Thingiverse
Kcs key loop
by Thingiverse
Last crawled date: 6 years, 6 months ago
My key chain got too heavy and voluminous, so I needed something to clean it all up.
In the end, I replaced everything by this small thing that keeps my keys flat on each other, so they won't take up too much place in my pocket.
You also need an M3 screw and nut. The screw length depends on the number of keys you want to attach. In my case, 3 keys went just fine with a 12mm M3 screw. In case you need a longer screw, you propably also want to make the loop length longer (in customizer) to fit your needs.
I print this thing in PETG, but PLA should propably be ok.
In the end, I replaced everything by this small thing that keeps my keys flat on each other, so they won't take up too much place in my pocket.
You also need an M3 screw and nut. The screw length depends on the number of keys you want to attach. In my case, 3 keys went just fine with a 12mm M3 screw. In case you need a longer screw, you propably also want to make the loop length longer (in customizer) to fit your needs.
I print this thing in PETG, but PLA should propably be ok.