettes eyewear by optimaker1
thingiverse
draw easily on www.optimaker.eu see on www.lu-net.fr
thingiverse
free
Cave Shield for the Kent Tooling Inspiration Rebreather Frame by mikeller
...eight of around 700 grams. the holes match up the holes in the frame, and can be bolted on with 8mm x 12mm stainless steel bolts.
thingiverse
free
Kent State - Dix Stadium by Mag-net
...r i put it through netfabb. "the_stadium_dix_kent_state_face_fix_2_repaired.stl"
it's better but still needs work.
thingiverse
free
Kent Fish Scrapper Razor Insert by grtbaldini
...r before you slide the razor blades in. if you need to remove the blades, use needle nose pliers to help pull them out for safety
Bosh
thingiverse
free
sleeve Bosh by datixx
...sleeve bosh by datixx
thingiverse
втулка для блендера bosh
thingiverse
free
Bosh pfs trigger by dom98111
...bosh pfs trigger by dom98111
thingiverse
bosh pfs trigger
thingiverse
free
scie sauteuse bosh by Pachypodium
...scie sauteuse bosh by pachypodium
thingiverse
truc de scie sauteuse bosh
thingiverse
free
Bosh MCM64085 coupling by alexesDev
...bosh mcm64085 coupling by alexesdev
thingiverse
this is a coupling for food processors bosh mcm64085
thingiverse
free
Knob for Bosh TAT6101 toaster by AlexRyzh
...knob for bosh tat6101 toaster by alexryzh
thingiverse
knob for bosh tat6101 toaster
thingiverse
free
Adattatore rotorbitale Bosh by gran
...adattatore rotorbitale bosh by gran
thingiverse
adattatore per aspiratore
thingiverse
free
Vacuum adapter for Bosh rotary sander by remi67
...cter l'embout d'une ponceuse rotative bosh à un aspirateur.
connects the tip of a bosh rotary sander to a vacuum cleaner.
thingiverse
free
Chave de seleção para furadeira Bosh by mgleycon
...chave de seleção para furadeira bosh by mgleycon
thingiverse
chave de seleção para furadeira bosh
thingiverse
free
level bosh gear by Nekri
...level bosh gear by nekri
thingiverse
шестерня для нивелира бош
bosch level gauge
thingiverse
free
Bosh Colt Shapeoko Mount by blanius
...added a 90mm "notch" to help keep it from rotating when under stress. this is based on the shapeoko z-plate of 100x90mm
Avid
thingiverse
free
Avid CNC Touch Plate Holder by kitfox1997
...avid cnc touch plate holder by kitfox1997
thingiverse
avid cnc touch plate holder
thingiverse
free
Touch Plate Holder Avid CNC by kitfox1997
...touch plate holder avid cnc by kitfox1997
thingiverse
avid cnc touch plate holder
thingiverse
free
Bar clamp for Avid breaks by Ormerod281
...d281
thingiverse
attention!
use this on your own risk!
this is a clamp fitting to most
avid breaks such as juicy and elixir.
thingiverse
free
Avid Grease Gun Holder by nolaled504
...r by nolaled504
thingiverse
grease gun holder designed for my avid cnc machine, but can also be use in a wall mount application.
thingiverse
free
Avid BB7 (and others?) Boots for calipers by magrinds
...tuated disc brakes for bicycles. best to print in a flexible material.
i think these are even better than the original from avid.
thingiverse
free
Avid Aircraft Fuel Tank LIght by kenkelso
...giverse
the level of the fuel in the avid tanks is hard to see through the fibre glass sight holes. these led lights help a lot.
thingiverse
free
Avid CNC Stop Button Holder by kitfox1997
...ingiverse
avid cnc stop button holder.... may be front mounted or mounter behind extrusion to minimize the button stick out....
thingiverse
free
Avide desk lamp headphone holder by IDonotCar3
...ngiverse
avide led desk lamp headphone holder. quick modelling and printing. no other things needed, easy install, tight enough.
thingiverse
free
Avid Elixir Brake Spacer (Fake Rotor) by SubSeven
...e rotor) by subseven
thingiverse
avid elixir brake rotor spacer. it will fit all the elixir brakes with 2 strokes (elixir 5,7,9)
thingiverse
free
ZTE Avid Plus Case by fhardrock
... with customizer. it is not working for whatever reason. if you know why let me know so i can fix it and get it working correctly
Boot
thingiverse
free
mercedes Boot
...mercedes boot
thingiverse
boot
thingiverse
free
BOOTS by TimHaines
...boots by timhaines
thingiverse
boots!
thingiverse
free
Minecraft Steve Boots Armor Boot by eddie2799
...minecraft steve boots armor boot by eddie2799
thingiverse
minecraft steve boots armor boot
thingiverse
free
boot by andr56338
...boot by andr56338
thingiverse
ski boots
thingiverse
free
Boot Heel by romiusgod
...boot heel by romiusgod
thingiverse
boot heel, for 4 pin boots
thingiverse
free
boot by ali222
...boot by ali222
thingiverse
this is a boot that i made. you can use this for figures, dolls and more.
thingiverse
free
Boot Knife by danielferal
...boot knife by danielferal
thingiverse
boot knife
thingiverse
free
Boot by mocapca
...ged).
http://data.mocap.ca/
check out clubclay's printable version of this boot:
http://www.thingiverse.com/thing:94470
thingiverse
free
boot by TheBigTricky
...boot by thebigtricky
thingiverse
thingiverse
free
Rain Boot by mrhers2
...rain boot by mrhers2
thingiverse
rain boot that is 2.5 cm tall
Spindle
thingiverse
free
Spindles by jfalestiny
...spindles by jfalestiny
thingiverse
spindle
thingiverse
free
spindle Plate by Sevenmead
...rse
this is a spindle plate which adapts the spindle holder for the widely available 600w cnc router spindle to my bearing plate
thingiverse
free
Spindle fastening by NovikOff
...spindle fastening by novikoff
thingiverse
spindle fastening
thingiverse
free
microwave spindle by csfnox
...microwave spindle by csfnox
thingiverse
microwave spindle
thingiverse
free
Spindle Bowl by dfrederick
...spindle bowl by dfrederick
thingiverse
this is a simple spindle bowl i designed for my russian spindle by straddle creek spins.
thingiverse
free
Spindle by rishifranklin
...f of a bldc motor where a weight suspended from the spindle will turn the shaft of the motor as it falls.
2.76 mm shaft diameter
thingiverse
free
solid spindle by acetrex
...solid spindle by acetrex
thingiverse
just a solid spindle
thingiverse
free
Spindle holder by jglauche
...che
thingiverse
this is a simple spindle holder for my nichrome wire spindle. i designed it in 2d and extruded it with openscad.
thingiverse
free
spindle mount by halber
...spindle mount by halber
thingiverse
spindle mount for a cnc machine.
thingiverse
free
Earbud Spindle by pcalderone17
...earbud spindle by pcalderone17
thingiverse
earbud spindle by peter calderone
Dust
thingiverse
free
Dust Separator
...dust separator
thingiverse
this is a dust separator similar to the "dust deputy"
thingiverse
free
dust deputy to xcarve dust boot adapter
...e coupler to interface an inventables xcarve dust shoe hose (1.5"id) to an oneida dust deputy cyclone extractor (2"od).
thingiverse
free
DUST HOLDER by frasart
...dust holder by frasart
thingiverse
dust holder
thingiverse
free
DUST NOZZLE by frasart
...dust nozzle by frasart
thingiverse
dust nozzle
thingiverse
free
Dust remover
...l piece of sponge to each part. with the sponges this tool will remove all the dust from your filament and will prevent cloaking.
thingiverse
free
drill dust blower
...drill dust blower
thingiverse
drill dust blower
thingiverse
free
CXP Dust Cap
...cxp dust cap
thingiverse
cxp dust cap
thingiverse
free
Dust Filter by galeev
...dust filter by galeev
thingiverse
simple filament dust filter
thingiverse
free
Dust collector by Rachdie23
...dust collector by rachdie23
thingiverse
a dust collector for my saw
thingiverse
free
Dust Remover by NArdo
...dust remover by nardo
thingiverse
prototype dust remover can
Cnc
thingiverse
free
CNC by Robi1602
...cnc by robi1602
thingiverse
cnc
thingiverse
free
CNC Feet - Nikodem CNC
...ixe-it, and they are a big hole for screw the aluminium profile (on the pictures).
enjoy and thanks nikodem for you amazing cnc !
thingiverse
free
CNC Case
...cnc case
thingiverse
control box to be used with rs-cnc or any other cnc you like.
thingiverse
free
Susferus CNC
...susferus cnc
thingiverse
susferus cnc testing
thingiverse
free
RS-CNC , the new model of R-CNC by RoMaker
...new model of r-cnc by romaker
thingiverse
the rs-cnc is the replacement of the r-cnc (https://www.thingiverse.com/thing:2159840)
thingiverse
free
Fixture- CNC by sidd200970
...fixture- cnc by sidd200970
thingiverse
cnc machine vise for diy cnc machines
thingiverse
free
Cnc Lazer by baymikro
...cnc lazer by baymikro
thingiverse
cnc lazer
thingiverse
free
CNC dusthood by Idegraaf
...cnc dusthood by idegraaf
thingiverse
dusthood for cnc
thingiverse
free
coupling cnc by poggia10
...coupling cnc by poggia10
thingiverse
coupling cnc
thingiverse
free
cnc square by MR_MUSTARD
...cnc square by mr_mustard
thingiverse
square for cnc
Adapter
thingiverse
free
Adapter
...adapter
thingiverse
adapter to use filament rolls with 72mm inside diameter
thingiverse
free
adapter by Ladehoff
...adapter by ladehoff
thingiverse
adapter
thingiverse
free
adapter by eslyuta
...adapter by eslyuta
thingiverse
adapter
thingiverse
free
Clean 45RPM adapter, single adapter
...clean 45rpm adapter, single adapter
thingiverse
clean, basic 45rpm adapter. fits most turntables.
thingiverse
free
Fan Adapter
...fan adapter
thingiverse
fan adapter
thingiverse
free
Lens adapter
...lens adapter
thingiverse
lens adapter
thingiverse
free
Fahrradventiel Adapter
...fahrradventiel adapter
thingiverse
fahrradventiel adapter
thingiverse
free
adapter with by dougthegr8
...adapter with by dougthegr8
thingiverse
adapter holder
thingiverse
free
gopro adapter
...gopro adapter
thingiverse
angal adapter for gopro
thingiverse
free
Socket Adapter
...socket adapter
thingiverse
hand twist socket adapter